Loading ...
Sorry, an error occurred while loading the content.
 

Re: [nslu2-linux] Poor man's iolan?

Expand Messages
  • CORNELIU DOBAN
    I m using SugOS on memstick (but I suppose it will fit in the 8MB internal flash if desired) with screen and picocom to connect to a SheevaPlug serial to
    Message 1 of 8 , Apr 21, 2010
      I'm using SugOS on memstick (but I suppose it will fit in the 8MB internal flash if desired) with "screen" and "picocom" to connect to a SheevaPlug serial to usb adaptor.

      The installation steps are posted here:
      http://plugcomputer.org/plugforum/index.php?topic=124.0

      Regards,
      Corneliu

      --- On Tue, 4/20/10, Mark Kelly <mekelly5@...> wrote:

      From: Mark Kelly <mekelly5@...>
      Subject: Re: [nslu2-linux] Poor man's iolan?
      To: nslu2-linux@yahoogroups.com
      Received: Tuesday, April 20, 2010, 8:20 PM

       

      Openwrt will definitely work for what you are trying to do.  It will fit just fine in the on board memory.  If by an iolan you are simply trying to accomplish serial to ethernet conversion, then simply install openwrt, and use the built in package manager to install ser2net as was mentioned before and you will be able to use both usb ports for usb to serial adapters.  I've done this many, many times and it works great.  Only hiccup is making sure you install the correct kernel models for your usb dongles, but you can do that with the package manager also.

      On Tue, Apr 20, 2010 at 9:26 PM, DaylanDarby <DaylanDarby@ gmail.com> wrote:
      Completely embedded? I thought that all but the original linksys was too
      big to fit entirely within the Slug?

      Note I wanted both USB ports for iolan (not one for USB stick/drive
      holding OS).

      Mike Westerhof (mwester) wrote:
      >
      > DaylanDarby wrote:
      > > I'm looking to convert one of my slugs to a poor man's iolan (with 2
      > USB
      > > ports).
      > >
      > > I figure to do this I need 'screen' (or equivalent) and serial and
      > > network drivers - nothing else.
      > >
      > > Has anyone been able to embed a stripped down debian on the box itself
      > > (no external drives)?
      > >
      > > If so I'd like a pointer to your URL or information on how to do this.
      > >
      >
      > This is pretty much what SlugOS does. OpenWRT will also do the job.
      >
      > -Mike (mwester)
      >
      >



      ------------ --------- --------- ------

      Yahoo! Groups Links

      <*> To visit your group on the web, go to:
         http://groups. yahoo.com/ group/nslu2- linux/

      <*> Your email settings:
         Individual Email | Traditional

      <*> To change settings online go to:
         http://groups. yahoo.com/ group/nslu2- linux/join
         (Yahoo! ID required)

      <*> To change settings via email:
         nslu2-linux- digest@yahoogrou ps.com
         nslu2-linux- fullfeatured@ yahoogroups. com

      <*> To unsubscribe from this group, send an email to:
         nslu2-linux- unsubscribe@ yahoogroups. com

      <*> Your use of Yahoo! Groups is subject to:
         http://docs. yahoo.com/ info/terms/



    • Steve
      You can also put a USB stick on an unused USB port inside. It works well for me and keeps the external ones free. It requires soldering etc but the details are
      Message 2 of 8 , Apr 21, 2010
        You can also put a USB stick on an unused USB port inside. It works well for me and keeps the external ones free. It requires soldering etc but the details are on the wiki. Static precautions of course :)
        Steve

        --- In nslu2-linux@yahoogroups.com, CORNELIU DOBAN <corneliu_doban@...> wrote:
        >
        > I'm using SugOS on memstick (but I suppose it will fit in the 8MB internal flash if desired) with "screen" and "picocom" to connect to a SheevaPlug serial to usb adaptor.
        >
        > The installation steps are posted here:
        > http://plugcomputer.org/plugforum/index.php?topic=124.0
        >
        > Regards,
        > Corneliu
        >
        > --- On Tue, 4/20/10, Mark Kelly <mekelly5@...> wrote:
        >
        > From: Mark Kelly <mekelly5@...>
        > Subject: Re: [nslu2-linux] Poor man's iolan?
        > To: nslu2-linux@yahoogroups.com
        > Received: Tuesday, April 20, 2010, 8:20 PM
        >
        >
        >
        >
        >
        >
        >
        >  
        >
        >
        >
        >
        >
        >
        >
        >
        >
        > Openwrt will definitely work for what you are trying to do.  It will fit just fine in the on board memory.  If by an iolan you are simply trying to accomplish serial to ethernet conversion, then simply install openwrt, and use the built in package manager to install ser2net as was mentioned before and you will be able to use both usb ports for usb to serial adapters.  I've done this many, many times and it works great.  Only hiccup is making sure you install the correct kernel models for your usb dongles, but you can do that with the package manager also.
        >
        >
        >
        > On Tue, Apr 20, 2010 at 9:26 PM, DaylanDarby <DaylanDarby@ gmail.com> wrote:
        >
        >
        > Completely embedded? I thought that all but the original linksys was too
        >
        > big to fit entirely within the Slug?
        >
        >
        >
        > Note I wanted both USB ports for iolan (not one for USB stick/drive
        >
        > holding OS).
        >
        >
        >
        > Mike Westerhof (mwester) wrote:
        >
        > >
        >
        > > DaylanDarby wrote:
        >
        > > > I'm looking to convert one of my slugs to a poor man's iolan (with 2
        >
        > > USB
        >
        > > > ports).
        >
        > > >
        >
        > > > I figure to do this I need 'screen' (or equivalent) and serial and
        >
        > > > network drivers - nothing else.
        >
        > > >
        >
        > > > Has anyone been able to embed a stripped down debian on the box itself
        >
        > > > (no external drives)?
        >
        > > >
        >
        > > > If so I'd like a pointer to your URL or information on how to do this.
        >
        > > >
        >
        > >
        >
        > > This is pretty much what SlugOS does. OpenWRT will also do the job.
        >
        > >
        >
        > > -Mike (mwester)
        >
        > >
        >
        > >
        >
        >
        >
        >
        >
        >
        >
        > ------------ --------- --------- ------
        >
        >
        >
        > Yahoo! Groups Links
        >
        >
        >
        >    http://groups. yahoo.com/ group/nslu2- linux/
        >
        >
        >
        >    Individual Email | Traditional
        >
        >
        >
        >    http://groups. yahoo.com/ group/nslu2- linux/join
        >
        >    (Yahoo! ID required)
        >
        >
        >
        >    nslu2-linux- digest@yahoogrou ps.com
        >
        >    nslu2-linux- fullfeatured@ yahoogroups. com
        >
        >
        >
        >    nslu2-linux- unsubscribe@ yahoogroups. com
        >
        >
        >
        >    http://docs. yahoo.com/ info/terms/
        >
      • DaylanDarby
        Exactly the use for which I wanted. One slug as terminal server for two SheevaPlugs. (I didn t even think to look on the plugcomputer site for a slug setup).
        Message 3 of 8 , Apr 21, 2010
          Exactly the use for which I wanted. One slug as terminal server for two
          SheevaPlugs.
          (I didn't even think to look on the plugcomputer site for a slug setup).

          Thanks
          Daylan

          CORNELIU DOBAN wrote:
          >
          >
          > I'm using SugOS on memstick (but I suppose it will fit in the 8MB
          > internal flash if desired) with "screen" and "picocom" to connect to a
          > SheevaPlug serial to usb adaptor.
          >
          > The installation steps are posted here:
          > http://plugcomputer.org/plugforum/index.php?topic=124.0
          >
          > Regards,
          > Corneliu
          >
          > --- On *Tue, 4/20/10, Mark Kelly /<mekelly5@...>/* wrote:
          >
          >
          > From: Mark Kelly <mekelly5@...>
          > Subject: Re: [nslu2-linux] Poor man's iolan?
          > To: nslu2-linux@yahoogroups.com
          > Received: Tuesday, April 20, 2010, 8:20 PM
          >
          >
          >
          > Openwrt will definitely work for what you are trying to do. It
          > will fit just fine in the on board memory. If by an iolan you are
          > simply trying to accomplish serial to ethernet conversion, then
          > simply install openwrt, and use the built in package manager to
          > install ser2net as was mentioned before and you will be able to
          > use both usb ports for usb to serial adapters. I've done this
          > many, many times and it works great. Only hiccup is making sure
          > you install the correct kernel models for your usb dongles, but
          > you can do that with the package manager also.
          >
          > On Tue, Apr 20, 2010 at 9:26 PM, DaylanDarby <DaylanDarby@
          > gmail.com </mc/compose?to=DaylanDarby@...>> wrote:
          >
          > Completely embedded? I thought that all but the original
          > linksys was too
          > big to fit entirely within the Slug?
          >
          > Note I wanted both USB ports for iolan (not one for USB
          > stick/drive
          > holding OS).
          >
          > Mike Westerhof (mwester) wrote:
          > >
          > > DaylanDarby wrote:
          > > > I'm looking to convert one of my slugs to a poor man's
          > iolan (with 2
          > > USB
          > > > ports).
          > > >
          > > > I figure to do this I need 'screen' (or equivalent) and
          > serial and
          > > > network drivers - nothing else.
          > > >
          > > > Has anyone been able to embed a stripped down debian on
          > the box itself
          > > > (no external drives)?
          > > >
          > > > If so I'd like a pointer to your URL or information on how
          > to do this.
          > > >
          > >
          > > This is pretty much what SlugOS does. OpenWRT will also do
          > the job.
          > >
          > > -Mike (mwester)
          > >
          > >
          >
          >
          >
          > ------------ --------- --------- ------
          >
          > Yahoo! Groups Links
          >
          >
          > (Yahoo! ID required)
          >
          > nslu2-linux- fullfeatured@ yahoogroups. com
          > </mc/compose?to=nslu2-linux-fullfeatured@yahoogroups.com>
          >
          >
          >
          >
          >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.