Re: [nslu2-linux] Configuring static ip on debian
- When you say "can't access" do you mean ping, ssh, or upslug2 (with
NSLU2 in upgrade mode)?
0) Purge 192.168.1.77 (and the NSLU2 Mac address from your DHCP server)
1) Turn off the NSLU2. If "ping 192.168.1.77" responds then another
machine on your network has that address. Change it's address or turn it
off for now.
2) Start the NSLU2 in upgrade mode
and try upslug2 to identify the machine [BUT DO NOT UPGRADE]. If you
can't identify the NSLU2 then you probably have a cabling or network issue.
3) Power cycle the NSLU2 (get out of upgrade mode). Attempt to ping the
NSLU2 with it's last known IP address.
That's all I know. Good luck.
> Hi, im triying to set up a static on my NSLU2 with debian, i have
> modified the interfaces file:
> # This file describes the network interfaces available on your system
> # and how to activate them. For more information, see interfaces(5).
> # The loopback network interface
> auto lo
> iface lo inet loopback
> # The primary network interface
> auto eth0
> iface eth0 inet static
> address 192.168.1.77
> netmask 255.255.255.0
> gateway 192.168.1.1
> nameserver 220.127.116.11 18.104.22.168
> but when i reboot the NSLU2 the eht0 interface don't start and i can't
> acces to nslu2 by network i don't hot i have to configure this for the
> eth0 start automatically because with dhcp it starts OK. Thanks