Loading ...
Sorry, an error occurred while loading the content.
 

Lenny installer problem

Expand Messages
  • guyug01
    Hi, After long experience with opendebianslug, tried to install lenny. All was working with debian installer since it could nt find any mirror. The specified
    Message 1 of 10 , Mar 5, 2009
      Hi,
      After long experience with opendebianslug, tried to install lenny.
      All was working with debian installer since it could'nt find any mirror.
      "The specified Debian archive mirror is either not available, or does not have a valid Release file on it. Please try a different mirror"

      My network goes fine. The slug is behind a router and a bridge. Must I put the gateway of the router and how ?
      The mirrors seem to be ok from my linux box.

      I do'nt see any error in the /var/log/syslog :
      Mar 5 20:31:03 main-menu[2517]: INFO: Menu item 'choose-mirror' selected
      Mar 5 20:31:12 choose-mirror[3065]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/lenny/Release -O - | grep ^Suite: | cut -d' ' -f 2
      Mar 5 20:31:13 choose-mirror[3065]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/stable/Release -O - | grep ^Suite: | cut -d' ' -f 2
      Mar 5 20:31:13 choose-mirror[3065]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/testing/Release -O - | grep ^Suite: | cut -d' ' -f 2
      Mar 5 20:31:13 choose-mirror[3065]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/unstable/Release -O - | grep ^Suite: | cut -d' ' -f 2

      Thanks for your help
      Guy
    • guyug01
      ... Sorry, I did nt see that : Mar 5 20:46:05 main-menu[2517]: DEBUG: resolver (libc6-udeb): package doesn t exist (ignored) Mar 5 20:46:05 main-menu[2517]:
      Message 2 of 10 , Mar 5, 2009
        > I do'nt see any error in the /var/log/syslog :

        Sorry, I did'nt see that :

        Mar 5 20:46:05 main-menu[2517]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
        Mar 5 20:46:05 main-menu[2517]: DEBUG: resolver (libc6): package doesn't exist (ignored)
        Mar 5 20:46:05 main-menu[2517]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
        Mar 5 20:46:05 main-menu[2517]: DEBUG: resolver (localechooser): package doesn't exist (ignored)

        Guy
      • Martin Michlmayr
        ... It s possible the network on the nslu2 is not configured properly. What does ip address ip route cat /etc/resolv.conf say in the installer (open a shell;
        Message 3 of 10 , Mar 5, 2009
          * guyug01 <guyug01@...> [2009-03-05 17:19]:
          > My network goes fine. The slug is behind a router and a bridge. Must I put the gateway of the router and how ?
          > The mirrors seem to be ok from my linux box.

          It's possible the network on the nslu2 is not configured properly.
          What does

          ip address
          ip route
          cat /etc/resolv.conf

          say in the installer (open a shell; it's the last-but-one entry in the
          menu) and does it look sane?

          --
          Martin Michlmayr
          http://www.cyrius.com/
        • guyug01
          More information if needed : ~ # cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them.
          Message 4 of 10 , Mar 5, 2009
            More information if needed :

            ~ # cat /etc/network/interfaces
            # This file describes the network interfaces available on your system
            # and how to activate them. For more information, see interfaces(5).

            # The loopback network interface
            auto lo
            iface lo inet loopback

            # The primary network interface
            allow-hotplug eth0
            iface eth0 inet static
            address 192.168.0.6
            netmask 255.255.255.0
            network 192.168.0.0
            broadcast 192.168.0.255
            gateway 192.168.0.254
            # dns-* options are implemented by the resolvconf package, if installed
            dns-nameservers 212.27.32.176 192.168.0.5
            dns-search example.org

            So, my gateway is present !
          • guyug01
            ~ # ip address 1: lo: mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0:
            Message 5 of 10 , Mar 5, 2009
              ~ # ip address
              1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
              link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
              inet 127.0.0.1/8 scope host lo
              2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 100
              link/ether 00:0f:66:7c:06:1d brd ff:ff:ff:ff:ff:ff
              inet 192.168.0.6/24 brd 192.168.0.255 scope global eth0


              ~ # ip route
              192.168.0.0/24 dev eth0 src 192.168.0.6
              default via 192.168.0.254 dev eth0


              > cat /etc/resolv.conf

              ~ # cat /etc/resolv.conf
              search example.org
              nameserver 212.27.32.176
              nameserver 192.168.0.5


              > say in the installer (open a shell; it's the last-but-one entry in the
              > menu) and does it look sane?

              It's look totally sane

              Guy
            • Martin Michlmayr
              ... OK, in that case, can you paste the full /var/log/syslog file? -- Martin Michlmayr http://www.cyrius.com/
              Message 6 of 10 , Mar 5, 2009
                * guyug01 <guyug01@...> [2009-03-05 18:33]:
                > > say in the installer (open a shell; it's the last-but-one entry in the
                > > menu) and does it look sane?
                >
                > It's look totally sane

                OK, in that case, can you paste the full /var/log/syslog file?
                --
                Martin Michlmayr
                http://www.cyrius.com/
              • guyug01
                ~ # cat /var/log/syslog Mar 5 21:27:37 syslogd started: BusyBox v1.10.2 Mar 5 21:27:37 kernel: klogd started: BusyBox v1.10.2 (Debian 1:1.10.2-2) Mar 5
                Message 7 of 10 , Mar 5, 2009
                  ~ # cat /var/log/syslog
                  Mar 5 21:27:37 syslogd started: BusyBox v1.10.2
                  Mar 5 21:27:37 kernel: klogd started: BusyBox v1.10.2 (Debian 1:1.10.2-2)
                  Mar 5 21:27:37 kernel: [ 0.000000] Initializing cgroup subsys cpu
                  Mar 5 21:27:37 kernel: [ 0.000000] Linux version 2.6.26-1-ixp4xx (Debian 2.6.26-13) (waldi@...) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 Sun Jan 11 06:56:23 UTC 2009
                  Mar 5 21:27:37 kernel: [ 0.000000] CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=0000397f
                  Mar 5 21:27:37 kernel: [ 0.000000] Machine: Linksys NSLU2
                  Mar 5 21:27:37 kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback
                  Mar 5 21:27:37 kernel: [ 0.000000] On node 0 totalpages: 8192
                  Mar 5 21:27:37 kernel: [ 0.000000] DMA zone: 64 pages used for memmap
                  Mar 5 21:27:37 kernel: [ 0.000000] DMA zone: 0 pages reserved
                  Mar 5 21:27:37 kernel: [ 0.000000] DMA zone: 8128 pages, LIFO batch:0
                  Mar 5 21:27:37 kernel: [ 0.000000] Normal zone: 0 pages used for memmap
                  Mar 5 21:27:37 kernel: [ 0.000000] Movable zone: 0 pages used for memmap
                  Mar 5 21:27:37 kernel: [ 0.000000] CPU0: D VIVT undefined 5 cache
                  Mar 5 21:27:37 kernel: [ 0.000000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
                  Mar 5 21:27:37 kernel: [ 0.000000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
                  Mar 5 21:27:37 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
                  Mar 5 21:27:37 kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 rtc-x1205.probe=0,0x6f noirqdebug
                  Mar 5 21:27:37 kernel: [ 0.000000] Unknown boot option `rtc-x1205.probe=0,0x6f': ignoring
                  Mar 5 21:27:37 kernel: [ 0.000000] IRQ lockup detection disabled
                  Mar 5 21:27:37 kernel: [ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
                  Mar 5 21:27:37 kernel: [42949372.960000] Console: colour dummy device 80x30
                  Mar 5 21:27:37 kernel: [42949372.960000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
                  Mar 5 21:27:37 kernel: [42949372.960000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
                  Mar 5 21:27:37 kernel: [42949372.960000] Memory: 32MB = 32MB total
                  Mar 5 21:27:37 kernel: [42949372.960000] Memory: 23256KB available (2636K code, 290K data, 116K init)
                  Mar 5 21:27:37 kernel: [42949372.960000] Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
                  Mar 5 21:27:37 kernel: [42949373.200000] Security Framework initialized
                  Mar 5 21:27:37 kernel: [42949373.200000] SELinux: Disabled at boot.
                  Mar 5 21:27:37 kernel: [42949373.200000] Capability LSM initialized
                  Mar 5 21:27:37 kernel: [42949373.200000] Mount-cache hash table entries: 512
                  Mar 5 21:27:37 kernel: [42949373.200000] Initializing cgroup subsys ns
                  Mar 5 21:27:37 kernel: [42949373.200000] Initializing cgroup subsys cpuacct
                  Mar 5 21:27:37 kernel: [42949373.200000] Initializing cgroup subsys devices
                  Mar 5 21:27:37 kernel: [42949373.200000] CPU: Testing write buffer coherency: ok
                  Mar 5 21:27:37 kernel: [42949373.200000] net_namespace: 652 bytes
                  Mar 5 21:27:37 kernel: [42949373.200000] NET: Registered protocol family 16
                  Mar 5 21:27:37 kernel: [42949373.210000] IXP4xx: Using 16MiB expansion bus window size
                  Mar 5 21:27:37 kernel: [42949373.210000] NSLU2: Using MAC address 00:0f:66:7c:06:1d for port 0
                  Mar 5 21:27:37 kernel: [42949373.210000] PCI: IXP4xx is host
                  Mar 5 21:27:37 kernel: [42949373.210000] PCI: IXP4xx Using direct access for memory space
                  Mar 5 21:27:37 kernel: [42949373.210000] PCI: bus0: Fast back to back transfers disabled
                  Mar 5 21:27:37 kernel: [42949373.210000] dmabounce: registered device 0000:00:01.0 on pci bus
                  Mar 5 21:27:37 kernel: [42949373.210000] dmabounce: registered device 0000:00:01.1 on pci bus
                  Mar 5 21:27:37 kernel: [42949373.210000] dmabounce: registered device 0000:00:01.2 on pci bus
                  Mar 5 21:27:37 kernel: [42949373.250000] NET: Registered protocol family 2
                  Mar 5 21:27:37 kernel: [42949373.260000] Switched to high resolution mode on CPU 0
                  Mar 5 21:27:37 kernel: [42949373.340000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
                  Mar 5 21:27:37 kernel: [42949373.340000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
                  Mar 5 21:27:37 kernel: [42949373.340000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
                  Mar 5 21:27:37 kernel: [42949373.340000] TCP: Hash tables configured (established 1024 bind 1024)
                  Mar 5 21:27:37 kernel: [42949373.340000] TCP reno registered
                  Mar 5 21:27:37 kernel: [42949373.370000] NET: Registered protocol family 1
                  Mar 5 21:27:37 kernel: [42949373.370000] checking if image is initramfs... it is
                  Mar 5 21:27:37 kernel: [42949378.360000] Freeing initrd memory: 6143K
                  Mar 5 21:27:37 kernel: [42949378.360000] NetWinder Floating Point Emulator V0.97 (double precision)
                  Mar 5 21:27:37 kernel: [42949378.360000] audit: initializing netlink socket (disabled)
                  Mar 5 21:27:37 kernel: [42949378.360000] type=2000 audit(5.400:1): initialized
                  Mar 5 21:27:37 kernel: [42949378.370000] VFS: Disk quotas dquot_6.5.1
                  Mar 5 21:27:37 kernel: [42949378.370000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
                  Mar 5 21:27:37 kernel: [42949378.370000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
                  Mar 5 21:27:37 kernel: [42949378.370000] msgmni has been set to 57
                  Mar 5 21:27:37 kernel: [42949378.370000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
                  Mar 5 21:27:37 kernel: [42949378.370000] io scheduler noop registered
                  Mar 5 21:27:37 kernel: [42949378.370000] io scheduler anticipatory registered
                  Mar 5 21:27:37 kernel: [42949378.370000] io scheduler deadline registered
                  Mar 5 21:27:37 kernel: [42949378.370000] io scheduler cfq registered (default)
                  Mar 5 21:27:37 kernel: [42949378.410000] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
                  Mar 5 21:27:37 kernel: [42949378.420000] serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
                  Mar 5 21:27:37 kernel: [42949378.420000] console [ttyS0] enabled
                  Mar 5 21:27:37 kernel: [42949378.760000] serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
                  Mar 5 21:27:37 kernel: [42949378.790000] brd: module loaded
                  Mar 5 21:27:37 kernel: [42949378.800000] IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
                  Mar 5 21:27:37 kernel: [42949378.810000] IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0
                  Mar 5 21:27:37 kernel: [42949378.810000] Intel/Sharp Extended Query Table at 0x0031
                  Mar 5 21:27:37 kernel: [42949378.810000] Using buffer write method
                  Mar 5 21:27:37 kernel: [42949378.820000] cfi_cmdset_0001: Erase suspend on write enabled
                  Mar 5 21:27:37 kernel: [42949378.820000] erase region 0: offset=0x0,size=0x20000,blocks=64
                  Mar 5 21:27:37 kernel: [42949378.820000] Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000
                  Mar 5 21:27:37 kernel: [42949378.920000] 6 RedBoot partitions found on MTD device IXP4XX-Flash.0
                  Mar 5 21:27:37 kernel: [42949378.930000] Creating 6 MTD partitions on "IXP4XX-Flash.0":
                  Mar 5 21:27:37 kernel: [42949378.940000] 0x00000000-0x00040000 : "RedBoot"
                  Mar 5 21:27:37 kernel: [42949378.940000] 0x00040000-0x00060000 : "SysConf"
                  Mar 5 21:27:37 kernel: [42949378.950000] 0x00060000-0x00080000 : "Loader"
                  Mar 5 21:27:37 kernel: [42949378.960000] 0x00080000-0x001e0000 : "Kernel"
                  Mar 5 21:27:37 kernel: [42949378.970000] 0x001e0000-0x007e0000 : "Ramdisk"
                  Mar 5 21:27:37 kernel: [42949378.980000] 0x007e0000-0x00800000 : "FIS directory"
                  Mar 5 21:27:37 kernel: [42949378.990000] mice: PS/2 mouse device common for all mice
                  Mar 5 21:27:37 kernel: [42949378.990000] i2c /dev entries driver
                  Mar 5 21:27:37 kernel: [42949379.010000] rtc-x1205 0-006f: chip found, driver version 1.0.8
                  Mar 5 21:27:37 kernel: [42949379.020000] rtc-x1205 0-006f: rtc core: registered rtc-x1205 as rtc0
                  Mar 5 21:27:37 kernel: [42949379.030000] i2c-gpio i2c-gpio.0: using pins 7 (SDA) and 6 (SCL)
                  Mar 5 21:27:37 kernel: [42949379.040000] IXP4xx Watchdog Timer: heartbeat 60 sec
                  Mar 5 21:27:37 kernel: [42949379.040000] Registered led device: nslu2:green:ready
                  Mar 5 21:27:37 kernel: [42949379.050000] Registered led device: nslu2:red:status
                  Mar 5 21:27:37 kernel: [42949379.060000] Registered led device: nslu2:green:disk-1
                  Mar 5 21:27:37 kernel: [42949379.060000] Registered led device: nslu2:green:disk-2
                  Mar 5 21:27:37 kernel: [42949379.070000] NET: Registered protocol family 26
                  Mar 5 21:27:37 kernel: [42949379.080000] TCP cubic registered
                  Mar 5 21:27:37 kernel: [42949379.080000] NET: Registered protocol family 17
                  Mar 5 21:27:37 kernel: [42949379.090000] XScale DSP coprocessor detected.
                  Mar 5 21:27:37 kernel: [42949379.090000] registered taskstats version 1
                  Mar 5 21:27:37 kernel: [42949379.100000] rtc-x1205 0-006f: setting system clock to 2009-03-05 21:27:31 UTC (1236288451)
                  Mar 5 21:27:37 kernel: [42949379.110000] Freeing init memory: 116K
                  Mar 5 21:27:37 kernel: [42949382.680000] usbcore: registered new interface driver usbfs
                  Mar 5 21:27:37 kernel: [42949382.690000] usbcore: registered new interface driver hub
                  Mar 5 21:27:37 kernel: [42949382.820000] IXP4xx Queue Manager initialized.
                  Mar 5 21:27:37 kernel: [42949382.880000] input: ixp4xx beeper as /class/input/input0
                  Mar 5 21:27:37 kernel: [42949382.980000] eth0: MII PHY 1 on NPE-B
                  Mar 5 21:27:37 kernel: [42949383.170000] usbcore: registered new device driver usb
                  Mar 5 21:27:37 kernel: [42949383.190000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
                  Mar 5 21:27:37 kernel: [42949383.190000] PCI: enabling device 0000:00:01.0 (0140 -> 0142)
                  Mar 5 21:27:37 kernel: [42949383.200000] ohci_hcd 0000:00:01.0: OHCI Host Controller
                  Mar 5 21:27:37 kernel: [42949383.210000] ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1
                  Mar 5 21:27:37 kernel: [42949383.210000] ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000
                  Mar 5 21:27:37 kernel: [42949383.310000] usb usb1: configuration #1 chosen from 1 choice
                  Mar 5 21:27:37 kernel: [42949383.310000] hub 1-0:1.0: USB hub found
                  Mar 5 21:27:37 kernel: [42949383.320000] hub 1-0:1.0: 3 ports detected
                  Mar 5 21:27:37 kernel: [42949383.430000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
                  Mar 5 21:27:37 kernel: [42949383.430000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
                  Mar 5 21:27:37 kernel: [42949383.440000] usb usb1: Product: OHCI Host Controller
                  Mar 5 21:27:37 kernel: [42949383.450000] usb usb1: Manufacturer: Linux 2.6.26-1-ixp4xx ohci_hcd
                  Mar 5 21:27:37 kernel: [42949383.450000] usb usb1: SerialNumber: 0000:00:01.0
                  Mar 5 21:27:37 kernel: [42949383.470000] PCI: enabling device 0000:00:01.1 (0140 -> 0142)
                  Mar 5 21:27:37 kernel: [42949383.470000] ohci_hcd 0000:00:01.1: OHCI Host Controller
                  Mar 5 21:27:37 kernel: [42949383.480000] ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2
                  Mar 5 21:27:37 kernel: [42949383.490000] ohci_h
                  Mar 5 21:27:37 kernel: cd 0000:00:01.1: irq 27, io mem 0x48001000
                  Mar 5 21:27:37 kernel: [42949383.590000] usb usb2: configuration #1 chosen from 1 choice
                  Mar 5 21:27:37 kernel: [42949383.590000] hub 2-0:1.0: USB hub found
                  Mar 5 21:27:37 kernel: [42949383.600000] hub 2-0:1.0: 2 ports detected
                  Mar 5 21:27:37 kernel: [42949383.710000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
                  Mar 5 21:27:37 kernel: [42949383.710000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
                  Mar 5 21:27:37 kernel: [42949383.720000] usb usb2: Product: OHCI Host Controller
                  Mar 5 21:27:37 kernel: [42949383.730000] usb usb2: Manufacturer: Linux 2.6.26-1-ixp4xx ohci_hcd
                  Mar 5 21:27:37 kernel: [42949383.730000] usb usb2: SerialNumber: 0000:00:01.1
                  Mar 5 21:27:37 kernel: [42949383.750000] PCI: enabling device 0000:00:01.2 (0140 -> 0142)
                  Mar 5 21:27:37 kernel: [42949383.760000] ehci_hcd 0000:00:01.2: EHCI Host Controller
                  Mar 5 21:27:37 kernel: [42949383.760000] ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 3
                  Mar 5 21:27:37 kernel: [42949383.800000] ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000
                  Mar 5 21:27:37 kernel: [42949383.800000] usb 1-1: new full speed USB device using ohci_hcd and address 2
                  Mar 5 21:27:37 kernel: [42949383.830000] ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
                  Mar 5 21:27:37 kernel: [42949383.830000] usb usb3: configuration #1 chosen from 1 choice
                  Mar 5 21:27:37 kernel: [42949383.840000] hub 3-0:1.0: USB hub found
                  Mar 5 21:27:37 kernel: [42949383.850000] hub 3-0:1.0: 5 ports detected
                  Mar 5 21:27:37 kernel: [42949383.910000] hub 1-0:1.0: unable to enumerate USB device on port 1
                  Mar 5 21:27:37 kernel: [42949383.960000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
                  Mar 5 21:27:37 kernel: [42949383.960000] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
                  Mar 5 21:27:37 kernel: [42949383.970000] usb usb3: Product: EHCI Host Controller
                  Mar 5 21:27:37 kernel: [42949383.980000] usb usb3: Manufacturer: Linux 2.6.26-1-ixp4xx ehci_hcd
                  Mar 5 21:27:37 kernel: [42949383.980000] usb usb3: SerialNumber: 0000:00:01.2
                  Mar 5 21:27:37 kernel: [42949384.350000] usb 3-1: new high speed USB device using ehci_hcd and address 2
                  Mar 5 21:27:37 kernel: [42949384.510000] usb 3-1: configuration #1 chosen from 1 choice
                  Mar 5 21:27:37 kernel: [42949384.520000] usb 3-1: New USB device found, idVendor=1058, idProduct=1100
                  Mar 5 21:27:37 kernel: [42949384.520000] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
                  Mar 5 21:27:37 kernel: [42949384.530000] usb 3-1: Product: My Book
                  Mar 5 21:27:37 kernel: [42949384.540000] usb 3-1: Manufacturer: Western Digital
                  Mar 5 21:27:37 kernel: [42949384.540000] usb 3-1: SerialNumber: 57442D574341533831313235363435
                  Mar 5 21:27:37 lowmem: Entering low memory mode
                  Mar 5 21:27:44 preseed: successfully loaded preseed file from file:///preseed.cfg
                  Mar 5 21:27:45 anna-install: Queueing udeb lowmem for later installation
                  Mar 5 21:27:45 frontend: Obsolete command TITLE Low memory called
                  Mar 5 21:27:46 anna-install: Queueing udeb partman-auto for later installation
                  Mar 5 21:27:46 anna-install: Queueing udeb partman-ext3 for later installation
                  Mar 5 21:27:47 anna-install: Queueing udeb usb-storage-modules-2.6.26-1-ixp4xx-di for later installation
                  Mar 5 21:27:47 init: init: starting pid 1368, tty '': '/sbin/reopen-console /sbin/debian-installer'
                  Mar 5 21:27:47 init: init: starting pid 1376, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog'
                  Mar 5 21:27:47 debconf: Setting debconf/language to en
                  Mar 5 21:27:48 main-menu[1387]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
                  Mar 5 21:27:48 main-menu[1387]: DEBUG: resolver (libc6): package doesn't exist (ignored)
                  Mar 5 21:27:48 main-menu[1387]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
                  Mar 5 21:27:48 main-menu[1387]: DEBUG: resolver (localechooser): package doesn't exist (ignored)
                  Mar 5 21:27:48 main-menu[1387]: INFO: Menu item 'kbd-chooser' selected
                  Mar 5 21:27:48 main-menu[1387]: INFO: Falling back to the package description for console-keymaps-at
                  Mar 5 21:27:48 main-menu[1387]: INFO: Falling back to the package description for console-keymaps-at
                  Mar 5 21:27:48 kbd-chooser[1412]: DEBUG: Mounting usbdevfs to look for kbd
                  Mar 5 21:27:48 kbd-chooser[1412]: DEBUG: Parsing /proc/bus/usb/devices
                  Mar 5 21:27:48 kbd-chooser[1412]: DEBUG: Adding generic entry for AT keymaps
                  Mar 5 21:27:48 kbd-chooser[1412]: INFO: keyboard type at: present: false
                  Mar 5 21:27:48 kbd-chooser[1412]: INFO: keyboard type at: present: unknown
                  Mar 5 21:27:48 kbd-chooser[1412]: INFO: Setting debian-installer/serial-console to true
                  Mar 5 21:27:48 kbd-chooser[1412]: INFO: Setting debian-installer/uml-console to false
                  Mar 5 21:27:48 kbd-chooser[1412]: INFO: kbd-chooser: arch no-keyboard selected
                  Mar 5 21:27:48 kbd-chooser[1412]: INFO: kbd-chooser: not setting keymap
                  Mar 5 21:27:48 main-menu[1387]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
                  Mar 5 21:27:48 main-menu[1387]: DEBUG: resolver (libc6): package doesn't exist (ignored)
                  Mar 5 21:27:48 main-menu[1387]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
                  Mar 5 21:27:48 main-menu[1387]: DEBUG: resolver (localechooser): package doesn't exist (ignored)
                  Mar 5 21:27:48 main-menu[1387]: INFO: Menu item 'ethdetect' selected
                  Mar 5 21:27:51 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
                  Mar 5 21:27:51 net/hw-detect.hotplug: Detected hotpluggable network interface lo
                  Mar 5 21:27:53 apt-install: Queueing package udev for later installation
                  Mar 5 21:27:54 apt-install: Queueing package usbutils for later installation
                  Mar 5 21:27:57 hw-detect: Missing modules 'usb-storage (USB storage)
                  Mar 5 21:27:58 check-missing-firmware: no missing firmware in /tmp/missing-firmware
                  Mar 5 21:28:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
                  Mar 5 21:28:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo
                  Mar 5 21:28:02 kernel: [42949409.820000] firmware: requesting NPE-B
                  Mar 5 21:28:02 kernel: [42949409.870000] NPE-B: firmware functionality 0x0, revision 0x2:1
                  Mar 5 21:28:02 kernel: [42949409.870000] eth0: link down
                  Mar 5 21:28:03 check-missing-firmware: no missing firmware in /tmp/missing-firmware
                  Mar 5 21:28:03 main-menu[1387]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
                  Mar 5 21:28:03 main-menu[1387]: DEBUG: resolver (libc6): package doesn't exist (ignored)
                  Mar 5 21:28:03 main-menu[1387]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
                  Mar 5 21:28:03 main-menu[1387]: DEBUG: resolver (localechooser): package doesn't exist (ignored)
                  Mar 5 21:28:03 main-menu[1387]: INFO: Menu item 'netcfg' selected
                  Mar 5 21:28:04 kernel: [42949411.650000] eth0: link down
                  Mar 5 21:28:04 netcfg[2422]: INFO: executing: ip addr add 192.168.0.6/24 broadcast 192.168.0.255 dev eth0
                  Mar 5 21:28:07 kernel: [42949414.650000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
                  Mar 5 21:28:14 netcfg[2422]: INFO: Detected eth0 as a hotpluggable device
                  Mar 5 21:28:14 main-menu[1387]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
                  Mar 5 21:28:14 main-menu[1387]: DEBUG: resolver (libc6): package doesn't exist (ignored)
                  Mar 5 21:28:14 main-menu[1387]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
                  Mar 5 21:28:14 main-menu[1387]: DEBUG: resolver (localechooser): package doesn't exist (ignored)
                  Mar 5 21:28:14 main-menu[1387]: INFO: Falling back to the package description for auto-install
                  Mar 5 21:28:14 main-menu[1387]: INFO: Menu item 'network-console' selected
                  Mar 5 21:28:52 sshd[2480]: Server listening on 0.0.0.0 port 22.
                  Mar 5 21:28:53 apt-install: Queueing package openssh-server for later installation
                  Mar 5 21:29:28 sshd[2500]: WARNING: /etc/ssh/moduli does not exist, using fixed modulus
                  Mar 5 21:29:29 sshd[2500]: Connection closed by 192.168.0.8
                  Mar 5 21:29:59 sshd[2503]: WARNING: /etc/ssh/moduli does not exist, using fixed modulus
                  Mar 5 21:30:05 sshd[2503]: Accepted password for installer from 192.168.0.8 port 38099 ssh2
                  Mar 5 21:30:05 sshd[2506]: lastlog_filetype: Couldn't stat /var/log/lastlog: No such file or directory
                  Mar 5 21:30:05 sshd[2506]: lastlog_openseek: /var/log/lastlog is not a file or directory!
                  Mar 5 21:30:05 sshd[2506]: lastlog_filetype: Couldn't stat /var/log/lastlog: No such file or directory
                  Mar 5 21:30:05 sshd[2506]: lastlog_openseek: /var/log/lastlog is not a file or directory!
                  Mar 5 21:30:06 debconf: Setting debconf/language to en
                  Mar 5 21:30:10 debconf: Setting debconf/language to en
                  Mar 5 21:30:10 main-menu[2515]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
                  Mar 5 21:30:10 main-menu[2515]: DEBUG: resolver (libc6): package doesn't exist (ignored)
                  Mar 5 21:30:10 main-menu[2515]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
                  Mar 5 21:30:10 main-menu[2515]: DEBUG: resolver (localechooser): package doesn't exist (ignored)
                  Mar 5 21:30:10 main-menu[2515]: INFO: Falling back to the package description for auto-install
                  Mar 5 21:30:10 main-menu[2515]: INFO: Falling back to the package description for ai-choosers
                  Mar 5 21:30:10 main-menu[2515]: INFO: Menu item 'choose-mirror' selected
                  Mar 5 21:30:11 anna-install: Queueing udeb apt-mirror-setup for later installation
                  Mar 5 21:30:35 choose-mirror[2554]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/lenny/Release -O - | grep ^Suite: | cut -d' ' -f 2
                  Mar 5 21:30:35 choose-mirror[2554]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/stable/Release -O - | grep ^Suite: | cut -d' ' -f 2
                  Mar 5 21:30:36 choose-mirror[2554]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/testing/Release -O - | grep ^Suite: | cut -d' ' -f 2
                  Mar 5 21:30:36 choose-mirror[2554]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/unstable/Release -O - | grep ^Suite: | cut -d' ' -f 2
                  Mar 5 21:30:39 main-menu[2515]: INFO: Menu item 'choose-mirror' succeeded but requested to be left unconfigured.
                  Mar 5 21:30:39 main-menu[2515]: INFO: Modifying debconf priority limit from 'high' to 'medium'
                  Mar 5 21:30:39 debconf: Setting debconf/priority to medium
                  Mar 5 21:30:39 main-menu[2515]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
                  Mar 5 21:30:39 main-menu[2515]: DEBUG: resolver (libc6): package doesn't exist (ignored)
                  Mar 5 21:30:39 main-menu[2515]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
                  Mar 5 21:30:39 main-menu[2515]: DEBUG: resolver (localechooser): package doesn't exist (ignored)
                  Mar 5 21:32:01 sshd[2589]: WARNING: /etc/ssh/moduli does not exist, using fixed modulus
                  Mar 5 21:32:09 sshd[2589]: Accepted password for installer from 192.168.0.8 port 38101 ssh2
                  Mar 5 21:32:09 sshd[2592]: lastlog_filetype: Couldn't stat /var/log/lastlog: No such file or directory
                  Mar 5 21:32:09 sshd[2592]: lastlog_openseek: /var/log/lastlog is not a file or directory!
                  Mar 5 21:32:09 sshd[2592]: lastlog_filetype: Couldn't stat /var/log/lastlog: No such file or directory
                  Mar 5 21:32:09 sshd[2592]: lastlog_openseek: /var/log/lastlog is not a file or directory!
                  Mar 5 21:32:10 debconf: Setting debconf/language to en
                  Mar 5 21:57:31 main-menu[2515]: INFO: Falling back to the package description for auto-install
                  Mar 5 21:57:31 main-menu[2515]: INFO: Falling back to the package description for ai-choosers
                  Mar 5 21:57:31 main-menu[2515]: INFO: Restoring default debconf priority 'high'
                  Mar 5 21:57:31 debconf: Setting debconf/priority to high
                  Mar 5 21:57:31 main-menu[2515]: INFO: Menu item 'choose-mirror' selected
                  Mar 5 21:57:35 choose-mirror[2636]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/lenny/Release -O - | grep ^Suite: | cut -d' ' -f 2
                  Mar 5 21:57:35 choose-mirror[2636]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/stable/Release -O - | grep ^Suite: | cut -d' ' -f 2
                  Mar 5 21:57:35 choose-mirror[2636]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/testing/Release -O - | grep ^Suite: | cut -d' ' -f 2
                  Mar 5 21:57:35 choose-mirror[2636]: DEBUG: command: wget -q http://ftp.fr.debian.org/debian//dists/unstable/Release -O - | grep ^Suite: | cut -d' ' -f 2
                  Mar 5 21:57:38 main-menu[2515]: INFO: Priority changed externally, setting main-menu default to 'high' (high)
                  Mar 5 21:57:38 main-menu[2515]: INFO: Menu item 'choose-mirror' succeeded but requested to be left unconfigured.
                  Mar 5 21:57:38 main-menu[2515]: INFO: Modifying debconf priority limit from 'high' to 'medium'
                  Mar 5 21:57:38 debconf: Setting debconf/priority to medium
                  Mar 5 21:57:38 main-menu[2515]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
                  Mar 5 21:57:38 main-menu[2515]: DEBUG: resolver (libc6): package doesn't exist (ignored)
                  Mar 5 21:57:38 main-menu[2515]: DEBUG: resolver (libgcc1): package doesn't exist (ignored)
                  Mar 5 21:57:38 main-menu[2515]: DEBUG: resolver (localechooser): package doesn't exist (ignored)
                • Martin Michlmayr
                  I m afraid I don t see anything obviously wrong. I suggest to open a shell and use wget to try downloading things. I still think something is wrong with
                  Message 8 of 10 , Mar 6, 2009
                    I'm afraid I don't see anything obviously wrong. I suggest to open a
                    shell and use 'wget' to try downloading things. I still think
                    something is wrong with the network config.

                    --
                    Martin Michlmayr
                    http://www.cyrius.com/
                  • guyug01
                    Hi Martin, The network connection works now fine ! Migrating from an Opendebianslug with fixed IP, gave me automatically (why ?) the same adress after flashing
                    Message 9 of 10 , Mar 6, 2009
                      Hi Martin,
                      The network connection works now fine !
                      Migrating from an Opendebianslug with fixed IP, gave me automatically (why ?) the same adress after flashing with upslug2.
                      After lot of tries, I can say that, with the installer, the network connection does'nt work with a fixed IP behind my router.
                      So, in a console a requested for a dhcp adress (dhclient eth0) and then
                      I could join the mirrors.
                      Thanks for your good job.
                      Guy
                    • guyug01
                      Hi Martin, My Lenny slug woks fine now as a multimedia server and PVR (pvrusb2). Thanks a lot for your tutorial Guy
                      Message 10 of 10 , Mar 6, 2009
                        Hi Martin,
                        My Lenny slug woks fine now as a multimedia server and PVR (pvrusb2).
                        Thanks a lot for your tutorial
                        Guy
                      Your message has been successfully submitted and would be delivered to recipients shortly.