Re: [nslu2-linux] debian 5.0beta2 image dose not boot
- For all how have the same problem. I flashed Unslung 6.10 Beta, set
there the static lan configuration and flashed 5.0 beta2 again. Now i
can connect to the box.
Steve Wagner schrieb:
> Rod Whitby schrieb:
>> Steve Wagner wrote:
>>> Martin Michlmayr schrieb:
>>>> * Steve Wagner <lists@...> [2008-08-02 19:16]:
>>>>> I have tryed both images ( arm and armel ) but its always the same. Now
>>>>> i flashed the lastest SlugOS image and it works like before.
>>>>> How can i get the debian 5.0beta2 to boot?
>>>> What network settings do you have?
>> > Static settings
>> > iface eth0 inet static
>> > address 192.168.33.5
>> > netmask 255.255.255.0
>> > gateway 192.168.33.33
>> > But i am not sure how to get them from the rom.
>> How did you set the network settings on the NSLU2 before you flashed the
>> Debian image?
> I think so because the plain SlugOS (without attached drives where ive
> installed Debian) uses the same network config.
> How can i get the network configuration which is stored in flash? I did
> not found this information at the moment.
>> Did you set a complete set of network settings (including
>> gateway and DNS) using the Linksys web interface?
> I dont know, it is a long time ago and ive used the web interface only
> to flash another image.
>> Were you running
>> Unslung or SlugOS previously?
> Ive use SlugOSLE-4.8-beta with kernel 22.214.171.124 #1 PREEMPT Mon Dec 24
> 17:32:03 UTC 2007 armv5tel GNU/Linux and a debian LE with bootstrap.
> Yahoo! Groups Links