Re: Samba file transfer creates zone identifier files...
- --- In email@example.com, "Brian Zhou" wrote:
> Thanks for the problem report and investigation.np
> Samba 3.2.1 has just been released and supposedly include this fix. Ithx for this. I was able to update my Slug with your update this
> upgraded optware samba package to 3.2.1 after testing that I can
> connect to a share on unslung. It probably would take a few hours
> before the new ipk reach the feed.
morning and everything looks fine, now.
thx & cheers
PS: the issue with SWAT persists: it still reports smbd and nmbd as
"not running" though it's properly listing the active connection &
shares and the open files.
- --- In firstname.lastname@example.org, "doll_oliver" wrote:
> [...] But my latest status is:I think I finally got SWAT working on the Unslung image, again:
> Either I upgrade to Samba 3.2 with or without using xinted
> making the changes mentioned above SWAT's status page lists
> smbd: not running
> nmbd: not running
> though samba is running and the pages lists open connections,
> shares and files. [...]
Beside the IP range of the local ethernet interface which needed to be
added to the smb.conf ("interfaces = <myEth-IP>, ipx0, lo") config I
also added 127.0.0.1/24.
Now, /opt/bin/nmblookup -A localhost.
Looking up status of 127.0.0.1
NLSU2 <00> - H <ACTIVE>
NSLU2 <03> - H <ACTIVE>
NSLU2 <20> - H <ACTIVE>
..__MSBROWSE__. <01> - <GROUP> H <ACTIVE>
MY_DOMAIN <1d> - H <ACTIVE>
MY_DOMAIN <1b> - H <ACTIVE>
MY_DOMAIN <1c> - <GROUP> H <ACTIVE>
MY_DOMAIN <1e> - <GROUP> H <ACTIVE>
MY_DOMAIN <00> - <GROUP> H <ACTIVE>
MAC Address = 00-00-00-00-00-00
works again. I guess the translation of "ipx0" and "lo" got broken on
Unslung for samba 3.2+!?
thx & cheers