On Mon, 2008-03-03 at 09:46 +0000, Gavin Lewandowski wrote:
> Hi All,
> After following the article at
> I have replaced my 1gig boot device with a 250gb Maxtor SATA drive.
> This has all gone well, however the Linksys web interface does not think
> a device is attached to DISK 2.
> /dev/sda1 241333620 597820 240735800 1% /
> /dev/sdb1 480482192 283435068 192165696 60% /share/hdd/data
> /dev/sdb2 116661 4144 111313 4% /share/hdd/conf
> As you can see the drive has mounted correctly.
Is the 250 GB disk a "native" formated disk or a full ext3 disk?
The linksys software does a lot of magic in mounting and sharing
the devices. But unfortunately this magic doesn't always work as
we want it to do.
Please have a look at:
I would format one disk native and one disk full ext3 and write
a script to do the setup for that disk:
An other solution is a FAT disk but there are other disadvantages
to that setup as well.