Loading ...
Sorry, an error occurred while loading the content.

Re: newbie needs help - please

Expand Messages
  • rolandkbs
    Check if your network setting on the PC is appropriate: the NSLU2 is per default on IP address 192.168.1.77. So your PC s IP-address and netmask have to be set
    Message 1 of 2 , Jan 27, 2008
    • 0 Attachment
      Check if your network setting on the PC is appropriate: the NSLU2 is
      per default on IP address 192.168.1.77. So your PC's IP-address and
      netmask have to be set correctly, e.g. IP-address in the range
      192.168.1.xxx and netmask 255.255.255.0.

      --- In nslu2-linux@yahoogroups.com, "Peter Tasker" <peter@...> wrote:
      >
      > Hi,
      >
      > I have hooked up my slug to the networks as per the linksys
      > instructions and all the LED's are showing all OK. I have run the set
      > up wizard, but it never finds the slug, I must be doing something
      > wrong!!! Any help would be appreciated,
      >
      > Thanks
      >
      > Peter
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.