Re: [nslu2-linux] PCB Size?
- At 03:46 PM 3/2/2007, lpcarmed wrote:
>I wonder if it fits - what's the size of the PCB?Including the connectors (which extend slightly from one
side), the PCB is 3.5"x4.5".
- Ok, you made me disassemble my testslug.
4.52 +- .02 inches by 3.35 +- .02 inches as best as my old eyes and my
ancient college architectural ruler can measure it.
(3.50 +- .04 inches if you include the protruding USB connectors)
Anyone with calipers care to measure more closely?
----- Original Message -----
From: "lpcarmed" <lpcarmed@...>
Sent: Friday, March 02, 2007 6:11 PM
Subject: [nslu2-linux] Re: PCB Size?
> By looking at a battery and measuring the pictures on the screen I
> guesstimated the PCB to be 4.2"x3", that would fit just right to the
> Bud Industries PN-1338-C box. Will post a pic when done.
> --- In email@example.com, Brian Wood <beww@...> wrote:
> > On Mar 2, 2007, at 1:46 PM, lpcarmed wrote:
> > > I'm going to order an NSLU2 and mount the PCB into a box like
> > > http://www.ourcoolhouse.com/WEL/WEL_in_box.jpg
> > > I wonder if it fits - what's the size of the PCB?
> > >
> > The outside of the unit is (according to spec) 5.31" x 3.78", the
> > board is slightly smaller than that.
> > You'll also need access to the USB, ethernet and power connectors,
> > and a way to get at the reset switch for easy flashing, though you
> > could of course remote all that stuff.
> > Shouldn't you figure out if it fits before stating that you are
> > to mount it in that box ? :-)
> > Nice box though.
> Yahoo! Groups Links