Loading ...
Sorry, an error occurred while loading the content.

Re: [nslu2-linux] A tip to those w/ WRT54GS

Expand Messages
  • Michael McTails
    Whoops, I forgot to include that is using OpenWRT, and not the stock firmware. The default configuration of dnsmasq in OpenWRT is the problem, and can be
    Message 1 of 2 , Sep 27, 2004
    • 0 Attachment
      Whoops, I forgot to include that is using OpenWRT, and not the stock
      firmware. The default configuration of dnsmasq in OpenWRT is the
      problem, and can be corrected w/ the steps below. Also, I'm not
      promising this will work for you, so YMMV.

      On Sep 27, 2004, at 5:05 PM, Michael McTails wrote:

      > I discovered that the NSLU will not take the IP address assigned from
      > dnsmasq if domain is set and it's invalid. To make this work, either
      > comment out the domain line, or set it correctly.
      > McTails
      >
      >
      >
      > [ Moderator Note: All static information is slowly moving to the Wiki
      > at http://www.nslu2-linux.org ]
      >
      >
      >
      >
      > Yahoo! Groups Sponsor
      >
      > ADVERTISEMENT
      > <lrec_companion_043004.gif>
      > <l.gif>
      >
      > Yahoo! Groups Links
      >
      > • To visit your group on the web, go to:
      > http://groups.yahoo.com/group/nslu2-linux/
      >  
      > • To unsubscribe from this group, send an email to:
      > nslu2-linux-unsubscribe@yahoogroups.com
      >  
      > • Your use of Yahoo! Groups is subject to the Yahoo! Terms of
      > Service.
      >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.