Loading ...
Sorry, an error occurred while loading the content.

Re: [nslu2-linux] Cannot talk to NSLU2 via web

Expand Messages
  • Marcel Nijenhof
    ... You could try to bind the mac address of your slug to a working ip address on your computor with: arp -s After that
    Message 1 of 2 , Sep 3, 2006
    • 0 Attachment
      On Sun, 2006-09-03 at 16:44 +0000, tperki wrote:

      > I have flashed the firmware with 2.3R63. No joy. I was able to Redboot
      > into the unit from my laptop using a crossover cable (so the hardware
      > is working) and cleared the sysconf area following instructions on the
      > NSLU wiki. Still no luck.

      You could try to bind the mac address of your slug to a working
      ip address on your computor with:
      arp -s <ip address slug> <Mac address slug>

      After that you can try to connect to the ip address.

      >
      > Is there any way to find out what address the NSLU might be
      > communicating on from Redboot, which seems to be the only way I can
      > talk to the unit.
      >

      Did you try to sniff the network on packages from the slug?

      --
      Marceln
    Your message has been successfully submitted and would be delivered to recipients shortly.