- Is it true that i can use the "manual reflash recovery procedure"
described in the page
to flash the openslug or debianslug image onto the NSLU's internal flash?
In other words, can I do this with exactly the same parameters :
ip_address -h 192.168.0.99
load -r -v -b 0x01000000 -h 192.168.0.99 openslug.bin
fis write -f 0x50060000 -b 0x01060000 -l 0x7a0000
I have done this successfully with unslug.bin image, but never tried
with openslug.bin or debianslug.bin.
I would like to be sure before doing it, because i do not want to
crash redboot, and be obliged to wire the jtag and buy a jtag probe.
Also, i know the normal procedure is to use sercomm utility, but i
don't want to solder the internal com port now at this point.