Loading ...
Sorry, an error occurred while loading the content.

23894recovering from bad flash

Expand Messages
  • opt12001
    Aug 1, 2009
    • 0 Attachment
      I tried to flash from Debian to openwrt and after the flash, the NLSU2 tried to boot (I saw on my DHCP server it retrieved an IP address but remained not pingable. After all led blinked one after the other, only the Ethernet LED remains lighted.

      Here was the flash sequence :
      $ sudo upslug2 -i openwrt-nslu2-squashfs.bin
      NSLU2 00:14:bf:63:46:30 Product ID: 1 Protocol ID: 0 Firmware Version: R23V63 [0x2363]
      Upgrading LKG634630 00:14:bf:63:46:30
      . original flash contents * packet timed out
      ! being erased - erased
      u being upgraded U upgraded
      v being verified V verified

      Display:
      <status> <address completed>+<bytes transmitted but not completed>
      Status:
      * timeout occured + sequence error detected

      7fffff+000000 ...VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
      Rebooting... done

      I then tried to flash again but here is what I got :

      $ upslug2 -i openwrt-nslu2-2.6-squashfs-r12674-glr.bin
      NSLU2 00:14:bf:63:46:30 Product ID: 1 Protocol ID: 0 Firmware Version: R23V63 [0x2363]
      Upgrading LKG634630 00:14:bf:63:46:30
      . original flash contents * packet timed out
      ! being erased - erased
      u being upgraded U upgraded
      v being verified V verified

      Display:
      <status> <address completed>+<bytes transmitted but not completed>
      Status:
      * timeout occured + sequence error detected

      0+0005bf ...u------------------------------------------------------------
      broadcast: flash programming error [std::exception]
      The NSLU2 reported an error reprogramming the flash, this is
      potentially a serious hardware problem, however it is probably
      worth while retrying the upgrade to see if the problem is
      temporary.

      The same if I try again

      Any idea to correct all this ?
      Thanks
    • Show all 3 messages in this topic