Loading ...
Sorry, an error occurred while loading the content.

print server on NSLU2

Expand Messages
  • Richard Bown
    Hi , after finding a problem in cups init file, cups is now starting and running , but hetting 404 error on both remote browser and elinks local in cupsd.conf
    Message 1 of 4 , Apr 16, 2013
    • 0 Attachment
      Hi ,
      after finding a problem in cups init file, cups is now starting and running , but hetting 404 error
      on both remote browser and elinks local
      in cupsd.conf i have it listening on 127.0.0.1
      and 192.168.101.0/24
      but in the logs I see
      I [17/May/1931:06:25:58 +0000] Full reload is required.
      I [17/May/1931:06:25:58 +0000] Loaded MIME database from "/opt/share/cups/mime" and "/opt/etc/cups": 36 types, 41 filters...
      I [17/May/1931:06:25:58 +0000] Loading job cache file "/opt/var/cache/cups/job.cache"...
      I [17/May/1931:06:25:58 +0000] Full reload complete.
      I [17/May/1931:06:25:58 +0000] Cleaning out old files in "/opt/var/spool/cups/tmp"...
      I [17/May/1931:06:25:58 +0000] Cleaning out old files in "/opt/var/cache/cups"...
      I [17/May/1931:06:25:58 +0000] Listening to 0.0.0.0:631 on fd 4...
      E [17/May/1931:06:25:58 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
      I [17/May/1931:06:25:58 +0000] Resuming new connection processing...
      I [17/May/1931:06:26:29 +0000] Saving printers.conf...

      whats fd 4 ????
      and why 0.0.0.0:631 ????
      TIA


      --
      --
      Best wishes / 73
      Richard Bown

      Email : richard@...
      HTTP :http://www.g8jvm.info
      nil carborundum a illegitemis
      ##################################################################################
      Ham Call G8JVM . OS Fedora FC18 x86_64 on a Dell Insiron N5030 laptop
      Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W ( degs+mins )
      QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 350W, 70cms 200W
      Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W
      ##################################################################################
      Please do not use the e-mail address of richard@...
      Mail hosted by 1and1, Domain screwed up by 1and1 and Freeparking
    • Mike Westerhof (mwester)
      ... Did you remember to put in the port number? e.g. http://192.168.101.xyz:631/ (where xyz is the last digits of the IP address assigned to your device, of
      Message 2 of 4 , Apr 16, 2013
      • 0 Attachment
        On 4/16/2013 3:38 PM, Richard Bown wrote:
        > Hi ,
        > after finding a problem in cups init file, cups is now starting and running , but hetting 404 error
        > on both remote browser and elinks local

        Did you remember to put in the port number? e.g.
        http://192.168.101.xyz:631/ (where xyz is the last digits of the IP
        address assigned to your device, of course)

        > in cupsd.conf i have it listening on 127.0.0.1
        > and 192.168.101.0/24
        > but in the logs I see
        > I [17/May/1931:06:25:58 +0000] Full reload is required.
        > I [17/May/1931:06:25:58 +0000] Loaded MIME database from "/opt/share/cups/mime" and "/opt/etc/cups": 36 types, 41 filters...
        > I [17/May/1931:06:25:58 +0000] Loading job cache file "/opt/var/cache/cups/job.cache"...
        > I [17/May/1931:06:25:58 +0000] Full reload complete.
        > I [17/May/1931:06:25:58 +0000] Cleaning out old files in "/opt/var/spool/cups/tmp"...
        > I [17/May/1931:06:25:58 +0000] Cleaning out old files in "/opt/var/cache/cups"...
        > I [17/May/1931:06:25:58 +0000] Listening to 0.0.0.0:631 on fd 4...
        > E [17/May/1931:06:25:58 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
        > I [17/May/1931:06:25:58 +0000] Resuming new connection processing...
        > I [17/May/1931:06:26:29 +0000] Saving printers.conf...
        >
        > whats fd 4 ????

        File Descriptor #4, I would imagine -- information that is only of
        interest to the application developer.

        > and why 0.0.0.0:631 ????

        Port 631 is the standard port used for web-based printing (like CUPS),
        and listening on IP address 0.0.0.0 means that the daemon is listening
        on any/all network interfaces for incoming IPV4 connection attempts.

        The next line would seem to indicate that it also attempted to listen
        for IPV6 connections, but the network port doesn't support those types
        of connections, so it went on without doing so.

        -Mike (mwester)
      • Richard Bown
        On Tue, 16 Apr 2013 16:28:52 -0500 ... Thanks for the reply Mike , yes definitely port 631, you wont get 404 errot I ve gone thru cupsd.conf again and here a
        Message 3 of 4 , Apr 16, 2013
        • 0 Attachment
          On Tue, 16 Apr 2013 16:28:52 -0500
          "Mike Westerhof (mwester)" <mwester@...> wrote:

          > On 4/16/2013 3:38 PM, Richard Bown wrote:
          > > Hi ,
          > > after finding a problem in cups init file, cups is now starting and running , but hetting 404
          > > error on both remote browser and elinks local
          >
          > Did you remember to put in the port number? e.g.
          > http://192.168.101.xyz:631/ (where xyz is the last digits of the IP
          > address assigned to your device, of course)
          >
          > > in cupsd.conf i have it listening on 127.0.0.1
          > > and 192.168.101.0/24
          > > but in the logs I see
          > > I [17/May/1931:06:25:58 +0000] Full reload is required.
          > > I [17/May/1931:06:25:58 +0000] Loaded MIME database from "/opt/share/cups/mime" and
          > > "/opt/etc/cups": 36 types, 41 filters... I [17/May/1931:06:25:58 +0000] Loading job cache file
          > > "/opt/var/cache/cups/job.cache"... I [17/May/1931:06:25:58 +0000] Full reload complete.
          > > I [17/May/1931:06:25:58 +0000] Cleaning out old files in "/opt/var/spool/cups/tmp"...
          > > I [17/May/1931:06:25:58 +0000] Cleaning out old files in "/opt/var/cache/cups"...
          > > I [17/May/1931:06:25:58 +0000] Listening to 0.0.0.0:631 on fd 4...
          > > E [17/May/1931:06:25:58 +0000] Unable to open listen socket for address :::631 - Address family
          > > not supported by protocol. I [17/May/1931:06:25:58 +0000] Resuming new connection processing...
          > > I [17/May/1931:06:26:29 +0000] Saving printers.conf...
          > >
          > > whats fd 4 ????
          >
          > File Descriptor #4, I would imagine -- information that is only of
          > interest to the application developer.
          >
          > > and why 0.0.0.0:631 ????
          >
          > Port 631 is the standard port used for web-based printing (like CUPS),
          > and listening on IP address 0.0.0.0 means that the daemon is listening
          > on any/all network interfaces for incoming IPV4 connection attempts.
          >
          > The next line would seem to indicate that it also attempted to listen
          > for IPV6 connections, but the network port doesn't support those types
          > of connections, so it went on without doing so.
          >
          > -Mike (mwester)

          Thanks for the reply Mike
          , yes definitely port 631, you wont get 404 errot
          I've gone thru cupsd.conf again and here a section of the log at max debug :-
          D [17/May/1931:07:13:40 +0000] cupsdSetBusyState: Not busy
          d [17/May/1931:07:13:40 +0000] cupsdRemoveSelect(fd=9)
          d [17/May/1931:07:13:40 +0000] cupsdAcceptClient(lis=0x2a073378(4)) Clients=0
          D [17/May/1931:07:13:40 +0000] cupsdAcceptClient: 9 from 192.168.101.4:631 (IPv4)
          d [17/May/1931:07:13:40 +0000] cupsdAddSelect(fd=9, read_cb=0x2a010114, write_cb=(nil),
          data=0x2a08c550) d [17/May/1931:07:13:40 +0000] cupsdReadClient(con=0x2a08c550(9))
          con->http.error=0 con->http.used=0, con->http.state=0 con->data_encoding=HTTP_ENCODE_LENGTH,
          con->data_remaining=0, con->file=-1 D [17/May/1931:07:13:40 +0000] cupsdReadClient: 9 GET /cups.css
          HTTP/1.1 D [17/May/1931:07:13:40 +0000] cupsdSetBusyState: Active clients d [17/May/1931:07:13:40
          +0000] cupsdFindBest: uri = "/cups.css"... d [17/May/1931:07:13:40 +0000] cupsdFindBest: Location
          CUPS_INTERNAL_BROWSE_ACL Limit 0 d [17/May/1931:07:13:40 +0000] cupsdFindBest: Location /printers
          Limit 7f d [17/May/1931:07:13:40 +0000] cupsdFindBest: Location /admin Limit 7f
          d [17/May/1931:07:13:40 +0000] cupsdFindBest: Location / Limit 7f
          d [17/May/1931:07:13:40 +0000] cupsdFindBest: best = /
          d [17/May/1931:07:13:40 +0000] cupsdAuthorize: con->uri="/cups.css", con->best=0x2a073650(/)
          d [17/May/1931:07:13:40 +0000] cupsdAuthorize: Authorization=""
          D [17/May/1931:07:13:40 +0000] cupsdAuthorize: No authentication data provided.
          d [17/May/1931:07:13:40 +0000] cupsdIsAuthorized: con->uri="/cups.css", con->best=0x2a073650(/)
          d [17/May/1931:07:13:40 +0000] cupsdIsAuthorized: level=CUPSD_AUTH_ANON, type=None,
          satisfy=CUPSD_AUTH_SATISFY_ALL, num_names=0 d [17/May/1931:07:13:40 +0000] cupsdIsAuthorized:
          auth=CUPSD_AUTH_ALLOW... d [17/May/1931:07:13:40 +0000] get_file(con=0x2a08c550(9),
          filestats=0xbed32190, filename=0xbed31d28, len=1024) = (null) d [17/May/1931:07:13:40 +0000]
          cupsdSendError(con=0x2a08c550(9), code=404, auth_type=0 D [17/May/1931:07:13:40 +0000]
          cupsdReadClient: 9 Closing because Keep-Alive disabled D [17/May/1931:07:13:40 +0000]
          cupsdCloseClient: 9 D [17/May/1931:07:13:40 +0000] cupsdSetBusyState: Not busy
          d [17/May/1931:07:13:40 +0000] cupsdRemoveSelect(fd=9)
          d [17/May/1931:07:13:41 +0000] select_timeout(0): 86400 seconds to do nothing

          Its not playing ball either on 127.0.0.1:631
          using elinks from the slug its self and as root there shouldn't be any permission problems
          locally it still give 404.

          here's my current cupsd.conf

          The first few lines are missing, but the essential stuff is near the end any way :-

          ServerCertificate /opt/etc/cups/ssl/server.crt

          #
          # ServerKey: the file to read containing the server's key.
          # Defaults to "/opt/etc/cups/ssl/server.key".
          #

          ServerKey /opt/etc/cups/ssl/server.key


          ########
          ######## Filter Options
          ########

          #
          # User/Group: the user and group the server runs under. Normally this
          # must be lp and sys, however you can configure things for another
          # user or group as needed.
          #
          # Note: the server must be run initially as root to support the
          # default IPP port of 631. It changes users whenever an external
          # program is run, or if the RunAsUser directive is specified...
          #

          #User lp
          #Group sys

          #
          # RIPCache: the amount of memory that each RIP should use to cache
          # bitmaps. The value can be any real number followed by "k" for
          # kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles
          # (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).
          #

          #RIPCache 8m

          #
          # TempDir: the directory to put temporary files in. This directory must be
          # writable by the user defined above! Defaults to "/opt/var/spool/cups/tmp" or
          # the value of the TMPDIR environment variable.
          #

          TempDir /opt/var/spool/cups/tmp

          #
          # FilterLimit: sets the maximum cost of all job filters that can be run
          # at the same time. A limit of 0 means no limit. A typical job may need
          # a filter limit of at least 200; limits less than the minimum required
          # by a job force a single job to be printed at any time.
          #
          # The default limit is 0 (unlimited).
          #

          FilterLimit 0

          ########
          ######## Network Options
          ########

          #
          # Ports/addresses that we listen to. The default port 631 is reserved
          # for the Internet Printing Protocol (IPP) and is what we use here.
          #
          # You can have multiple Port/Listen lines to listen to more than one
          # port or address, or to restrict access:
          #
          # Port 80
          # Port 631
          # Listen hostname
          # Listen hostname:80
          # Listen hostname:631
          # Listen 1.2.3.4
          # Listen 1.2.3.4:631
          #
          # NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades
          # for encryption. If you want to support web-based encryption you'll
          # probably need to listen on port 443 (the "https" port...)
          #
          # NOTE 2: In order for the command-line and web interfaces to work, you
          # must have at least one Port or Listen line that allows access from the
          # local loopback address (localhost).
          #

          #Port 80
          #Port 443
          Port 631

          #
          # HostNameLookups: whether or not to do lookups on IP addresses to get a
          # fully-qualified hostname. This defaults to Off for performance reasons...
          #

          #HostNameLookups On

          #
          # KeepAlive: whether or not to support the Keep-Alive connection
          # option. Default is on.
          #

          KeepAlive On

          #
          # KeepAliveTimeout: the timeout before Keep-Alive connections are
          # automatically closed. Default is 60 seconds.
          #

          KeepAliveTimeout 60

          #
          # MaxClients: controls the maximum number of simultaneous clients that
          # will be handled. Defaults to 100.
          #

          #MaxClients 100

          #
          # MaxClientsPerHost: controls the maximum number of simultaneous clients that
          # will be handled from a specific host. Defaults to 10 or 1/10th of the
          # MaxClients setting, whichever is larger. A value of 0 specifies the
          # automatic (10 or 1/10th) setting.
          #

          #MaxClientsPerHost 0

          #
          # MaxRequestSize: controls the maximum size of HTTP requests and print files.
          # Set to 0 to disable this feature (defaults to 0.)
          #

          #MaxRequestSize 0

          #
          # Timeout: the timeout before requests time out. Default is 300 seconds.
          #

          #Timeout 300


          ########
          ######## Browsing Options
          ########

          #
          # Browsing: whether or not to broadcast and/or listen for CUPS printer
          # information on the network. Enabled by default.
          #

          Browsing On

          #
          # BrowseProtocols: which protocols to use for browsing. Can be
          # any of the following separated by whitespace and/or commas:
          #
          # all - Use all supported protocols.
          # cups - Use the CUPS browse protocol.
          # slp - Use the SLPv2 protocol.
          #
          # The default is "cups".
          #
          # NOTE: If you choose to use SLPv2, it is *strongly* recommended that
          # you have at least one SLP Directory Agent (DA) on your
          # network. Otherwise, browse updates can take several seconds,
          # during which the scheduler will not respond to client
          # requests.
          #

          BrowseProtocols cups

          #
          # BrowseAddress: specifies a broadcast address to be used. By
          # default browsing information is not sent!
          #
          # Note: HP-UX does not properly handle broadcast unless you have a
          # Class A, B, C, or D netmask (i.e. no CIDR support).
          #
          # Note: Using the "global" broadcast address (255.255.255.255) will
          # activate a Linux demand-dial link with the default configuration.
          # If you have a LAN as well as the dial-up link, use the LAN's
          # broadcast address.
          #
          # The @LOCAL address broadcasts to all non point-to-point interfaces.
          # For example, if you have a LAN and a dial-up link, @LOCAL would
          # send printer updates to the LAN but not to the dial-up link.
          # Similarly, the @IF(name) address sends to the named network
          # interface, e.g. @IF(eth0) under Linux. Interfaces are refreshed
          # automatically (no more than once every 60 seconds), so they can
          # be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.
          #

          #BrowseAddress x.y.z.255
          #BrowseAddress x.y.255.255
          #BrowseAddress x.255.255.255
          #BrowseAddress 255.255.255.255
          BrowseAddress @LOCAL
          #BrowseAddress @IF(name)

          #
          # BrowseShortNames: whether or not to use "short" names for remote printers
          # when possible (e.g. "printer" instead of "printer@host".) Enabled by
          # default.
          #

          #BrowseShortNames Yes

          #
          # BrowseAllow: specifies an address mask to allow for incoming browser
          # packets. The default is to allow packets from all addresses.
          #
          # BrowseDeny: specifies an address mask to deny for incoming browser
          # packets. The default is to deny packets from no addresses.
          #
          # Both "BrowseAllow" and "BrowseDeny" accept the following notations for
          # addresses:
          #
          # All
          # None
          # *.domain.com
          # .domain.com
          # host.domain.com
          # nnn.*
          # nnn.nnn.*
          # nnn.nnn.nnn.*
          # nnn.nnn.nnn.nnn
          # nnn.nnn.nnn.nnn/mm
          # nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
          @LOCAL
          # @IF(name)
          #
          # The hostname/domainname restrictions only work if you have turned hostname
          # lookups on!
          #

          BrowseAllow address
          #BrowseDeny address

          #
          # BrowseInterval: the time between browsing updates in seconds. Default
          # is 30 seconds.
          #
          # Note that browsing information is sent whenever a printer's state changes
          # as well, so this represents the maximum time between updates.
          #
          # Set this to 0 to disable outgoing broadcasts so your local printers are
          # not advertised but you can still see printers on other hosts.
          #

          #BrowseInterval 30

          #
          # BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.
          #

          #BrowseOrder allow,deny
          BrowseOrder deny,allow

          #
          # BrowsePoll: poll the named server(s) for printers
          #

          #BrowsePoll address:port

          #
          # BrowsePort: the port used for UDP broadcasts. By default this is
          # the IPP port; if you change this you need to do it on all servers.
          # Only one BrowsePort is recognized.
          #

          BrowsePort 631

          #
          # BrowseRelay: relay browser packets from one address/network to another.
          #

          #BrowseRelay source-address destination-address
          #BrowseRelay @IF(src) @IF(dst)

          #
          # BrowseTimeout: the timeout for network printers - if we don't
          # get an update within this time the printer will be removed
          # from the printer list. This number definitely should not be
          # less the BrowseInterval value for obvious reasons. Defaults
          # to 300 seconds.
          #

          #BrowseTimeout 300

          #
          # ImplicitClasses: whether or not to use implicit classes.
          #
          # Printer classes can be specified explicitly in the classes.conf
          # file, implicitly based upon the printers available on the LAN, or
          # both.
          #
          # When ImplicitClasses is On, printers on the LAN with the same name
          # (e.g. Acme-LaserPrint-1000) will be put into a class with the same
          # name. This allows you to setup multiple redundant queues on a LAN
          # without a lot of administrative difficulties. If a user sends a
          # job to Acme-LaserPrint-1000, the job will go to the first available
          # queue.
          #
          # Enabled by default.
          #

          #ImplicitClasses On

          #
          # ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit
          # classes.
          #
          # When ImplicitAnyClasses is On and a local queue of the same name
          # exists, e.g. "printer", "printer@server1", "printer@server1", then
          # an implicit class called "Anyprinter" is created instead.
          #
          # When ImplicitAnyClasses is Off, implicit classes are not created
          # when there is a local queue of the same name.
          #
          # Disabled by default.
          #

          #ImplicitAnyCLasses Off

          #
          # HideImplicitMembers: whether or not to show the members of an
          # implicit class.
          #
          # When HideImplicitMembers is On, any remote printers that are
          # part of an implicit class are hidden from the user, who will
          # then only see a single queue even though many queues will be
          # supporting the implicit class.
          #
          # Enabled by default.
          #

          #HideImplicitMembers On


          ########
          ######## Security Options
          ########

          #
          # SystemGroup: the group name for "System" (printer administration)
          # access. The default varies depending on the operating system, but
          # will be "sys", "system", or "root" (checked for in that order.)
          #

          #SystemGroup sys

          #
          # RootCertDuration: How frequently the root certificate is regenerated.
          # Defaults to 300 seconds.
          #

          #RootCertDuration 300

          #
          # Access permissions for each directory served by the scheduler.
          # Locations are relative to DocumentRoot...
          #
          # AuthType: the authorization to use:
          #
          # None - Perform no authentication
          # Basic - Perform authentication using the HTTP Basic method.
          # Digest - Perform authentication using the HTTP Digest method.
          #
          # (Note: local certificate authentication can be substituted by
          # the client for Basic or Digest when connecting to the
          # localhost interface)
          #
          # AuthClass: the authorization class; currently only "Anonymous", "User",
          # "System" (valid user belonging to group SystemGroup), and "Group"
          # (valid user belonging to the specified group) are supported.
          #
          # AuthGroupName: the group name for "Group" authorization.
          #
          # Order: the order of Allow/Deny processing.
          #
          # Allow: allows access from the specified hostname, domain, IP address,
          # network, or interface.
          #
          # Deny: denies access from the specified hostname, domain, IP address,
          # network, or interface.
          #
          # Both "Allow" and "Deny" accept the following notations for addresses:
          #
          # All
          # None
          # *.domain.com
          # .domain.com
          # host.domain.com
          # nnn.*
          # nnn.nnn.*
          # nnn.nnn.nnn.*
          # nnn.nnn.nnn.nnn
          # nnn.nnn.nnn.nnn/mm
          # nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
          @LOCAL
          # @IF(name)
          #
          # The host and domain address require that you enable hostname lookups
          # with "HostNameLookups On" above.
          #
          # The @LOCAL address allows or denies from all non point-to-point
          # interfaces. For example, if you have a LAN and a dial-up link,
          # @LOCAL could allow connections from the LAN but not from the dial-up
          # link. Similarly, the @IF(name) address allows or denies from the
          # named network interface, e.g. @IF(eth0) under Linux. Interfaces are
          # refreshed automatically (no more than once every 60 seconds), so
          # they can be used on dynamically-configured interfaces, e.g. PPP,
          # 802.11, etc.
          #
          # Encryption: whether or not to use encryption; this depends on having
          # the OpenSSL library linked into the CUPS library and scheduler.
          #
          # Possible values:
          #
          # Always - Always use encryption (SSL)
          # Never - Never use encryption
          # Required - Use TLS encryption upgrade
          # IfRequested - Use encryption if the server requests it
          #
          # The default value is "IfRequested".
          #

          <Location />
          Order Deny,Allow
          Deny From All
          Allow From 127.0.0.1
          Allow From 192.168.101.0/24
          </Location>

          #<Location /classes>
          #
          # You may wish to limit access to printers and classes, either with Allow
          # and Deny lines, or by requiring a username and password.
          #
          #</Location>

          #<Location /classes/name>
          #
          # You may wish to limit access to printers and classes, either with Allow
          # and Deny lines, or by requiring a username and password.
          #
          #</Location>

          #<Location /jobs>
          #
          # You may wish to limit access to job operations, either with Allow
          # and Deny lines, or by requiring a username and password.
          #
          #</Location>

          <Location /printers>
          #
          # You may wish to limit access to printers and classes, either with Allow
          # and Deny lines, or by requiring a username and password.
          #
          AuthType None
          Order Deny,Allow
          Deny From None
          Allow From All
          </Location>

          #<Location /printers/name>
          #
          # You may wish to limit access to printers and classes, either with Allow
          # and Deny lines, or by requiring a username and password.
          #

          ## Anonymous access (default)
          #AuthType None

          ## Require a username and password (Basic authentication)
          #AuthType Basic
          #AuthClass User

          ## Require a username and password (Digest/MD5 authentication)
          #AuthType Digest
          #AuthClass User

          ## Restrict access to local domain
          #Order Deny,Allow
          #Deny From All
          #Allow From .mydomain.com
          #</Location>

          <Location /admin>
          #
          # You definitely will want to limit access to the administration functions.
          # The default configuration requires a local connection from a user who
          # is a member of the system group to do any admin tasks. You can change
          # the group name using the SystemGroup directive.
          #

          AuthType Basic
          AuthClass System

          ## Restrict access to local domain
          Order Deny,Allow
          Deny From All
          Allow From 127.0.0.1
          Allow From 192.168.101.0/24

          #Encryption Required
          </Location>

          #
          # End of "$Id: cupsd.conf 1016 2005-02-03 17:29:32Z ingeba $".
          #




          --
          --
          Best wishes / 73
          Richard Bown

          Email : richard@...
          HTTP :http://www.g8jvm.info
          nil carborundum a illegitemis
          ##################################################################################
          Ham Call G8JVM . OS Fedora FC18 x86_64 on a Dell Insiron N5030 laptop
          Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W ( degs+mins )
          QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 350W, 70cms 200W
          Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W
          ##################################################################################
          Please do not use the e-mail address of richard@...
          Mail hosted by 1and1, Domain screwed up by 1and1 and Freeparking
        • Richard Bown
          Hi all I ve found that at least 80% of the problems I had have been from memory sticks, I ve now throw 3 away, even gparted runs properly on the remaining one.
          Message 4 of 4 , Apr 17, 2013
          • 0 Attachment
            Hi all
            I've found that at least 80% of the problems I had have been from memory sticks, I've now throw 3
            away, even gparted runs properly on the remaining one. Deb Squeeze has loaded on OK, whether it
            runs as a print server has yet to be seen.

            --
            --
            Best wishes / 73
            Richard Bown

            Email : richard@...
            HTTP :http://www.g8jvm.info
            nil carborundum a illegitemis
            ##################################################################################
            Ham Call G8JVM . OS Fedora FC18 x86_64 on a Dell Insiron N5030 laptop
            Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W ( degs+mins )
            QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 350W, 70cms 200W
            Microwave 23 cms 140W, 13 cms 100W, 6 cms 0W & 3cms 5W
            ##################################################################################
            Please do not use the e-mail address of richard@...
            Mail hosted by 1and1, Domain screwed up by 1and1 and Freeparking
          Your message has been successfully submitted and would be delivered to recipients shortly.