Loading ...
Sorry, an error occurred while loading the content.

UNSLUG2 fail to boot

Expand Messages
  • jean-christophe maquet
    My unslug2 doesn t boot the led status is green but blinking I have added a serial port, see the log +Ethernet eth0: MAC address 00:1d:7e:ad:3d:2e IP:
    Message 1 of 1 , May 6, 2012
    • 0 Attachment
      My unslug2 doesn't boot
      the led status is green but blinking
      I have added a serial port, see the log
      +Ethernet eth0: MAC address 00:1d:7e:ad:3d:2e
      IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
      Default server: 0.0.0.0, DNS server IP: 0.0.0.0

      RedBoot(tm) bootstrap and debug environment [ROMRAM]
      Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004

      Platform: IXDP425 Development Platform (XScale)
      Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

      RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available
      FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
      == Executing boot script in 2.000 seconds - enter ^C to abort
      RedBoot> boot;exec 0x01d00000
      have eRcOmM copy kernel code from flash to RAM
      copy ramdisk file from flash to RAM
      run kernel Using base address 0x01d00000 and length 0x000d39c8
      Uncompressing
      Linux........................................................... done,
      booting the kernel.

      Linux version 2.4.22-xfs (root@sure_linux) (gcc version 3.2.1) #377 Fri Jul
      2 09:02:32 CST 2004
      CPU: XScale-IXP425/IXC1100 revision 2
      Machine: Intel IXDP425 Development Platform
      Warning: bad configuration page, trying to continue
      Security risk: creating user accessible mapping for 0x60000000 at
      0xff00f000
      Security risk: creating user accessible mapping for 0x51000000 at
      0xf1000000
      On node 0 totalpages: 8192
      zone(0): 8192 pages.
      zone(1): 0 pages.
      zone(2): 0 pages.
      Kernel command line: console=ttyS0,115200 root=/dev/ram0
      initrd=0x01000000,10M mem=32M@0x00000000
      Calibrating delay loop... 263.78 BogoMIPS
      Memory: 32MB = 32MB total
      Memory: 20204KB available (1454K code, 244K data, 236K init)
      Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
      Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
      Mount cache hash table entries: 512 (order: 0, 4096 bytes)
      Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
      Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
      POSIX conformance testing by UNIFIX
      PCI Autoconfig: Found Bus 0, Device 1, Function 0
      PCI Autoconfig: BAR 0, Mem, size=0x81000, address=0x4bf7f000
      PCI Autoconfig: Found Bus 0, Device 1, Function 1
      PCI Autoconfig: BAR 0, Mem, size=0x81000, address=0x4be7e000
      PCI Autoconfig: Found Bus 0, Device 1, Function 2
      PCI Autoconfig: BAR 0, Mem, size=0x80100, address=0x4bd7df00
      PCI: bus0: Fast back to back transfers disabled
      Linux NET4.0 for Linux 2.4
      Based upon Swansea University Computer Society NET3.039
      Initializing RT netlink socket
      Starting kswapd
      VFS: Disk quotas vdquot_6.5.1
      Journalled Block Device driver loaded
      i2c-core.o: i2c core module
      i2c-dev.o: i2c /dev entries driver module
      i2c-core.o: driver i2c-dev dummy driver registered.
      i2c-algo-bit.o: i2c bit algorithm module version 2.6.1 (20010830)
      pty: 256 Unix98 ptys configured
      Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
      SERIAL_PCI enabled
      ttyS00 at 0xff000003 (irq = 15) is a XScale UART
      ttyS01 at 0xff001003 (irq = 13) is a XScale UART
      RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
      SCSI subsystem driver Revision: 1.00
      * host:<NULL>
      cfi_cmdset_0001: Erase suspend on write enabled
      Using buffer write method
      Using static MTD partitions.
      Creating 4 MTD partitions on "IXP425 Flash":
      0x00000000-0x00040000 : "RedBoot "
      0x00040000-0x00060000 : "System Configuration"
      0x00060000-0x00160000 : "Kernel"
      0x00160000-0x00800000 : "Ramdisk"
      usb.c: registered new driver hub
      pci probe begin
      ehci_hcd 00:01.2: NEC Corporation USB 2.0
      ehci_hcd 00:01.2: irq 28, pci mem c3801f00
      usb.c: new USB bus registered, assigned bus number 1
      !!!abort_handler addr = 0xbe575f78, isr = 0x7, status = 0xb3a0
      !!!abort_handler addr = 0xbe575f78, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xbe575f78, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f05, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f05, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f05, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f05, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0
      !!!abort_handler addr = 0xc3801f01, isr = 0x7, status = 0x22a0

      and so on

      I have this device since few year but never used
      I have maybe flash it but I not sure anymore


      [Non-text portions of this message have been removed]
    Your message has been successfully submitted and would be delivered to recipients shortly.