It was the power supply indeed. Thanks a lot!
On Sun, May 15, 2011 at 9:30 PM, Mai Kee Reis
> It is the Power Supply Unit.
> Believe us. It is.
> Get any new one, 5V=, 2+A is okay.
> If the plug does not fit, cut a piece of the old cable off and attach it
> (with soldering iron) to the new PSU. But beware +/- orientation (best
> to use a voltmeter on the old plug before cutting the old cable)
> Mai K.
>> 1. NSLU2 turning itself off right after I turn it on
>> Posted by: "salvatore.iovene" salvatore@... salvatore.iovene
>> Date: Sat May 14, 2011 8:09 am ((PDT))
>> I'm suddenly having trouble with my NSLU2 running Unslung 6.10.
>> When the Ethernet cable or a USB device are connected, as soon as I turn it on, it will go off right away. That is, after half a second or so, the Ready/Status light will switch from orange to off.
>> If nothing is connected, the NSLU2 will stay on for about 10 seconds, then the same will happen again.