Loading ...
Sorry, an error occurred while loading the content.

Re: how to get /dev/ttyUSB0 on SlugOS5.3 beta

Expand Messages
  • beerman_wendel
    Yes, it is connected. Rigas
    Message 1 of 5 , Dec 17, 2010
    • 0 Attachment
      Yes, it is connected.

      Rigas

      --- In nslu2-general@yahoogroups.com, Carl Lowenstein <clowenstein@...> wrote:
      >
      > On Fri, Dec 17, 2010 at 11:32 AM, beerman_wendel
      > <beerman_wendel@...> wrote:
      > >
      > >
      > >
      > > Hello,
      > >
      > > I got an arduino microcontroller which I want to use to control my slug with.
      > >
      > > I installed
      > >
      > > kernel-module-usbserial
      > > kernel-module-ftdi-sio
      > >
      > > But no /dev/ttyUSB0 shows up.
      > >
      > > What did I miss?
      >
      > Simple question: is the USB device connected?
      >
      > carl
      > --
      > carl lowenstein  <clowenstein@...>
      >
    • reuter.rudolf
      Hello Rigas, I have written a setup documentation for an USB-RS232 interface: http://www.rudiswiki.de/wiki/NSLU2SlugOS48 Hopefully it will help you. Regards,
      Message 2 of 5 , Dec 18, 2010
      • 0 Attachment
        Hello Rigas,

        I have written a setup documentation for an USB-RS232 interface:
        http://www.rudiswiki.de/wiki/NSLU2SlugOS48

        Hopefully it will help you.
        Regards, Rudolf

        --- In nslu2-general@yahoogroups.com, "beerman_wendel" <beerman_wendel@...> wrote:
        >
        > Yes, it is connected.
        >
        > Rigas
        >
        > --- In nslu2-general@yahoogroups.com, Carl Lowenstein <clowenstein@> wrote:
        > >
        > > On Fri, Dec 17, 2010 at 11:32 AM, beerman_wendel
        > > <beerman_wendel@> wrote:
        > > >
        > > >
        > > >
        > > > Hello,
        > > >
        > > > I got an arduino microcontroller which I want to use to control my slug with.
        > > >
        > > > I installed
        > > >
        > > > kernel-module-usbserial
        > > > kernel-module-ftdi-sio
        > > >
        > > > But no /dev/ttyUSB0 shows up.
        > > >
        > > > What did I miss?
        > >
        > > Simple question: is the USB device connected?
        > >
        > > carl
        > > --
        > > carl lowenstein  <clowenstein@>
        > >
        >
      • beerman_wendel
        ... Hello Carl, thanks for your answer. Sorry I did not respond but in the meantime I found a different solution. My serial interface, that is soldered onto
        Message 3 of 5 , Jan 8, 2011
        • 0 Attachment
          --- In nslu2-general@yahoogroups.com, "reuter.rudolf" <reuterru@...> wrote:
          >
          >
          >
          > Hello Rigas,
          >
          > I have written a setup documentation for an USB-RS232 interface:
          > http://www.rudiswiki.de/wiki/NSLU2SlugOS48
          >
          > Hopefully it will help you.
          > Regards, Rudolf
          >
          > --- In nslu2-general@yahoogroups.com, "beerman_wendel" <beerman_wendel@> wrote:
          > >
          > > Yes, it is connected.
          > >
          > > Rigas
          > >
          > > --- In nslu2-general@yahoogroups.com, Carl Lowenstein <clowenstein@> wrote:
          > > >
          > > > On Fri, Dec 17, 2010 at 11:32 AM, beerman_wendel
          > > > <beerman_wendel@> wrote:
          > > > >
          > > > >
          > > > >
          > > > > Hello,
          > > > >
          > > > > I got an arduino microcontroller which I want to use to control my slug with.
          > > > >
          > > > > I installed
          > > > >
          > > > > kernel-module-usbserial
          > > > > kernel-module-ftdi-sio
          > > > >
          > > > > But no /dev/ttyUSB0 shows up.
          > > > >
          > > > > What did I miss?
          > > >
          > > > Simple question: is the USB device connected?
          > > >
          > > > carl
          > > > --
          > > > carl lowenstein  <clowenstein@>
          > > >
          > >
          >

          Hello Carl,

          thanks for your answer.
          Sorry I did not respond but in the meantime I found a different solution.
          My serial interface, that is soldered onto the slug's motherboard, finally works and so I do not need an usb solution any more.

          Regards

          Rigas
        Your message has been successfully submitted and would be delivered to recipients shortly.