Loading ...
Sorry, an error occurred while loading the content.

Re: flash image

Expand Messages
  • f.bratschi
    but what could be the problem, that i have no output on the rs232 interface? i think, 0x50000000 is the correct start address? thx flo
    Message 1 of 5 , Apr 2, 2010
    • 0 Attachment
      but what could be the problem, that i have no output on the rs232 interface? i think, 0x50000000 is the correct start address?

      thx flo

      --- In nslu2-general@yahoogroups.com, Mike Westerhof <mwester@...> wrote:
      >
      > f.bratschi wrote:
      > > hello mike
      > >
      > > i think, you dont know what i mean, i wanted to flash redboot from the slug image, but i did a mistake and erased the flash beginning on 0x5000000 and not 50000000 and so, if i reflash redboot, i dont get any messages on boot... i think there would be something below redboot?
      > >
      >
      > The image contains everything you should need to boot it, starting from
      > the very first address in flash.
      >
      > > flo
      > >
      > > --- In nslu2-general@yahoogroups.com, "Mike Westerhof (mwester)" <mwester@> wrote:
      > >
      > >> All unslung and SlugOS images on the nslu2-linux.org website are full
      > >> flash images, containing the redboot bootloader. (The various tools for
      > >> flashing your NSLU2 know not to reflash the bootloader, but we still go
      > >> through the trouble to put it in those images anyway, for exactly the
      > >> situations you are in.) Note that once you restore the flash image with
      > >> jtag, you'll have to reset the MAC address manually in the flash.
      > >> Information on where this is stored and/or how to do this should be on
      > >> the wiki.
      > >> -Mike (mwester)
      > >>
      > >> f.bratschi wrote:
      > >>
      > >>> hello
      > >>>
      > >>> could anyone provide me a full flash image? i wanted to use apex for my fat slug and destroyed redboot, then i wanted to flash redboot with urjtag, but does not seems to work, so i think, a full flash image would help me, beginning from the lowest adress on the flash.
      > >>>
      > >>> thx a lot
      > >>>
      > >>>
      > >>>
      >
      > -Mike (mwester)
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.