Loading ...
Sorry, an error occurred while loading the content.

Re: [nslu2-general] Re: flash image

Expand Messages
  • Mike Westerhof
    ... The image contains everything you should need to boot it, starting from the very first address in flash. ... -Mike (mwester)
    Message 1 of 5 , Apr 2, 2010
    • 0 Attachment
      f.bratschi wrote:
      > hello mike
      >
      > i think, you dont know what i mean, i wanted to flash redboot from the slug image, but i did a mistake and erased the flash beginning on 0x5000000 and not 50000000 and so, if i reflash redboot, i dont get any messages on boot... i think there would be something below redboot?
      >

      The image contains everything you should need to boot it, starting from
      the very first address in flash.

      > flo
      >
      > --- In nslu2-general@yahoogroups.com, "Mike Westerhof (mwester)" <mwester@...> wrote:
      >
      >> All unslung and SlugOS images on the nslu2-linux.org website are full
      >> flash images, containing the redboot bootloader. (The various tools for
      >> flashing your NSLU2 know not to reflash the bootloader, but we still go
      >> through the trouble to put it in those images anyway, for exactly the
      >> situations you are in.) Note that once you restore the flash image with
      >> jtag, you'll have to reset the MAC address manually in the flash.
      >> Information on where this is stored and/or how to do this should be on
      >> the wiki.
      >> -Mike (mwester)
      >>
      >> f.bratschi wrote:
      >>
      >>> hello
      >>>
      >>> could anyone provide me a full flash image? i wanted to use apex for my fat slug and destroyed redboot, then i wanted to flash redboot with urjtag, but does not seems to work, so i think, a full flash image would help me, beginning from the lowest adress on the flash.
      >>>
      >>> thx a lot
      >>>
      >>>
      >>>

      -Mike (mwester)
    • f.bratschi
      but what could be the problem, that i have no output on the rs232 interface? i think, 0x50000000 is the correct start address? thx flo
      Message 2 of 5 , Apr 2, 2010
      • 0 Attachment
        but what could be the problem, that i have no output on the rs232 interface? i think, 0x50000000 is the correct start address?

        thx flo

        --- In nslu2-general@yahoogroups.com, Mike Westerhof <mwester@...> wrote:
        >
        > f.bratschi wrote:
        > > hello mike
        > >
        > > i think, you dont know what i mean, i wanted to flash redboot from the slug image, but i did a mistake and erased the flash beginning on 0x5000000 and not 50000000 and so, if i reflash redboot, i dont get any messages on boot... i think there would be something below redboot?
        > >
        >
        > The image contains everything you should need to boot it, starting from
        > the very first address in flash.
        >
        > > flo
        > >
        > > --- In nslu2-general@yahoogroups.com, "Mike Westerhof (mwester)" <mwester@> wrote:
        > >
        > >> All unslung and SlugOS images on the nslu2-linux.org website are full
        > >> flash images, containing the redboot bootloader. (The various tools for
        > >> flashing your NSLU2 know not to reflash the bootloader, but we still go
        > >> through the trouble to put it in those images anyway, for exactly the
        > >> situations you are in.) Note that once you restore the flash image with
        > >> jtag, you'll have to reset the MAC address manually in the flash.
        > >> Information on where this is stored and/or how to do this should be on
        > >> the wiki.
        > >> -Mike (mwester)
        > >>
        > >> f.bratschi wrote:
        > >>
        > >>> hello
        > >>>
        > >>> could anyone provide me a full flash image? i wanted to use apex for my fat slug and destroyed redboot, then i wanted to flash redboot with urjtag, but does not seems to work, so i think, a full flash image would help me, beginning from the lowest adress on the flash.
        > >>>
        > >>> thx a lot
        > >>>
        > >>>
        > >>>
        >
        > -Mike (mwester)
        >
      Your message has been successfully submitted and would be delivered to recipients shortly.