Loading ...
Sorry, an error occurred while loading the content.

Re: Firmware for Print server

Expand Messages
  • wts_it_club
    Thanks for the link. I ve managed to eliminate that problem but now I still can t access the cups web page at 192.167.1.77:631 After some searching i found
    Message 1 of 6 , Sep 19, 2009
    • 0 Attachment
      Thanks for the link. I've managed to eliminate that problem but now I still can't access the cups web page at 192.167.1.77:631
      After some searching i found this in the cups log file.

      I [24/Oct/1935:23:13:05 +0000] Listening to 0.0.0.0:631 on fd 4...
      E [24/Oct/1935:23:13:05 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
      I [24/Oct/1935:23:13:05 +0000] Resuming new connection processing...


      What do you think I shoud do?
      Thanks

      --- In nslu2-general@yahoogroups.com, "janne5011" <janne5011@...> wrote:
      >
      > I think a solution is here:
      > http://www.nslu2-linux.org/wiki/OpenSlug/InstallCups
      >
      >
      > --- In nslu2-general@yahoogroups.com, "wts_it_club" <cs33@> wrote:
      > >
      > > Hi, Thanks for the reply.
      > > I've followed the instructions on the page. But when I try to start cups I get this
      > >
      > > insmod: error inserting '/opt/lib/modules/printer.o': -1 Invalid module format
      > > cupsd: Child exited with status 1!
      > >
      > > How do I fix this?
      > > Thank you (:
      > >
      > > --- In nslu2-general@yahoogroups.com, "janne5011" <janne5011@> wrote:
      > > >
      > > > Hello, you can use whatever, unslung, debian if printserver is what you will use your slug för,
      > > > read here:
      > > > http://www.nslu2-linux.org/wiki/HowTo/AddPrinter
      > > >
      > > > --- In nslu2-general@yahoogroups.com, "wts_it_club" <cs33@> wrote:
      > > > >
      > > > > Hi, I just got a NSLU2 and was wondering what would be the best firmware to use if I want to use the NSLU2 as a print server.
      > > > > Thanks (:
      > > > >
      > > >
      > >
      >
    • Paul Carmichael
      I spent absolutely ages setting mine up about 2 years ago. I was up all night pulling my hair out and almost threw the slug in the rubbish. However, I
      Message 2 of 6 , Oct 31, 2009
      • 0 Attachment
        I spent absolutely ages setting mine up about 2 years ago. I was up all night pulling my hair out and almost threw the slug in the rubbish. However, I eventually got it working on a mixed network (linux and windows) and it's been fine ever since. Truth is though, I can't remember what I did, and when I try to remember, I get all nervous and start shouting at the wife. So all I can offer to do is show my config files as they are now working perfectly (including samba - I couldn't get the XP box to print via ipp).

        Remind me which files they are, and I'll stick them on a web site.



        >
        >From: wts_it_club <cs33@...>
        >To: nslu2-general@yahoogroups.com
        >Sent: Sat, 19 September, 2009 9:40:34
        >Subject: [nslu2-general] Re: Firmware for Print server
        >
        >
        >Thanks for the link. I've managed to eliminate that problem but now I still can't access the cups web page at 192.167.1.77: 631
        >>After some searching i found this in the cups log file.
        >
        >>I [24/Oct/1935: 23:13:05 +0000] Listening to 0.0.0.0:631 on fd 4...
        >>E [24/Oct/1935: 23:13:05 +0000] Unable to open listen socket for address :::631 - Address family not supported by protocol.
        >>I [24/Oct/1935: 23:13:05 +0000] Resuming new connection processing.. .
        >
        >>What do you think I shoud do?
        > > >




        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.