Re: HELP! My NSLU2 is no longer seeing 1.5TB disk attached to disk1 USB
- The easiest thing to do is download a Live CD such as with Fedora,
Knoppix, or Fedora and boot your PC from that. You should then be
able to use your USB drive on your computer.
If you only used ext2, then you could install the windows drivers to
access the drive.
However, if you used lvm, mdadm, or some other Linux format, you will
need the Live CD.
--- In firstname.lastname@example.org, "Christopher Dadd"
> I have a NSLU2 running Unslung V2.3R63 and a 1.5tb drive attached to it
> on disk 1 usb.
> This morning I went to download some media from it and only a few
> directories were left on it. I rebooted the NSLU2 and the hard disk and
> the NSLU2 only boots from flash. It doesn't see the USB disk at all.
> I'm in a slight panic as I don't have a backup of the entire thing and
> of course the disk is not a windows format anymore. It's particularly
> irritating that I've ordered a raid array to keep a live back with but
> it's not arrived yet.
> What precise order to I switch on the slug and disk?
> What do I do next?