Loading ...
Sorry, an error occurred while loading the content.

Re: NSLU2 running Unslung6.8 no more reachable

Expand Messages
  • Ulrich Dietz
    and now I reflashed with unslung6.8 and do not reach nslu2 with 192.168.1.77 Is it over now? Ulrich
    Message 1 of 4 , Jan 21, 2008
    • 0 Attachment
      and now I reflashed with unslung6.8 and do not reach nslu2 with
      192.168.1.77
      Is it over now?

      Ulrich

      --- In nslu2-general@yahoogroups.com, "Ulrich Dietz" <elbmuendung@...>
      wrote:
      >
      > So,
      > both disks are ext3 formated by the nslu2
      > the 2nd disk ist the unslung disk (sda)
      > the 1st disk was connected when the nslu2 was running
      > 192.168.1.77 doesn't reply also
      >
      > the first disk was connected to the running nslu2 several times
      > before. Sometimes it worked, sometimes the web interface reported
      > theat both disks are not formated, BUT after reboot it always worked
      > well!
      > NOW it seems, that the nslu2 has forgotten hostname and ip address.
      > The boot behaviour is normal (without any disk it takes more time,
      > with the unslung disk sda, port 2 there is disk activity during boot
      > process and it is faster tahn without)
      >
      > Ist there any possibility to look for all ip adresses connected to my
      > switch? Or do I have tor "recover from bad flash"?
      >
      > Ulrich
      >
      > --- In nslu2-general@yahoogroups.com, "Mike \(mwester\)"
      > <mwester@> wrote:
      > >
      > > "Ulrich Dietz" <elbmuendung@> writes:
      > >
      > > > Hi there,
      > > > after doing a hotplug of the second disk my nslu2 is no more
      > reachable.
      > >
      > > Hotplug is not generally supported.
      > >
      > > > After reboot it boots normaly with both, only the unslung disk or
      > no
      > > > disk. All the leds are correct and all seems to work correct.
      > > > BUT I do not have a network connection to the nslu2.
      > > > Neither hostname nor ip-address.
      > > > What can I do?
      > >
      > > What format was the second disk (NTFS or FAT, or was it natively-
      > formatted
      > > on the NSLU2 at some time)? What ports where which devices
      > connected to?
      > > Did you try the default address (192.168.1.77) with no disks
      > attached?
      > >
      > > > regards
      > > >
      > > > Ulrich
      > >
      > > Mike (mwester)
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.