Loading ...
Sorry, an error occurred while loading the content.

Re: power plug size

Expand Messages
  • gweissenseel
    thanks that s exactly what I was looking for guenter ... http://www.sunpower.com.tw/showproduct2.asp?k1=13&k2=AC-DC&k3=Single%20Output ... 240 volts AC ...
    Message 1 of 3 , Jul 2 6:38 PM
    • 0 Attachment
      thanks that's exactly what I was looking for

      guenter

      --- In nslu2-general@yahoogroups.com, "Ian White"
      <iandavidwhite@...> wrote:
      >
      > Hi Guenter
      >
      > Existing Linksys PSU Model No. SA070507 (UK)
      >
      > 5.5 mm outer diameter
      > 2.5 mm internal diameter
      > 5 volts DC tip/centre positive
      > 2.0 amps
      >
      > I replaced my broken PSU with a
      >
      > Sunpower SPD-A15-05
      >
      >
      http://www.sunpower.com.tw/showproduct2.asp?k1=13&k2=AC-DC&k3=Single%20Output
      >
      > Acceptable *input* to this PSU is anywhere from 100 volts AC to
      240 volts AC
      > and it takes a standard 3-conductor computer power lead (i.e. no
      integrated mains plug)
      > so should be usable anywhere in the world
      >
      > But I had to cut'n'splice the existing Linksys NSLU2 PSU DC lead
      > because the Sunpower DC lead was 5.5mm OD/2.0mm ID
      >
      > (Also, as this replacement PSU is capable of 2.5 amps rather than
      the Linksys' original PSU's 2.0 amps
      > it happily drives a USB bus-powered 2.5" drive/enclosure through
      the NSLU2's USB ports)
      >
      > I hope that this helps
      >
      > Cheers
      > Ian W.
      >
      > ----- Original Message -----
      > From: gweissenseel
      > To: nslu2-general@yahoogroups.com
      > Sent: Monday, July 02, 2007 2:06 PM
      > Subject: [nslu2-general] power plug size
      >
      >
      > Does anybody know the plug size of the AC/DC transformer of the
      > NSLU2. I know the OD is 5.5mm what is the ID hole or pin
      diameter on
      > the device it self.
      >
      > thanks
      >
      > Guenter
      >
      >
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.