Re: 2 ext3 formatted drives on usb hub on port1 using unslung 6.8
- --- In firstname.lastname@example.org, "bayard_e" <bayard_e@...> wrote:
> I have been reading the wiki and the different posts for
> connecting 2 ext3 drives on a hub thru port 1 and it seemed that itis
> not possible to have more than 2 ext3 drive per port using linksysa
> frimware. Is this still the case if I use unslung 6.8? Or is there
> work around?With Unslung I had 4 drives connected to a hub on port 2.
> Thank you
2x 2.5" 80GB EXT3 - powered by hub
2x 3.5" 300GB NTFS - externally powered
The only thing you have to check is which disk it seen first by the
NSLU2 when you startup/reboot as they will be assigned names
accordingly. e.g. connect all 4 drives and startup the NSLU2, type
fdisk -l and check which drives have been called /dev/sda1,2,3,4 then
mount/edit your entries in /etc/fstab to match.