Loading ...
Sorry, an error occurred while loading the content.

OpenSlug 2.7 suddenly won't boot from flash

Expand Messages
  • Anders Spliid Hansen
    Hi! I have been running OpenSlug 2.7 from a flash stick flawlessly for about a year. Then suddenly yesterday, the flashdrive didn t mount at boot. The DISK1
    Message 1 of 1 , Nov 7, 2006
    • 0 Attachment
      Hi!

      I have been running OpenSlug 2.7 from a flash stick flawlessly for about
      a year. Then suddenly yesterday, the flashdrive didn't mount at boot.
      The DISK1 LED is on (green) when the Ready/Status LED is red, but when
      the Ready/Status goes from red to flashing yellow, the DISK1 LED goes
      off. I can SSH to the slug using the default password, and df shows no
      sign of /dev/sd* devices.

      I can mount the flashstick on my Linux desktop, so I guess the stick
      haven't failed. I have read through the FAQ and searched the
      mailinglists, and had no luck following:

      http://www.nslu2-linux.org/wiki/FAQ/DiskNotRecognized

      and those related.

      Please help!

      dmesg:

      Linux version 2.6.12.2 (openslug@...) (gcc version 3.4.4) #1
      Tue Sep 27 20:21:18 CDT 2005
      CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE)
      CPU0: D VIVT undefined 5 cache
      CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
      CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
      Machine: Linksys NSLU2
      Warning: bad configuration page, trying to continue
      Memory policy: ECC disabled, Data cache writeback
      On node 0 totalpages: 8192
      DMA zone: 8192 pages, LIFO batch:3
      Normal zone: 0 pages, LIFO batch:1
      HighMem zone: 0 pages, LIFO batch:1
      Built 1 zonelists
      Kernel command line: root=/dev/mtdblock4 rw rootfstype=jffs2 mem=32M@
      0x00000000 init=/linuxrc reboot=s noirqdebug console=ttyS0,115200n8
      PID hash table entries: 256 (order: 8, 4096 bytes)
      Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
      Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
      Memory: 32MB = 32MB total
      Memory: 30512KB available (1601K code, 153K data, 80K init)
      Calibrating delay loop... 131.48 BogoMIPS (lpj=657408)
      Mount-cache hash table entries: 512
      CPU: Testing write buffer coherency: ok
      NET: Registered protocol family 16
      PCI: IXP4xx is host
      PCI: IXP4xx Using indirect access for memory space
      PCI: bus0: Fast back to back transfers disabled
      dmabounce: registered device 0000:00:01.0 on pci bus
      dmabounce: registered device 0000:00:01.1 on pci bus
      dmabounce: registered device 0000:00:01.2 on pci bus
      SCSI subsystem initialized
      usbcore: registered new driver usbfs
      usbcore: registered new driver hub
      OpenN2 Misc I/O Driver Version 0.1.7
      init_jiffy=-29974
      setup_interrupts - jiffies=-29974 init_jiffy=-29974
      enable_irq(22) unbalanced from c0010cb0
      enable_irq(29) unbalanced from c0010cb8
      NetWinder Floating Point Emulator V0.97 (double precision)
      JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
      Initializing Cryptographic API
      IXP4xx Watchdog Timer: heartbeat 60 sec
      Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing
      disabled
      ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
      ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
      io scheduler noop registered
      io scheduler deadline registered
      RAMDISK driver initialized: 4 RAM disks of 10240K size 1024 blocksize
      IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
      IXP4XX-Flash.0: Found an alias at 0x800000 for the chip at 0x0
      Intel/Sharp Extended Query Table at 0x0031
      Using buffer write method
      cfi_cmdset_0001: Erase suspend on write enabled
      0: offset=0x0,size=0x20000,blocks=64
      Searching for RedBoot partition table in IXP4XX-Flash.0 at offset
      0x7e0000
      6 RedBoot partitions found on MTD device IXP4XX-Flash.0
      Creating 6 MTD partitions on "IXP4XX-Flash.0":
      0x00000000-0x00040000 : "RedBoot"
      0x00040000-0x00060000 : "SysConf"
      0x00060000-0x00160000 : "Kernel"
      0x00160000-0x00180000 : "Ramdisk"
      0x00180000-0x007e0000 : "Flashdisk"
      0x007e0000-0x00800000 : "FIS directory"
      PCI: enabling device 0000:00:01.2 (0140 -> 0142)
      ehci_hcd 0000:00:01.2: EHCI Host Controller
      ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
      ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000
      ehci_hcd 0000:00:01.2: park 0
      ehci_hcd 0000:00:01.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec
      2004
      hub 1-0:1.0: USB hub found
      hub 1-0:1.0: 5 ports detected
      ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
      PCI: enabling device 0000:00:01.0 (0140 -> 0142)
      ohci_hcd 0000:00:01.0: OHCI Host Controller
      ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
      ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000
      hub 2-0:1.0: USB hub found
      hub 2-0:1.0: 3 ports detected
      PCI: enabling device 0000:00:01.1 (0140 -> 0142)
      ohci_hcd 0000:00:01.1: OHCI Host Controller
      ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
      ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000
      hub 3-0:1.0: USB hub found
      hub 3-0:1.0: 2 ports detected
      usb 1-1: new high speed USB device using ehci_hcd and address 2
      Initializing USB Mass Storage driver...
      usb 1-1: device descriptor read/64, error -71
      usb 1-1: device descriptor read/64, error -71
      usb 1-1: new high speed USB device using ehci_hcd and address 3
      usb 1-1: device descriptor read/64, error -71
      usb 1-1: device descriptor read/64, error -71
      usb 1-1: new high speed USB device using ehci_hcd and address 4
      usb 1-1: device not accepting address 4, error -71
      usb 1-1: new high speed USB device using ehci_hcd and address 5
      usb 1-1: device not accepting address 5, error -71
      usbcore: registered new driver usb-storage
      USB Mass Storage support registered.
      i2c /dev entries driver
      LOADED Xicor x1205 RTC Dvr v0.9.3.3NPW
      Xicor x1205 RTC Dvr v0.9.3.3NPW attached on adapter
      NET: Registered protocol family 2
      IP: routing cache hash table of 512 buckets, 4Kbytes
      TCP established hash table entries: 2048 (order: 2, 16384 bytes)
      TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
      TCP: Hash tables configured (established 2048 bind 2048)
      NET: Registered protocol family 1
      VFS: Mounted root (jffs2 filesystem).
      Freeing init memory: 80K
      ixp400: module license 'unspecified' taints kernel.
      Module init.
      ixp425_eth:
      Initializing IXP425 NPE Ethernet driver software v. 1.1A
      ixp425_eth: CPU clock speed (approx) = 0 MHz
      [error] ixEthMiiPhyScan : unexpected Mii PHY ID 00008201
      ixp425_eth: npe0 is using the PHY at address 0
      ixp425_eth: npe1 is using the PHY at address 1
      ixp425_eth: ixEthMiiLinkStatus failed on PHY0.
      Can't determine
      the auto negotiated parameters. Using default values.
    Your message has been successfully submitted and would be delivered to recipients shortly.