Re: Bytecc ME-740U2 External 3.5" Drive Enclosure Successful
- --- In firstname.lastname@example.org, "Mark" <marksu98@y...> wrote:
> I wanted to share some more good news for those looking for a
> compatible drive enclosure. I hope this helps some of you out
> I have a Western Digital 250GB (model: WD2500JBRTL) in the Bytecc
> ME-740U2 USB2.0 drive enclosure. It's been very reliably with the
> NSLU2 so far. I've written over 100GB of data to it through the
> NSLU2, simultaneously written to it while reading (no lock ups),
> the drive is recognized after restarting the NSLU2 (no issue withI'm using the same enclosures with Maxtor 200GB drives. System
> drive not installed message).
worked fine for about 30 days, then it's gone into this intermittent
read only mode where I can read the drive but not write to it.
If I power cycle, this sometimes clears the problem.
However, and here's the weird thing, I had the *same* problem with a
Bytecc enclosure attached to a Windows XP box. All of a sudden the
drive went read only.
Anybody else run into this?