Re: Confirming that Unslung 5.5 was successful
- Your output looks ok and you are successfully unslung (the rootfs is
definitely your hard disk).
The wiki page is very outdated (for unslung 1.1), and should probably
be removed, but although I feel quite confident adding things to the
wiki, I'd rather leave it to the higher gods to decide on page
Note also that the figures you get from df depend on the size of the
Also if you lack basic unix knowledge, it escapes me why you want to
unslung your nslu2. If you want to learn about linux better start
installing e.g. fedora core on your pc.
Good luck, FM
--- In firstname.lastname@example.org, "Buck Jeffcott"
> I'm REALLY new the linux, but I read the confirm unslung page hereI just
> and the #df and #mount doesn't look anything like what I'm seeing.
> want to make sure that the drive is truelly unslung - is it justbecause
> that page is an example of a different version of unslung?0% /share/hdd/data
> # df
> Filesystem 1k-blocks Used Available Use% Mounted on
> rootfs 76723716 44332 75899912 0% /
> /dev/sda1 6528 5328 1200 82% /initrd
> /dev/sda1 76723716 44332 75899912 0% /
> /dev/sda1 76723716 44332 75899912
> /dev/sda2 116661 4144 1113134% /share/hdd/conf
> # mount
> /dev/sda1 on /initrd type jffs2 (rw)
> /dev/sda1 on / type ext3 (rw)
> /proc on /proc type proc (rw)
> usbdevfs on /proc/bus/usb type usbdevfs (rw)
> /dev/sda1 on /share/hdd/data type ext3 (rw)
> /dev/sda2 on /share/hdd/conf type ext3 (rw,sync)
> is that right?