Loading ...
Sorry, an error occurred while loading the content.

Confirming that Unslung 5.5 was successful

Expand Messages
  • Buck Jeffcott
    I m REALLY new the linux, but I read the confirm unslung page here http://www.nslu2-linux.org/wiki/HowTo/ConfirmUnslung and the #df and #mount doesn t look
    Message 1 of 2 , Aug 31 9:06 PM
    • 0 Attachment
      I'm REALLY new the linux, but I read the confirm unslung page here

      http://www.nslu2-linux.org/wiki/HowTo/ConfirmUnslung

      and the #df and #mount doesn't look anything like what I'm seeing. I just
      want to make sure that the drive is truelly unslung - is it just because
      that page is an example of a different version of unslung?

      # df
      Filesystem 1k-blocks Used Available Use% Mounted on
      rootfs 76723716 44332 75899912 0% /
      /dev/sda1 6528 5328 1200 82% /initrd
      /dev/sda1 76723716 44332 75899912 0% /
      /dev/sda1 76723716 44332 75899912 0% /share/hdd/data
      /dev/sda2 116661 4144 111313 4% /share/hdd/conf

      # mount
      /dev/sda1 on /initrd type jffs2 (rw)
      /dev/sda1 on / type ext3 (rw)
      /proc on /proc type proc (rw)
      usbdevfs on /proc/bus/usb type usbdevfs (rw)
      /dev/sda1 on /share/hdd/data type ext3 (rw)
      /dev/sda2 on /share/hdd/conf type ext3 (rw,sync)

      is that right?
    • fransmeulenbroeks
      Your output looks ok and you are successfully unslung (the rootfs is definitely your hard disk). The wiki page is very outdated (for unslung 1.1), and should
      Message 2 of 2 , Sep 1, 2005
      • 0 Attachment
        Your output looks ok and you are successfully unslung (the rootfs is
        definitely your hard disk).

        The wiki page is very outdated (for unslung 1.1), and should probably
        be removed, but although I feel quite confident adding things to the
        wiki, I'd rather leave it to the higher gods to decide on page
        removal.

        Note also that the figures you get from df depend on the size of the
        hard disk.
        Also if you lack basic unix knowledge, it escapes me why you want to
        unslung your nslu2. If you want to learn about linux better start
        installing e.g. fedora core on your pc.

        Good luck, FM

        --- In nslu2-general@yahoogroups.com, "Buck Jeffcott"
        <videogamemaster@h...> wrote:
        > I'm REALLY new the linux, but I read the confirm unslung page here
        >
        > http://www.nslu2-linux.org/wiki/HowTo/ConfirmUnslung
        >
        > and the #df and #mount doesn't look anything like what I'm seeing.
        I just
        > want to make sure that the drive is truelly unslung - is it just
        because
        > that page is an example of a different version of unslung?
        >
        > # df
        > Filesystem 1k-blocks Used Available Use% Mounted on
        > rootfs 76723716 44332 75899912 0% /
        > /dev/sda1 6528 5328 1200 82% /initrd
        > /dev/sda1 76723716 44332 75899912 0% /
        > /dev/sda1 76723716 44332 75899912
        0% /share/hdd/data
        > /dev/sda2 116661 4144 111313
        4% /share/hdd/conf
        >
        > # mount
        > /dev/sda1 on /initrd type jffs2 (rw)
        > /dev/sda1 on / type ext3 (rw)
        > /proc on /proc type proc (rw)
        > usbdevfs on /proc/bus/usb type usbdevfs (rw)
        > /dev/sda1 on /share/hdd/data type ext3 (rw)
        > /dev/sda2 on /share/hdd/conf type ext3 (rw,sync)
        >
        > is that right?
      Your message has been successfully submitted and would be delivered to recipients shortly.