Loading ...
Sorry, an error occurred while loading the content.
 

Newbie: install package problem

Expand Messages
  • y99it
    hi, i m very newbie. i have installed unslung 5.5 un my NSLU2 i connect in telnet the nslu2 i connect after my usb 80 Gb disk and the nslu2 recognize it i
    Message 1 of 6 , Aug 1, 2005
      hi,
      i'm very newbie.
      i have installed unslung 5.5 un my NSLU2
      i connect in telnet the nslu2
      i connect after my usb 80 Gb disk and the nslu2 recognize it
      i write after, on the shell /sbin/unsling disk1, and the system have
      create the directory on the external disk.
      Now i try install es. apache:
      ipkg ipkg install unslung-feeds
      ipkg update
      ipkg install apache

      the system download correctly the package, but at moment of install
      it on the disk, write: no space left on the device.

      (if the package is small the installation is ok)

      I want install the package on the external disk.

      Help me thanks

      Sorry for my english
    • Inge Bjørnvall Arnesen
      Did you reboot after unslinging? If not, you still have the flash as your rootfs. If you filled up the flash that way, you should reflash and try again. best,
      Message 2 of 6 , Aug 2, 2005
        Did you reboot after unslinging? If not, you still have the flash as your
        rootfs. If you filled up the flash that way, you should reflash and try
        again.

        best,

        -- Inge


        ----Original Message----
        From: nslu2-general@yahoogroups.com
        [mailto:nslu2-general@yahoogroups.com] On Behalf Of y99it
        Sent: 1. august 2005 20:05 To: nslu2-general@yahoogroups.com
        Subject: [nslu2-general] Newbie: install package problem

        > hi,
        > i'm very newbie.
        > i have installed unslung 5.5 un my NSLU2
        > i connect in telnet the nslu2
        > i connect after my usb 80 Gb disk and the nslu2 recognize
        > it
        > i write after, on the shell /sbin/unsling disk1, and the
        > system have
        > create the directory on the external disk.
        > Now i try install es. apache:
        > ipkg ipkg install unslung-feeds
        > ipkg update
        > ipkg install apache
        >
        > the system download correctly the package, but at moment
        > of install
        > it on the disk, write: no space left on the device.
        >
        > (if the package is small the installation is ok)
        >
        > I want install the package on the external disk.
        >
        > Help me thanks
        >
        > Sorry for my english
        >
        >
        >
        >
        >
        >
        >
        >
        > ------------------------ Yahoo! Groups Sponsor
        > --------------------~--> <font face=arial size=-1><a
        >
        href="http://us.ard.yahoo.com/SIG=12hasi6oj/M=362335.6886445.7839731.1510227
        /D=groups/S=1705005378:TM/Y=YAHOO/EXP=1122953114/A=2894361/R=0/SIG=13jmebhbo
        /*http://www.networkforgood.org/topics/education/digitaldivide/?source=YAHOO
        &cmpgn=GRP&RTP=http://groups.yahoo.com/">In
        > low income neighborhoods, 84% do not own computers. At
        > Network for Good, help bridge the Digital
        > Divide!</a>.</font>
        > --------------------------------------------------------------------~->
        >
        >
        > Yahoo! Groups Links
        >
        >
        >
      • y99it
        ok, i reflash, format external disk, unsling and.... REBOOT!!! finally, All work fine. This is my mistache: i not reboot after unslinging and the rootfs were
        Message 3 of 6 , Aug 2, 2005
          ok, i reflash, format external disk, unsling and.... REBOOT!!!

          finally, All work fine.
          This is my mistache: i not reboot after unslinging and the rootfs
          were in the flash

          Thanks

          --- In nslu2-general@yahoogroups.com, Inge Bjørnvall Arnesen
          <i.b.arnesen@f...> wrote:
          > Did you reboot after unslinging? If not, you still have the flash
          as your
          > rootfs. If you filled up the flash that way, you should reflash
          and try
          > again.
          >
          > best,
          >
          > -- Inge
          >
          >
          > ----Original Message----
          > From: nslu2-general@yahoogroups.com
          > [mailto:nslu2-general@yahoogroups.com] On Behalf Of y99it
          > Sent: 1. august 2005 20:05 To: nslu2-general@yahoogroups.com
          > Subject: [nslu2-general] Newbie: install package problem
          >
          > > hi,
          > > i'm very newbie.
          > > i have installed unslung 5.5 un my NSLU2
          > > i connect in telnet the nslu2
          > > i connect after my usb 80 Gb disk and the nslu2 recognize
          > > it
          > > i write after, on the shell /sbin/unsling disk1, and the
          > > system have
          > > create the directory on the external disk.
          > > Now i try install es. apache:
          > > ipkg ipkg install unslung-feeds
          > > ipkg update
          > > ipkg install apache
          > >
          > > the system download correctly the package, but at moment
          > > of install
          > > it on the disk, write: no space left on the device.
          > >
          > > (if the package is small the installation is ok)
          > >
          > > I want install the package on the external disk.
          > >
          > > Help me thanks
          > >
          > > Sorry for my english
          > >
          > >
          > >
          > >
          > >
          > >
          > >
          > >
          > > ------------------------ Yahoo! Groups Sponsor
          > > --------------------~--> <font face=arial size=-1><a
          > >
          >
          href="http://us.ard.yahoo.com/SIG=12hasi6oj/M=362335.6886445.7839731.
          1510227
          > /D=groups/S=1705005378:TM/Y=YAHOO/EXP=1122953114/A=2894361/R=0/SIG=
          13jmebhbo
          > /*http://www.networkforgood.org/topics/education/digitaldivide/?
          source=YAHOO
          > &cmpgn=GRP&RTP=http://groups.yahoo.com/">In
          > > low income neighborhoods, 84% do not own computers. At
          > > Network for Good, help bridge the Digital
          > > Divide!</a>.</font>
          > > -----------------------------------------------------------------
          ---~->
          > >
          > >
          > > Yahoo! Groups Links
          > >
          > >
          > >
        • grahame@falvey.net
          Hi Everyone, I am trying to get a USB hub working with my slug Unslung 5.5. I have an un-powered 1.1 hub with 2 ports that works fine, but when I try a
          Message 4 of 6 , Aug 2, 2005
            Hi Everyone,

            I am trying to get a USB hub working with my slug Unslung 5.5. I have an
            un-powered 1.1 hub with 2 ports that works fine, but when I try a powered
            4 port 2.0 hub by ednet (with nothing else connected) I get the familiar:

            new USB device 00:01.2-1.2, assigned address 4
            not enough configurations
            hub.c: new USB device 00:01.2-1.2, assigned address 5
            Naseem usb.c: not enough configurations

            I know that there are some limitation with the number of devices you can
            plug into the slug using Unslung, but all I have are the root FS (250G
            3.5" in an ICYBOX) and the hub. I wanted to get the hub working before I
            plugged anything else into it.

            Is there anywhere a list of USB hubs that have been tested and known to
            work with Unslung, or should I just go to Openslug? If I could source a
            hub that is known to work then I'll just go buy it just to get this
            working.

            Gra
          • tonymy01
            I have one of these: http://www.peridyme.com.au/index.php?fuseaction=product.view&productid=156 That looks (physically) the same as:
            Message 5 of 6 , Aug 2, 2005
              I have one of these:
              http://www.peridyme.com.au/index.php?fuseaction=product.view&productid=156
              That looks (physically) the same as:
              http://www.targus.com/us/product_details.asp?sku=PAUH217U
              And it has no probs with unslung (apart from the number of the device
              incrementing when hot plugging...)
              I had to mix and match having the hub, HDD, Topfield and usb-serial_pl2303
              cable though. The serial cable is plugged into the 2nd disk/flash port by
              itself (as the driver didn't work for it when plugged into the hub if I
              remember correctly), the hub is in disk1 port with the HDD and Topfield
              plugged into the hub to get it all working together.
              Here is some info that the slug reports about my USB:

              bash-2.05b# pwd
              /proc/bus/usb
              bash-2.05b# cat devices
              T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
              B: Alloc= 18/900 us ( 2%), #Int= 1, #Iso= 0
              D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
              P: Vendor=0000 ProdID=0000 Rev= 0.00
              S: Product=USB OHCI Root Hub
              S: SerialNumber=c3880000
              C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
              I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
              E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
              T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
              D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
              P: Vendor=067b ProdID=2303 Rev= 2.02
              C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
              I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
              E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
              E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
              E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
              T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
              B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
              D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
              P: Vendor=0000 ProdID=0000 Rev= 0.00
              S: Product=USB OHCI Root Hub
              S: SerialNumber=c387a000
              C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
              I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
              E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
              T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
              B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
              D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
              P: Vendor=0000 ProdID=0000 Rev= 2.04
              S: Manufacturer=Linux 2.4.22-xfs ehci_hcd
              S: Product=NEC Corporation USB 2.0
              S: SerialNumber=00:01.2
              C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
              I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
              E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
              T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
              D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
              P: Vendor=05e3 ProdID=0605 Rev= 6.0b
              S: Product=USB2.0 Hub
              C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
              I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
              E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
              T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#=113 Spd=480 MxCh= 0
              D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
              P: Vendor=11db ProdID=1000 Rev= 1.01
              S: Manufacturer=Topfield Co., Ltd.
              S: Product=Topfield (http://www.topfield.co.kr)
              S: SerialNumber=1000
              C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
              I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
              E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
              E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
              T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
              D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
              P: Vendor=05e3 ProdID=0702 Rev= 0.33
              S: Product=USB TO IDE
              C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 96mA
              I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
              E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
              E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
              T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=12 MxCh= 0
              D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
              P: Vendor=067b ProdID=2303 Rev= 2.02
              C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
              I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
              E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
              E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
              E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

              Here is a bit from /var/log/messages
              <46>Aug 2 18:36:59 klogd: hub.c: new USB device 00:01.2-1.3, assigned
              address 112
              <44>Aug 2 18:36:59 klogd: usb.c: USB device 112 (vend/prod 0x11db/0x1000)
              is not claimed by any active driver.
              <46>Aug 2 18:37:06 klogd: usb.c: USB disconnect on device 00:01.2-1.3
              address 112
              <46>Aug 2 18:37:32 klogd: hub.c: new USB device 00:01.2-1.3, assigned
              address 113
              <44>Aug 2 18:37:32 klogd: usb.c: USB device 113 (vend/prod 0x11db/0x1000)
              is not claimed by any active driver.

              (So each time my Topfield powers up, it "double hits" the usb and causes the
              above, I don't think there are detrimental issues at this stage however..)

              Cheers
              Tonymy01
              http://tonyspage.abock.de for Topfield Information



              -----Original Message-----
              From: nslu2-general@yahoogroups.com [mailto:nslu2-general@yahoogroups.com]
              On Behalf Of grahame@...
              Sent: Tuesday, 2 August 2005 11:19 PM
              To: nslu2-general@yahoogroups.com
              Subject: [nslu2-general] USB Hub Question


              Is there anywhere a list of USB hubs that have been tested and known to work
              with Unslung, or should I just go to Openslug? If I could source a hub that
              is known to work then I'll just go buy it just to get this working.

              Gra
            • grahame@falvey.net
              Hi Tony, Thanks for the info. I should be able to source the Targus one here in Austria. Maybe we should start adding the USB hubs and results in the yahoo
              Message 6 of 6 , Aug 3, 2005
                Hi
                Tony,

                Thanks for the info. I should be able to source the Targus one here in
                Austria.

                Maybe we should start adding the USB hubs and results in the yahoo database?

                Gra

                > I have one of these:
                > http://www.peridyme.com.au/index.php?fuseaction=product.view&productid=156
                > That looks (physically) the same as:
                > http://www.targus.com/us/product_details.asp?sku=PAUH217U
                > And it has no probs with unslung (apart from the number of the device
                > incrementing when hot plugging...)
                > I had to mix and match having the hub, HDD, Topfield and
                > usb-serial_pl2303
                > cable though. The serial cable is plugged into the 2nd disk/flash port by
                > itself (as the driver didn't work for it when plugged into the hub if I
                > remember correctly), the hub is in disk1 port with the HDD and Topfield
                > plugged into the hub to get it all working together.
                > Here is some info that the slug reports about my USB:
                >
                > bash-2.05b# pwd
                > /proc/bus/usb
                > bash-2.05b# cat devices
                > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
                > B: Alloc= 18/900 us ( 2%), #Int= 1, #Iso= 0
                > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
                > P: Vendor=0000 ProdID=0000 Rev= 0.00
                > S: Product=USB OHCI Root Hub
                > S: SerialNumber=c3880000
                > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
                > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
                > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
                > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
                > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
                > P: Vendor=067b ProdID=2303 Rev= 2.02
                > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
                > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
                > E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
                > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
                > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
                > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
                > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
                > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
                > P: Vendor=0000 ProdID=0000 Rev= 0.00
                > S: Product=USB OHCI Root Hub
                > S: SerialNumber=c387a000
                > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
                > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
                > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
                > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
                > B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
                > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
                > P: Vendor=0000 ProdID=0000 Rev= 2.04
                > S: Manufacturer=Linux 2.4.22-xfs ehci_hcd
                > S: Product=NEC Corporation USB 2.0
                > S: SerialNumber=00:01.2
                > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
                > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
                > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
                > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
                > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
                > P: Vendor=05e3 ProdID=0605 Rev= 6.0b
                > S: Product=USB2.0 Hub
                > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
                > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
                > E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
                > T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#=113 Spd=480 MxCh= 0
                > D: Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
                > P: Vendor=11db ProdID=1000 Rev= 1.01
                > S: Manufacturer=Topfield Co., Ltd.
                > S: Product=Topfield (http://www.topfield.co.kr)
                > S: SerialNumber=1000
                > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
                > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
                > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
                > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
                > T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 3 Spd=480 MxCh= 0
                > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
                > P: Vendor=05e3 ProdID=0702 Rev= 0.33
                > S: Product=USB TO IDE
                > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 96mA
                > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
                > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
                > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
                > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=12 MxCh= 0
                > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
                > P: Vendor=067b ProdID=2303 Rev= 2.02
                > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
                > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
                > E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
                > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
                > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
                >
                > Here is a bit from /var/log/messages
                > Aug 2 18:36:59 klogd: hub.c: new USB device 00:01.2-1.3, assigned
                > address 112
                > Aug 2 18:36:59 klogd: usb.c: USB device 112 (vend/prod 0x11db/0x1000)
                > is not claimed by any active driver.
                > Aug 2 18:37:06 klogd: usb.c: USB disconnect on device 00:01.2-1.3
                > address 112
                > Aug 2 18:37:32 klogd: hub.c: new USB device 00:01.2-1.3, assigned
                > address 113
                > Aug 2 18:37:32 klogd: usb.c: USB device 113 (vend/prod 0x11db/0x1000)
                > is not claimed by any active driver.
                >
                > (So each time my Topfield powers up, it "double hits" the usb
                > and causes the
                > above, I don't think there are detrimental issues at this stage
                > however..)
                >
                > Cheers
                > Tonymy01
                > http://tonyspage.abock.de for Topfield Information
                >
                >
                >
                > -----Original Message-----
                > From: nslu2-general@yahoogroups.com
                > [mailto:nslu2-general@yahoogroups.com]
                > On Behalf Of grahame@...
                > Sent: Tuesday, 2 August 2005 11:19 PM
                > To: nslu2-general@yahoogroups.com
                > Subject: [nslu2-general] USB Hub Question
                >
                >
                > Is there anywhere a list of USB hubs that have been tested and known to
                > work
                > with Unslung, or should I just go to Openslug? If I could source a hub
                > that
                > is known to work then I'll just go buy it just to get this working.
                >
                > Gra
                >
                >
                >
                >
                > YAHOO! GROUPS LINKS
                > Visit your group "nslu2-general" on the web.
                > To unsubscribe from this group, send an email to:
                > nslu2-general-unsubscribe@yahoogroups.com
                > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
                >
              Your message has been successfully submitted and would be delivered to recipients shortly.