Loading ...
Sorry, an error occurred while loading the content.

Re: [nslu2-general] Wanting to flash, but unable to test Redboot successfully first.

Expand Messages
  • .:: Awi ::.
    Hopefully this information usefull. HINT: Make sure click OK on hyperterminal on first ping reply, and press ctrl-C Step by step on Win XP * turn off NSLU2 *
    Message 1 of 5 , Jun 1, 2005
    • 0 Attachment
      Hopefully this information usefull.

      HINT: Make sure click OK on hyperterminal on first ping reply, and press ctrl-C

      Step by step on Win XP

      * turn off NSLU2

      * set network TCP/IP 192.168.0.2 subnet 255.255.255.0
      - click start - control panel - Network and Internet Connections -
      Network connection
      - right click on network adapter - left click on properties.
      - double click on Internet Protocol (TCP/IP)
      - Click on Use the following IP Address, type 192.168.0.2 and subnet
      mask 255.255.255.0
      - click OK, click OK, and close network connection

      * open command prompt
      - click Start - Run - type CMD [enter]
      - type on command prompt : ping -w 1 -t 192.168.0.1
      - "Request timed out." will show up

      * open hyperterminal
      - Click Start - All Programs - Accessories - Communications - Hyperterminal
      - type name : NSLU2 and click OK
      - Choose "TCP/IP (winsock) on Connect using
      - type 192.168.0.1 on host address
      - type 9000 on port number
      - don't click OK, go to next step.

      * turn on NSLU2

      * when see first Ping reply (Command Prompt Window),
      On Hyperterminal click OK and press Ctrl-C

      * RedBoot> show up, bingo, you got it :-)

      note. don't forget to change back to previous network setting.

      Awi
    Your message has been successfully submitted and would be delivered to recipients shortly.