Loading ...
Sorry, an error occurred while loading the content.

9052Re: Media Sharing questions

Expand Messages
  • stigslims
    Aug 20, 2013
    • 0 Attachment
      If i kill the pogoplug process what would be the command kill followed by pid number?. And the log looks something like this.

      2013-08-19 22:03:11 INFO: Loading configuration from: /opt/etc/mediatomb/config.xml
      2013-08-19 22:03:11 INFO: Checking configuration...
      2013-08-19 22:03:11 INFO: Setting filesystem import charset to ANSI_X3.4-1968
      2013-08-19 22:03:11 INFO: Setting metadata import charset to ANSI_X3.4-1968
      2013-08-19 22:03:11 INFO: Setting playlist charset to ANSI_X3.4-1968
      2013-08-19 22:03:11 ERROR: Error in config file: you can not specify interface and ip at the same time!

      I figure it speaks for itself, as in try the ip without the interface right?.
      --- In nslu2-general@yahoogroups.com, Anthony Takata <htwiz2002@...> wrote:
      >
      > Maybe. I'm not familiar with that device, so it it already has some sort of
      > service that does the same thing you could certainly try killin it. What
      > was the error this time?
      > On Aug 19, 2013 6:22 PM, "stigslims" <stigslim@...> wrote:
      >
      > > **
      > >
      > >
      > > Still no luck, entered as you suggested.
      > >
      > > <?xml version="1.0" encoding="UTF-8"?>
      > > <config version="1" xmlns="http://mediatomb.cc/config/1" xmlns:xsi="
      > > http://www.w3.org/2001/XMLSchema-instance" xsi:$
      > > <server>
      > > <ip>192.168.0.15</ip>
      > > <interface>eth0</interface>
      > > <ui enabled="yes">
      > > <accounts enabled="no" session-timeout="30">
      > >
      > > but after the start command (/opt/etc/init.d/S90mediatomb start)
      > > I get a start failed. I had a brain wave about the pogoplug service, would
      > > that running stop mediatomb, (in theory thay are both trying to do the same
      > > thing). Would they both be able to access eth0 at the same time?. How would
      > > i kill pogoplug and try mediatomb again? (if you think its wortha go).
      > >
      > > --- In nslu2-general@yahoogroups.com, Anthony Takata <htwiz2002@>
      > > wrote:
      > > >
      > > > No, the commands wouldn't go in config.xml.
      > > > However, I did find some info in the
      > > > Documentation<http://mediatomb.cc/pages/documentation#id2856362> that
      > > > says you can specify the IP to bind to in the config.
      > > > In the Server section, I would (for your case) put the following:
      > > > <config version="1" xmlns="http://mediatomb.cc/config/1" xmlns:xsi="
      > > > http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="
      > > > http://mediatomb.cc/config/1 http://mediatomb.cc/config/1.xsd">
      > > > <server>
      > > >
      > > > <ip>192.168.0.15</ip>
      > > >
      > > > <interface>eth0</interface>
      > > > ....
      > > >
      > > >
      > > >
      > > > On Sun, Aug 18, 2013 at 4:21 PM, stigslims <stigslim@> wrote:
      > > >
      > > > > **
      > > > >
      > > > >
      > > > > Tried the two lines straight into the command prompt with no luck, also
      > > > > checked the mediatomb.conf and config.xml files but no reference to an
      > > ip.
      > > > > Would the commands go in the config? if its worth a try does i matter
      > > where
      > > > > they go in. Other than that they could go in the config.xml.
      > > > >
      > > > >
      > > > > --- In nslu2-general@yahoogroups.com, Anthony Takata <htwiz2002@>
      > > > > wrote:
      > > > > >
      > > > > > Using them directly in the command line shouldn't cause any lasting
      > > > > > problems that a reboot can't fix.
      > > > > > I noticed that your ip wasn't 192.168.1.77, I think the configuration
      > > > > > tries to bind to that range. See if there's a line in the config that
      > > > > > specifies 192.168.1.?
      > > > > > If the commands break connectivity you should be able to just reboot
      > > back
      > > > > > to normal.
      > > > > > On Aug 18, 2013 7:40 AM, "stigslims" <stigslim@> wrote:
      > > > > >
      > > > > > > **
      > > > >
      > > > > > >
      > > > > > >
      > > > > > > Right I think I follow, just got to figure out where to put the
      > > > > commands.
      > > > > > > Followed ifconfig and got lots of info but the top output was as
      > > > > follows.
      > > > > > >
      > > > > > > eth0 Link encap:Ethernet HWaddr 00:25:31:01:B9:0E
      > > > > > > inet addr:192.168.0.15 Bcast:192.168.0.255 Mask:255.255.255.0
      > > > > > > inet6 addr: fe80::225:31ff:fe01:b90e/64 Scope:Link
      > > > > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
      > > > > > > RX packets:2994711 errors:0 dropped:0 overruns:0 frame:0
      > > > > > > TX packets:2276010 errors:0 dropped:0 overruns:0 carrier:0
      > > > > > > collisions:0 txqueuelen:1000
      > > > > > > RX bytes:3132816397 (2.9 GiB) TX bytes:1169394007 (1.0 GiB)
      > > > > > > Interrupt:40
      > > > > > >
      > > > > > > So eth0 looks like the one i'm using. Would typing those lines
      > > into the
      > > > > > > command promt cause any problems if i were to try them and they
      > > were
      > > > > in the
      > > > > > > wrong place?.
      > > > > > >
      > > > > > > --- In nslu2-general@yahoogroups.com, Anthony Takata <htwiz2002@>
      > > > > > > wrote:
      > > > > > > >
      > > > > > > > Well those are commands that would be entered either on the
      > > command
      > > > > line
      > > > > > > or
      > > > > > > > in a script. The first line adds a route to the devices internal
      > > > > > > > networking, the second seems to allow multicasting on that
      > > interface.
      > > > > > > > You can find out if it's eth0 or something else by using the
      > > command
      > > > > > > > ifconfig
      > > > > > > > On Aug 15, 2013 4:08 PM, "stigslims" <stigslim@> wrote:
      > > > > > > >
      > > > > > > > > **
      > > > > > > > >
      > > > > > > > >
      > > > > > > > > Happened upon the Mediatomb website and stumbled across
      > > something
      > > > > that
      > > > > > > > > points at just the problem i seem to be having.
      > > > > > > > >
      > > > > > > > > 4.1. Network Setup
      > > > > > > > >
      > > > > > > > > Some systems require a special setup on the network interface.
      > > If
      > > > > > > > > MediaTomb exits with UPnP Error -117, or if it does not
      > > respond to
      > > > > > > M-SEARCH
      > > > > > > > > requests from the renderer (i.e. MediaTomb is running, but your
      > > > > > > renderer
      > > > > > > > > device does not show it) you should try the following settings
      > > (the
      > > > > > > lines
      > > > > > > > > below assume that MediaTomb is running on a Linux machine, on
      > > > > network
      > > > > > > > > interface eth1):
      > > > > > > > >
      > > > > > > > > # route add -net 239.0.0.0 netmask 255.0.0.0 eth1
      > > > > > > > > # ifconfig eth1 allmulti
      > > > > > > > > Those settings will be applied automatically by the init.d
      > > startup
      > > > > > > script.
      > > > > > > > >
      > > > > > > > > You should also make sure that your firewall is not blocking
      > > port
      > > > > UDP
      > > > > > > port
      > > > > > > > > 1900 (required for SSDP) and UDP/TCP port of MediaTomb. By
      > > default
      > > > > > > > > MediaTomb will select a free port starting with 49152, however
      > > you
      > > > > can
      > > > > > > > > specify a port of your choice in the configuration file.
      > > > > > > > >
      > > > > > > > > Looks promising but not sure how or where to add the extra
      > > lines.
      > > > > Also
      > > > > > > i
      > > > > > > > > would have to find out which network interface i was using.
      > > > > > > > >
      > > > > > > > > --- In nslu2-general@yahoogroups.com, Anthony Takata
      > > <htwiz2002@>
      > > > > > > > > wrote:
      > > > > > > > > >
      > > > > > > > > > The grep command just looks through the running programs to
      > > see
      > > > > if
      > > > > > > > > > mediatomb is in the list. Based on your results, it seems to
      > > > > start
      > > > > > > then
      > > > > > > > > > stop without much fanfare.
      > > > > > > > > > It seems we're going to need to figure out why it's not
      > > doing the
      > > > > > > upnp
      > > > > > > > > > stuff (as shown in the log).
      > > > > > > > > > It almost seems as if it can't register something, I'll try
      > > and
      > > > > see
      > > > > > > what
      > > > > > > > > I
      > > > > > > > > > can dig up.
      > > > > > > > > > On Aug 14, 2013 3:15 PM, "stigslims" <stigslim@> wrote:
      > > > > > > > > >
      > > > > > > > > > > **
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > > > Yep that was me, and very good help it was too. The command
      > > > > without
      > > > > > > > > the -d
      > > > > > > > > > > was the same.
      > > > > > > > > > >
      > > > > > > > > > > ~ # /opt/bin/mediatomb -u root -g root -P
      > > > > > > /opt/var/run/mediatomb.pid -l
      > > > > > > > > > > /opt/var/log/mediatomb -m /opt/etc -f mediat
      > > > > > > > > > > omb -p 50500
      > > > > > > > > > >
      > > > > > > > > > > MediaTomb UPnP Server version 0.11.0 -
      > > http://mediatomb.cc/
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > >
      > > > > > >
      > > > >
      > > ===============================================================================
      > > > > > > > > > > Copyright 2005-2008 Gena Batsyan, Sergey Bostandzhyan,
      > > Leonhard
      > > > > > > Wimmer.
      > > > > > > > > > > MediaTomb is free software, covered by the GNU General
      > > Public
      > > > > > > License
      > > > > > > > > > > version 2
      > > > > > > > > > >
      > > > > > > > > > > And as for the grep command, i get something back but its
      > > not
      > > > > much.
      > > > > > > > > > >
      > > > > > > > > > > ~ # ps | grep mediatomb
      > > > > > > > > > > 22542 root 2224 S grep mediatomb
      > > > > > > > > > > ~ #
      > > > > > > > > > >
      > > > > > > > > > > Shine any more light on the subject?.
      > > > > > > > > > >
      > > > > > > > > > > --- In nslu2-general@yahoogroups.com, Anthony Takata
      > > > > <htwiz2002@>
      > > > > > > > > > > wrote:
      > > > > > > > > > > >
      > > > > > > > > > > > No worries, I was looking through my email archives and
      > > found
      > > > > > > out I
      > > > > > > > > was
      > > > > > > > > > > > helping you awhile back with the torrenting application.
      > > :)
      > > > > > > > > > > > What is the output without the "-d"? It seems you're
      > > using
      > > > > the
      > > > > > > latest
      > > > > > > > > > > > version from the repos (Mine is listing as "mediatomb -
      > > > > 0.11.0-5
      > > > > > > -
      > > > > > > > > UPnP
      > > > > > > > > > > AV
      > > > > > > > > > > > Mediaserver for Linux." from ipkg).
      > > > > > > > > > > > If you left it as is after running with "-d", does the
      > > > > command
      > > > > > > *ps |
      > > > > > > > > grep
      > > > > > > > > > > > mediatomb* show you output such as the following? ::
      > > > > > > > > > > > 9933 root 36188 S /opt/bin/mediatomb -d -u root -g root
      > > -P
      > > > > > > > > > > > /opt/var/run
      > > > > > > > > > > > 9934 root 36188 S /opt/bin/mediatomb -d -u root -g root
      > > -P
      > > > > > > > > > > > /opt/var/run
      > > > > > > > > > > > 9935 root 36188 S /opt/bin/mediatomb -d -u root -g root
      > > -P
      > > > > > > > > > > > /opt/var/run
      > > > > > > > > > > > 9937 root 2244 S grep mediatomb
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > > On Tue, Aug 13, 2013 at 12:45 PM, stigslims <stigslim@>
      > > > > wrote:
      > > > > > > > > > > >
      > > > > > > > > > > > > **
      > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > > > Ok, i ran it with the -d by mistake whilst getting a
      > > copy
      > > > > for
      > > > > > > you
      > > > > > > > > and
      > > > > > > > > > > what
      > > > > > > > > > > > > I got was this.
      > > > > > > > > > > > >
      > > > > > > > > > > > > ~ # /opt/bin/mediatomb -u root -g root -P
      > > > > > > > > /opt/var/run/mediatomb.pid -l
      > > > > > > > > > > > > /opt/var/log/mediatomb -m /opt/etc -f mediatomb -p
      > > 50500
      > > > > > > > > > > > >
      > > > > > > > > > > > > MediaTomb UPnP Server version 0.11.0 -
      > > > > http://mediatomb.cc/
      > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > >
      > > > > > >
      > > > >
      > > ===============================================================================
      > > > > > > > > > > > > Copyright 2005-2008 Gena Batsyan, Sergey Bostandzhyan,
      > > > > Leonhard
      > > > > > > > > Wimmer.
      > > > > > > > > > > > > MediaTomb is free software, covered by the GNU General
      > > > > Public
      > > > > > > > > License
      > > > > > > > > > > > > version 2
      > > > > > > > > > > > >
      > > > > > > > > > > > > ~ #
      > > > > > > > > > > > >
      > > > > > > > > > > > > Which look promising as there are no errors but it
      > > doesnt
      > > > > tell
      > > > > > > me
      > > > > > > > > its
      > > > > > > > > > > > > running properly and gives no URL. Sorry if it appears
      > > all
      > > > > > > over the
      > > > > > > > > > > place
      > > > > > > > > > > > > but im determined to get it going. I bet im driving you
      > > > > nuts
      > > > > > > lol.
      > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > > > --- In nslu2-general@yahoogroups.com, Anthony Takata
      > > > > > > <htwiz2002@>
      > > > > > > > > > > > > wrote:
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > Hmm, permission denied usually means it's trying to
      > > > > access
      > > > > > > that
      > > > > > > > > > > folder
      > > > > > > > > > > > > and
      > > > > > > > > > > > > > flopping on its' face at it.
      > > > > > > > > > > > > > Are you running mediatomb as root or another user
      > > that
      > > > > does
      > > > > > > not
      > > > > > > > > have
      > > > > > > > > > > > > access
      > > > > > > > > > > > > > to that folder (or does it even exist)?
      > > > > > > > > > > > > > Can you paste everything from the console when you
      > > try to
      > > > > > > run it
      > > > > > > > > > > > > (including
      > > > > > > > > > > > > > the command line itself)?
      > > > > > > > > > > > > >
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > On Mon, Aug 12, 2013 at 11:41 AM, stigslims
      > > <stigslim@>
      > > > > > > wrote:
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > > **
      > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > No sorry needed, i was just pointing out that
      > > someone
      > > > > > > somewhere
      > > > > > > > > > > must
      > > > > > > > > > > > > have
      > > > > > > > > > > > > > > had the same problem, i am greatful of the help.
      > > All
      > > > > the
      > > > > > > > > > > dependencies
      > > > > > > > > > > > > are
      > > > > > > > > > > > > > > present. Not sure about how to rename to rebuild
      > > the
      > > > > > > database.
      > > > > > > > > But
      > > > > > > > > > > i
      > > > > > > > > > > > > did
      > > > > > > > > > > > > > > try starting it the way you explained ( without
      > > the -d
      > > > > as
      > > > > > > not
      > > > > > > > > to
      > > > > > > > > > > run
      > > > > > > > > > > > > it as
      > > > > > > > > > > > > > > a deamon). All I got was (-sh: /root: Permission
      > > > > denied )
      > > > > > > but i
      > > > > > > > > > > have a
      > > > > > > > > > > > > > > funny feeling this means something i just dont
      > > have a
      > > > > clue
      > > > > > > > > about.
      > > > > > > > > > > Again
      > > > > > > > > > > > > > > thanks for your help.
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > --- In nslu2-general@yahoogroups.com, Anthony
      > > Takata
      > > > > > > > > <htwiz2002@>
      > > > > > > > > > > > > > > wrote:
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > Sorry I just got busy with real life stuff. ;)
      > > > > > > > > > > > > > > > So just to make sure I have everything straight,
      > > you
      > > > > > > have at
      > > > > > > > > > > least
      > > > > > > > > > > > > the
      > > > > > > > > > > > > > > > following packages installed:
      > > > > > > > > > > > > > > > *file*, *libexif*, *libstdc++*, *ossp-js*,
      > > *sqlite*,
      > > > > > > *zlib*,
      > > > > > > > > > > > > *expat*, *
      > > > > > > > > > > > > > > > taglib*
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > You have an */opt/etc/mediatomb.conf* file with
      > > the
      > > > > > > necessary
      > > > > > > > > > > inputs.
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > And running */opt/bin/mediatomb* results in the
      > > > > following
      > > > > > > > > > > information
      > > > > > > > > > > > > > > being
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > printed to stdin:
      > > > > > > > > > > > > > > > 2013-08-04 00:31:09 INFO: Loading configuration
      > > from:
      > > > > > > > > > > > > > > > /opt/etc/mediatomb/config.xml
      > > > > > > > > > > > > > > > 2013-08-04 00:31:09 INFO: Checking
      > > configuration...
      > > > > > > > > > > > > > > > 2013-08-04 00:31:09 INFO: Setting filesystem
      > > import
      > > > > > > charset
      > > > > > > > > to
      > > > > > > > > > > > > > > > ANSI_X3.4-1968
      > > > > > > > > > > > > > > > 2013-08-04 00:31:09 INFO: Setting metadata import
      > > > > > > charset to
      > > > > > > > > > > > > > > ANSI_X3.4-1968
      > > > > > > > > > > > > > > > 2013-08-04 00:31:09 INFO: Setting playlist
      > > charset to
      > > > > > > > > > > ANSI_X3.4-1968
      > > > > > > > > > > > > > > > 2013-08-04 00:31:09 INFO: Configuration check
      > > > > succeeded.
      > > > > > > > > > > > > > > > 2013-08-04 00:31:09 ERROR: main: upnp error -117
      > > > > > > > > > > > > > > > 2013-08-04 00:31:10 ERROR: upnp_cleanup:
      > > > > > > > > UpnpUnRegisterRootDevice
      > > > > > > > > > > > > failed
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > Then, I would recommend renaming
      > > /opt/etc/mediatomb
      > > > > to
      > > > > > > reset
      > > > > > > > > the
      > > > > > > > > > > > > > > > configuration (This should force it to rebuild
      > > the
      > > > > > > databases
      > > > > > > > > and
      > > > > > > > > > > a
      > > > > > > > > > > > > few
      > > > > > > > > > > > > > > > other things).
      > > > > > > > > > > > > > > > On my system, the mediatomb service is started
      > > with
      > > > > the
      > > > > > > > > command
      > > > > > > > > > > line:
      > > > > > > > > > > > > > > > /opt/bin/mediatomb -d -u root -g root -P
      > > > > > > > > > > /opt/var/run/mediatomb.pid
      > > > > > > > > > > > > -l
      > > > > > > > > > > > > > > > /opt/var/log/mediatomb -m /opt/etc -f mediatomb
      > > -p
      > > > > 50500
      > > > > > > > > > > > > > > > I'm assuming the *-d* makes it run in daemon
      > > mode, so
      > > > > > > try it
      > > > > > > > > > > without
      > > > > > > > > > > > > that
      > > > > > > > > > > > > > > > first.
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > On Sun, Aug 11, 2013 at 6:39 AM, stigslims
      > > <stigslim@
      > > > > >
      > > > > > > > > wrote:
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > **
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > Hi Adam, thanks for your input. Unfortunately
      > > I am
      > > > > one
      > > > > > > of
      > > > > > > > > those
      > > > > > > > > > > > > bloody
      > > > > > > > > > > > > > > > > minded types that won't give up. After buying
      > > my
      > > > > nice
      > > > > > > new
      > > > > > > > > TV
      > > > > > > > > > > and
      > > > > > > > > > > > > > > firing it
      > > > > > > > > > > > > > > > > up I refuse to not share content with it when I
      > > > > have a
      > > > > > > > > pogoplug
      > > > > > > > > > > > > running
      > > > > > > > > > > > > > > > > Optware not 20 feet from it. I can figure out
      > > how
      > > > > to
      > > > > > > > > configure
      > > > > > > > > > > > > servers
      > > > > > > > > > > > > > > just
      > > > > > > > > > > > > > > > > get stuck with the errors. I would have thought
      > > > > someone
      > > > > > > > > would
      > > > > > > > > > > have
      > > > > > > > > > > > > an
      > > > > > > > > > > > > > > idea
      > > > > > > > > > > > > > > > > on What's going wrong somewhere. But again
      > > Thanks
      > > > > for
      > > > > > > your
      > > > > > > > > > > advice.
      > > > > > > > > > > > > > > Cheers
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > --- In nslu2-general@yahoogroups.com, Adam
      > > Suhy
      > > > > > > > > <adam.suhy@>
      > > > > > > > > > > > > wrote:
      > > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > > I do not have a smart TV, so I am using a
      > > WDTV
      > > > > live
      > > > > > > to
      > > > > > > > > play
      > > > > > > > > > > media
      > > > > > > > > > > > > > > from my
      > > > > > > > > > > > > > > > > > pogoplug (streaming via SAMBA). It works
      > > well,
      > > > > and
      > > > > > > it is
      > > > > > > > > one
      > > > > > > > > > > of
      > > > > > > > > > > > > the
      > > > > > > > > > > > > > > few
      > > > > > > > > > > > > > > > > > devices that plays many video formats
      > > including
      > > > > avi,
      > > > > > > m4p,
      > > > > > > > > > > and mkv
      > > > > > > > > > > > > > > (Roku
      > > > > > > > > > > > > > > > > was
      > > > > > > > > > > > > > > > > > pretty limited on the video/audio format
      > > > > > > combinations).
      > > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > > > [Non-text portions of this message have been
      > > > > removed]
      > > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > > > [Non-text portions of this message have been
      > > removed]
      > > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > > >
      > > > > > > > > > > > > >
      > > > > > > > > > > > > >
      > > > > > > > > > > > > > [Non-text portions of this message have been removed]
      > > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > >
      > > > > > > > > > > > [Non-text portions of this message have been removed]
      > > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > > >
      > > > > > > > > >
      > > > > > > > > >
      > > > > > > > > > [Non-text portions of this message have been removed]
      > > > > > > > > >
      > > > > > > > >
      > > > > > > > >
      > > > > > > > >
      > > > > > > >
      > > > > > > >
      > > > > > > > [Non-text portions of this message have been removed]
      > > > > > > >
      > > > > > >
      > > > > > >
      > > > > > >
      > > > > >
      > > > > >
      > > > > > [Non-text portions of this message have been removed]
      > > > > >
      > > > >
      > > > >
      > > > >
      > > >
      > > >
      > > > [Non-text portions of this message have been removed]
      > > >
      > >
      > >
      > >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    • Show all 51 messages in this topic