Loading ...
Sorry, an error occurred while loading the content.

8879Re: Can Pogoplug mount an NFS network share and allow access from the web?

Expand Messages
  • ingenuitycapital
    Feb 16, 2013
    • 0 Attachment
      Is there a system variable that I could check that would tell me when the mount process should work?

      Ken

      --- In nslu2-general@yahoogroups.com, Anthony Takata <htwiz2002@...> wrote:
      >
      > The random mounting is a known issue as far as I know, I don't think anyone
      > has solved that part. You might try putting an artificial delay in your
      > script and have it run backgrounded, so that by the time the system is
      > ready the Mount process should work.
      > On Feb 16, 2013 5:03 PM, "ingenuitycapital" <kkam@...> wrote:
      >
      > > **
      > >
      > >
      > > Kevin's answer worked perfectly until I added a second USB drive to the
      > > Pogoplug Now it seems random whether the first USB drive is mounted as sda2
      > > or sdb2. I wrote a script that tries to mount the NFS share a folder on
      > > sda2 first and if that fails then try on sdb2. The script works when I run
      > > it after the Pogoplug has started up. But if I try to add it to the startup
      > > scripts called from rcS, the script does not mount the NFS share.
      > >
      > > There must be something in the startup process that must happen before you
      > > can mount the NFS share.
      > >
      > > But, even if I make the script be the last one to execute in the startup
      > > sequence, it does not work.
      > >
      > > Would appreciate anyone's thoughts on what to try next.
      > >
      > > Ken
      > >
      > > --- In nslu2-general@yahoogroups.com, Kevin Radziwon wrote:
      > > >
      > > > I put the mount points on a flash drive plugged into the pogo.
      > > >
      > > > Mount Path: /tmp/.cemnt/mnt_sda1/mount_point
      > > >
      > > > Your path may vary...
      > > >
      > > >
      > > >
      > > > ________________________________
      > > > From: ingenuitycapital
      > > > To: nslu2-general@yahoogroups.com
      > > > Sent: Wednesday, November 28, 2012 2:12 PM
      > > > Subject: [nslu2-general] Can Pogoplug mount an NFS network share and
      > > allow access from the web?
      > > >
      > > > Essentially, I would like to make the Pogoplug use a network share the
      > > same way it uses a USB drive.
      > > >
      > > > There is a thread from the old Pogoplug forums about using the pogoplug
      > > to share a WHS network drive on the web. Unfortunately the forum has been
      > > taken down so I can't see how it was done.
      > > >
      > > > I followed the directions here http://openpogo.tumblr.com/page/2 and
      > > was able to get the pogoplug to mount and access an NFS share from a
      > > terminal window, but not from my.pogoplug.com.
      > > >
      > > > To get this far I did the following:
      > > >
      > > > SSH in to the pogoplug
      > > > mkdir /tmp/nfs
      > > > mount -t nfs -o hard,udp,nolock 192.168.1.180:/mnt/user/Media /tmp/nfs
      > > >
      > > > I have a feeling that the pogoplug might need to have the network share
      > > mounted in a specific location to be picked up and shared by the pogoplug.
      > > Does anyone know if this is true and/or where the mountpoint needs to be?
      > > >
      > > >
      > > >
      > > > ------------------------------------
      > > >
      > > > Yahoo! Groups Links
      > > >
      > > >
      > > >
      > > > [Non-text portions of this message have been removed]
      > > >
      > >
      > >
      > >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    • Show all 11 messages in this topic