Loading ...
Sorry, an error occurred while loading the content.

8799Re: [nslu2-general] Re: Network Share access from Windows XP

Expand Messages
  • Myjunk
    Dec 3, 2012
      Shld be
      Encrypt password = no

      Sent from Apple's last year model

      On 3 Dec, 2012, at 18:34, Myjunk <mjunk.myjunk@...> wrote:

      > Hi,
      >
      > Simple problem. Had tht too. Go to ur global settings for smb.conf and out in plain password is yes
      >
      > Something along those lines. It's the way one of the hotfixes for winxp that caused either plain password or encrypted password being transmitted. U can google. (Sorry can't be more clear)
      >
      > But bottom line is the smb.conf file and some password settings.
      >
      > Sent from Apple's last year model
      >
      > On 3 Dec, 2012, at 17:55, "oddballhero" <oddballhero@...> wrote:
      >
      >> If your samba share path is at /tmp/.cemnt then explorer will report the maximum size of the share to be the size of /tmp so the samba share should be at the mount point of the drive /tmp/.cemnt/sda1 or setup a persistent mount (see previous posts).
      >>
      >> --- In nslu2-general@yahoogroups.com, "oddballhero" <oddballhero@...> wrote:
      >> >
      >> >
      >> >
      >> > Just some general stuff (some of which may pertain or not to you)
      >> >
      >> > So on command line:
      >> > See if smbd is running. Running on yours if you see the icon.
      >> > ps |grep smbd
      >> >
      >> > Make sure you have a valid samba user with smbpasswd.
      >> >
      >> > Check permissions.
      >> >
      >> > You can run testparm (google this) to check your smb.conf.
      >> >
      >> > See the bottom of: http://www.nslu2-linux.org/wiki/Optware/Plugadditions
      >> >
      >> > Once you get it working, back up your settings and then you can play with the smb.conf to tighten up security.
      >> >
      >> > --- In nslu2-general@yahoogroups.com, "calguy2123" <calguy2123@> wrote:
      >> > >
      >> > > I can see Pogoplug under Mshome in My Network Places, however it doesn't show any drives. When I double-click the Pogoplug icon, I get an error message saying \\Pogoplug is not accessible ...
      >> > >
      >> > > -bash-3.2# df
      >> > > Filesystem 1k-blocks Used Available Use% Mounted on
      >> > > /dev/mtdblock2 32768 15864 16904 48% /
      >> > > none 128004 12 127992 0% /tmp
      >> > > /tmp/.cemnt/sda1 976758780 356455688 620303092 36% /tmp/.cemnt/mnt_sda1
      >> > > /tmp/.cemnt/sdb1 15722708 190504 14733524 1% /tmp/.cemnt/mnt_sdb1
      >> > > /tmp/.cemnt/sdb1 15722708 190504 14733524 1% /opt
      >> > >
      >> > > -bash-3.2# mount
      >> > > rootfs on / type rootfs (rw)
      >> > > /dev/root on / type jffs2 (ro)
      >> > > none on /proc type proc (rw)
      >> > > none on /sys type sysfs (rw)
      >> > > none on /dev/pts type devpts (rw)
      >> > > none on /tmp type tmpfs (rw)
      >> > > none on /proc/bus/usb type usbfs (rw)
      >> > > /tmp/.cemnt/sda1 on /tmp/.cemnt/mnt_sda1 type ufsd (rw,nosuid,nodev,noexec,noatime,nls=utf8,uid=0,gid=0,fmask=22,dmask=22,nocase,sparse,force)
      >> > > /tmp/.cemnt/sdb1 on /tmp/.cemnt/mnt_sdb1 type ext3 (rw,nosuid,nodev,noexec,noatime,data=ordered)
      >> > > /tmp/.cemnt/sdb1 on /opt type ext3 (rw,data=ordered)
      >> > >
      >> > > Snippet from smb.conf
      >> > >
      >> > > [shared]
      >> > > path = /tmp/.cemnt
      >> > > public = yes
      >> > > writable = yes
      >> > > create mask = 0777
      >> > > browsable = yes
      >> > > available = yes
      >> > > read only = no
      >> > > guest ok = yes
      >> > > force user = root
      >> > >
      >> > > Any clues what could be wrong here?
      >> > >
      >> >
      >>
      >>


      [Non-text portions of this message have been removed]
    • Show all 8 messages in this topic