Loading ...
Sorry, an error occurred while loading the content.

8798Re: [nslu2-general] Re: Network Share access from Windows XP

Expand Messages
  • Myjunk
    Dec 3, 2012
    • 0 Attachment
      Hi,

      Simple problem. Had tht too. Go to ur global settings for smb.conf and out in plain password is yes

      Something along those lines. It's the way one of the hotfixes for winxp that caused either plain password or encrypted password being transmitted. U can google. (Sorry can't be more clear)

      But bottom line is the smb.conf file and some password settings.

      Sent from Apple's last year model

      On 3 Dec, 2012, at 17:55, "oddballhero" <oddballhero@...> wrote:

      > If your samba share path is at /tmp/.cemnt then explorer will report the maximum size of the share to be the size of /tmp so the samba share should be at the mount point of the drive /tmp/.cemnt/sda1 or setup a persistent mount (see previous posts).
      >
      > --- In nslu2-general@yahoogroups.com, "oddballhero" <oddballhero@...> wrote:
      > >
      > >
      > >
      > > Just some general stuff (some of which may pertain or not to you)
      > >
      > > So on command line:
      > > See if smbd is running. Running on yours if you see the icon.
      > > ps |grep smbd
      > >
      > > Make sure you have a valid samba user with smbpasswd.
      > >
      > > Check permissions.
      > >
      > > You can run testparm (google this) to check your smb.conf.
      > >
      > > See the bottom of: http://www.nslu2-linux.org/wiki/Optware/Plugadditions
      > >
      > > Once you get it working, back up your settings and then you can play with the smb.conf to tighten up security.
      > >
      > > --- In nslu2-general@yahoogroups.com, "calguy2123" <calguy2123@> wrote:
      > > >
      > > > I can see Pogoplug under Mshome in My Network Places, however it doesn't show any drives. When I double-click the Pogoplug icon, I get an error message saying \\Pogoplug is not accessible ...
      > > >
      > > > -bash-3.2# df
      > > > Filesystem 1k-blocks Used Available Use% Mounted on
      > > > /dev/mtdblock2 32768 15864 16904 48% /
      > > > none 128004 12 127992 0% /tmp
      > > > /tmp/.cemnt/sda1 976758780 356455688 620303092 36% /tmp/.cemnt/mnt_sda1
      > > > /tmp/.cemnt/sdb1 15722708 190504 14733524 1% /tmp/.cemnt/mnt_sdb1
      > > > /tmp/.cemnt/sdb1 15722708 190504 14733524 1% /opt
      > > >
      > > > -bash-3.2# mount
      > > > rootfs on / type rootfs (rw)
      > > > /dev/root on / type jffs2 (ro)
      > > > none on /proc type proc (rw)
      > > > none on /sys type sysfs (rw)
      > > > none on /dev/pts type devpts (rw)
      > > > none on /tmp type tmpfs (rw)
      > > > none on /proc/bus/usb type usbfs (rw)
      > > > /tmp/.cemnt/sda1 on /tmp/.cemnt/mnt_sda1 type ufsd (rw,nosuid,nodev,noexec,noatime,nls=utf8,uid=0,gid=0,fmask=22,dmask=22,nocase,sparse,force)
      > > > /tmp/.cemnt/sdb1 on /tmp/.cemnt/mnt_sdb1 type ext3 (rw,nosuid,nodev,noexec,noatime,data=ordered)
      > > > /tmp/.cemnt/sdb1 on /opt type ext3 (rw,data=ordered)
      > > >
      > > > Snippet from smb.conf
      > > >
      > > > [shared]
      > > > path = /tmp/.cemnt
      > > > public = yes
      > > > writable = yes
      > > > create mask = 0777
      > > > browsable = yes
      > > > available = yes
      > > > read only = no
      > > > guest ok = yes
      > > > force user = root
      > > >
      > > > Any clues what could be wrong here?
      > > >
      > >
      >
      >


      [Non-text portions of this message have been removed]
    • Show all 8 messages in this topic