8086Re: flash image
- Apr 2, 2010but what could be the problem, that i have no output on the rs232 interface? i think, 0x50000000 is the correct start address?
--- In firstname.lastname@example.org, Mike Westerhof <mwester@...> wrote:
> f.bratschi wrote:
> > hello mike
> > i think, you dont know what i mean, i wanted to flash redboot from the slug image, but i did a mistake and erased the flash beginning on 0x5000000 and not 50000000 and so, if i reflash redboot, i dont get any messages on boot... i think there would be something below redboot?
> The image contains everything you should need to boot it, starting from
> the very first address in flash.
> > flo
> > --- In email@example.com, "Mike Westerhof (mwester)" <mwester@> wrote:
> >> All unslung and SlugOS images on the nslu2-linux.org website are full
> >> flash images, containing the redboot bootloader. (The various tools for
> >> flashing your NSLU2 know not to reflash the bootloader, but we still go
> >> through the trouble to put it in those images anyway, for exactly the
> >> situations you are in.) Note that once you restore the flash image with
> >> jtag, you'll have to reset the MAC address manually in the flash.
> >> Information on where this is stored and/or how to do this should be on
> >> the wiki.
> >> -Mike (mwester)
> >> f.bratschi wrote:
> >>> hello
> >>> could anyone provide me a full flash image? i wanted to use apex for my fat slug and destroyed redboot, then i wanted to flash redboot with urjtag, but does not seems to work, so i think, a full flash image would help me, beginning from the lowest adress on the flash.
> >>> thx a lot
> -Mike (mwester)
- << Previous post in topic