7853Re: [nslu2-general] Dead power brick
- Jun 9, 2009How about one of the following:
I am personally using "4)" from above to run my slug after its PSU failed
and it has been working fine for over a year, but it isn't the cheapest option
So if you wanted to go for "2)" then you may need to change the DC power plug/connector for one that is a different size.
You can either re-use the plug/lead from your dead PSU.
Or you can buy one of: http://www.maplin.co.uk/module.aspx?TabID=1&criteria=usb&ModuleNo=43084&C=SO&U=Strat15
----- Original Message -----
From: Urban Cubbage
Sent: Tuesday, June 09, 2009 12:24 AM
Subject: RE: [nslu2-general] Dead power brick
The specs you gave off of the brick indicates that it is 5 volts 2 amp. So
any 5 volt brick with same plug that is rated for 2 amp or above will work.
I have replaced my brick twice and got a 5 volt 3 amp the last time and it
has worked without a problem since. I have also put the brick on a UPS for
protection of it.
From: email@example.com [mailto:firstname.lastname@example.org]
On Behalf Of adflyer_09
Sent: Sunday, June 07, 2009 10:23 AM
Subject: [nslu2-general] Dead power brick
A few weeks back I noticed that my slug was continually rebooting. As it
wasn't really required and the power brick was buried behind cupboards, I
just pulled the power plug out of the unit and left it. Today I decided to
find out what was wrong with it. Turns out the power brick is now completely
I opened it up (using the suggested chopsticks and vice method!) only to
discover sooty marks on the big yellow transformer, R9 burnt out and most
spectacularly, the top of the U1 IC blown off! Little wonder it no longer
Can anyone recommend a specific replacement for the original "AD 5/2A" /
"SA070507" ? I'm happy to go digging to find one, but just thought I'd ask
first as it may save me some time.
Alternatively, does anyone have one they no longer need?
(I'm in the UK, so looking for a 3-pin brick, although the Linksys original
Yahoo! Groups Links
[Non-text portions of this message have been removed]
- << Previous post in topic Next post in topic >>