Loading ...
Sorry, an error occurred while loading the content.

7708Re: Bricked NSLU2 ?

Expand Messages
  • janne5011
    Feb 7, 2009
    • 0 Attachment
      The little bugger is indeed hard to get rid of=)

      >
      > I managed to find myself a 5V 3A power supply and everything is just
      > fine. Thank god the little bugger is still working :)
      >
      > -H
      >
      >
      > --- In nslu2-general@yahoogroups.com, "sdm485" <steve@> wrote:
      > >
      > > The power supply has probably died but the NSLU2 is OK. You could
      > connect a voltmeter
      > > to the ends to see what is there. I would be careful about the
      > replacement power supply
      > > though. The NSLU2 feeds the power supply voltage directly to the USB
      > ports (so it can drive
      > > USB hard drives I expect) so the voltage is important. I would
      > suggest you get a similar
      > > regulated 5V supply. The ones that come with USB hubs are a good
      > choice but you would
      > > have to change the connector.
      > > Steve
      > >
      > >
      > > --- In nslu2-general@yahoogroups.com, "Harsh Baste" <harshbaste@>
      wrote:
      > > >
      > > > I recently brought along my NSLU2 from the US and plugged it into a
      > > > power socket in Singapore. Unfortunately I wasn't paying
      attention to
      > > > the power adaptor rating and it turns out that the adaptor doesn't
      > > > step down the input supply current from 230V/60Hz (Asia) to
      110V/50Hz
      > > > (US).
      > > >
      > > > The NSLU2 doesn't power up of course but what I'm more worried about
      > > > is - have I bricked the NSLU2 or just bricked the power adapter?
      > > >
      > > > Any assistance would be appreciated.
      > > >
      > > > Thanks,
      > > > H
      > > >
      > >
      >
    • Show all 4 messages in this topic