Loading ...
Sorry, an error occurred while loading the content.

7396Re: Corrupt internal memory

Expand Messages
  • janne5011
    May 22, 2008
    • 0 Attachment
      I read your msg again and I see you got a windows machine.Its more
      easy use serccom tool with windows, since you dont know your password
      on the linux machine.
      In this forum click on "Files" and there is "Upgrade-
      file_2007_XP.exe".
      No need for a linux CD=).


      --- In nslu2-general@yahoogroups.com, "sd_vmax" <sd_vmax@...> wrote:
      >
      > Thanks, Janne
      >
      > I need more detail.
      >
      > I stated in my first message that I already entered upgrade mode.
      >
      > Please re-read my questions.
      >
      >
      > > > After booting to Lunix, what is the next step?
      > > > How do you connect to the slug?
      > > > How do I "run as root"? When I attempted to open a terminal
      > window
      > > as
      > > > root, it asked for a password. What is the password? Is this
      the
      > > > right window?
      >
      > > > How do I install and run upslug2?
      >
      > > > I typed "upslug2" in a regular terminal window. It
      > said, "Command
      > > not
      > > > found".
      >
      >
      > --- In nslu2-general@yahoogroups.com, "janne5011" <janne5011@>
      > wrote:
      > >
      > > Hello, you need to shutdown the NSLU2 and unplug all USB cables
      and
      > > devices.keep NSLU2 connected to network ,or connected to the
      puter
      > > with uplsug. Then enter upgrade mode by pull down the reset
      button
      > > until the readylight on your slug start to blink.Pull down that
      > > button same time you press the startbutton.
      > > Then take your Unslung-6.10-beta.bin-file and with the upslug
      tool
      > > upload that file. after its done nslu2 reboots and your done.
      > > good luck/J
      > >
      > > --- In nslu2-general@yahoogroups.com, "sd_vmax" <sd_vmax@> wrote:
      > > >
      > > > I corrupted my internal memory by unplugging prior to shutting
      > > down.
      > > > I am trying to reflash my slug. Prior to being corrupted, it
      was
      > > > running this file as firmware:
      > > >
      > > > Unslung-6.10-beta.bin
      > > >
      > > > I have a Windows PC, so I got a Lunix bootable CD. The PC
      boots
      > to
      > > > Lunix fine. I successfully put my slug in upgrade mode. I
      > plugged
      > > my
      > > > slug's ethernet connection directly into my PC's ethernet
      > > connection.
      > > > There are to other devices connected to the slug.
      > > >
      > > > I don't know how to proceed from here.
      > > >
      > > > I read all of the instructions here:
      > > >
      > > > http://www.nslu2-linux.org/wiki/Main/UpSlug2
      > > >
      > > >
      > > > After booting to Lunix, what is the next step?
      > > > How do you connect to the slug?
      > > > How do I "run as root"? When I attempted to open a terminal
      > window
      > > as
      > > > root, it asked for a password. What is the password? Is this
      the
      > > > right window?
      > > > I typed "upslug2" in a regular terminal window. It
      > said, "Command
      > > not
      > > > found".
      > > >
      > > > Any help?
      > > >
      > > > Thanks,
      > > >
      > > > Brian
      > > >
      > >
      >
    • Show all 6 messages in this topic