7327Re: Newby question - NTFS partition not recognized
- Apr 25, 2008I haven't tried installing ipkg-web, I will do that now in the mean
time I have learned the fdisk command and here are the results if it
# fdisk -l /dev/sdb
Disk /dev/sdb: 255 heads, 63 sectors, 30515 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 16084 129192808+ 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary:
phys=(704, 239, 63) should be (704, 254, 63)
/dev/sdb2 16084 30515 115917480 f Win95 Ext'd (LBA)
Partition 2 does not end on cylinder boundary:
phys=(677, 239, 63) should be (677, 254, 63)
/dev/sdb5 16084 30515 115917448+ 7 HPFS/NTFS
It appears that I want to mount /dev/sdb1 but this still fails
now to install ipkg-web
--- In firstname.lastname@example.org, Marcel Nijenhof <nslu2@...>
> On Fri, 2008-04-25 at 14:47 +0000, Sean wrote:
> > I have tried mounting them it always fails.
> > when I type in mount, it shows my HDD_1_1_1 on sdb5 (rather than
> > sdb1 as is suggested on R63diskbehaviour site.
> Sdb5 is the first extended partition. So probably this
> disk contains a extended partition in stead of a
> primaire partition.
> Are you able to install the package "ipkg-web".
> After that browse to the page:
> http://<your slug>/Management/sluginfo.cgi
> And sent the result (you can mail it directly to me if
> you don't want to post the results on the list).
> In that case i have the compleet information of the
> slug including the disk partitions and the boot messages.
> More information:
> Marcel Nijenhof
> Optware package develpor
- << Previous post in topic Next post in topic >>