Loading ...
Sorry, an error occurred while loading the content.

7140Re: Write on Soundbridge display

Expand Messages
  • doctordiller
    Feb 1, 2008
      Thanks, this all looks real good but unfortunately I do not use
      Debian. Does anyone have a solution for optware ? I don't think there
      is a ipkg telnet package available. Is it possible to simulate telnet
      in anyway ?
      Thanks.

      --- In nslu2-general@yahoogroups.com, "Sam" <sam@...> wrote:
      >
      > --- In nslu2-general@yahoogroups.com, "doctordiller" <jacob@>
      > wrote:
      > >
      > > Hey,
      > > Yes you can probably use a shell script and telnet. That is what
      I
      > > would like to know how :-) I'm new to this stuff and would like
      to
      > > know how to telnet OUT from the slug to the soundbridge. An
      example
      > > would be appreciated.
      > > Thanks,
      > > --- In nslu2-general@yahoogroups.com, "Sam" <sam@> wrote:
      > > >
      > > > --- In nslu2-general@yahoogroups.com, "doctordiller" <jacob@>
      > wrote:
      > > > >
      > > > > Hi,
      > > > > I have been working on a nice little setup where I have my
      slug
      > > > > downloading torrents and FTP them to my network mediea
      player.
      > > I'm
      > > > > using a simple sh script to process the torrent file and FTP
      > the
      > > > > downloaded file to a folder on my network player.
      > > > > What I would like to do is write a status on my soundbridge
      > while
      > > the
      > > > > torrent is downloading (% done, copying file, file ready,
      ect.)
      > > Does
      > > > > anyone know how to write to the display of the soundbridge
      from
      > a
      > > sh
      > > > > script. I know about telnet to port 4444 and 5555 but I
      basicly
      > > don't
      > > > > know how to achive this from a .sh
      > > > > Thanks,
      > > > >
      > > >
      > > > Cant tell you yet.. Just installing my Soundbridge now
      > > >
      > > > I presume you can use a shell script to open a telnet
      connection,
      > > login
      > > > and input whatever you want it to display...?
      > > >
      > > > Will see what i can find out
      > > >
      > > >
      > > > Sam
      > > >
      > >
      >
      >
      > SLUG:~# telnet
      > -bash: telnet: command not found
      > SLUG:~# apt-get install telnet
      > <snip>
      > SLUG:~# telnet
      > telnet> o
      > (to) 192.168.0.30 4444
      > Trying 192.168.0.30...
      > Connected to 192.168.0.30.
      > Escape character is '^]'.
      >
      >
      > Welcome to the SoundBridge Shell version 3.0.49 Release
      > Type '?' for help or 'help <command>' for help on <command>.
      >
      > SoundBridge>
      >
      >
      >
      >
      >
      > For a really basic script:
      >
      > SLUG:/home/sam# ./soundbridge.sh
      > Trying 192.168.0.30...
      > Connected to 192.168.0.30.
      > Escape character is '^]'.
      >
      >
      > Welcome to the SoundBridge Shell version 3.0.49 Release
      > Type '?' for help or 'help <command>' for help on <command>.
      >
      > SoundBridge> ^]
      > telnet> quit
      > Connection closed.
      >
      >
      >
      > SLUG:/home/sam# cat soundbridge.sh
      > #!/bin/sh
      >
      > telnet 192.168.0.30 4444
      >
      >
      >
      > SoundBridge> ?
      > Valid commands are:
      > ? - displays this list
      > help - provides help on a command
      > clear - clears the terminal window
      > stty - sets shell tty parameters
      > consoleprint - sets consoleprint on or off
      > version - prints out the software version
      > exit - exits the shell
      > cycles - displays a count of processor cycles
      > uptime - reports system uptime
      > reboot - reboots the system
      > ps - lists threads
      > ifconfig - lists network interface configurations
      > ping - pings an ip address
      > ipset - sets up a manual config
      > mfg - performs mfg tests
      > sketch - draw on the display
      > irman - capture, monitor or send IR commands
      > memstat - prints out memory statistics
      > romcheck - print rom sizes
      > log - dump the persistent log
      > logclear - clear the log
      > logadd - add string to log
      > attract - attract eyeballs
      > irwait - wait for a specific IR command
      > displaytype - print type of currently connected DISplay
      > time - displays the current time
      > clearsettings - clears CascadeSettings and reboots
      > softwareupgrade - perform software upgrades from network or local
      > storage
      > srbmod - modify srb for oem test
      > rcp - enter the RCP shell
      >
      >
      >
      >
      > They provide some developer stuff... So it'll proably need looking
      > into
      >
      >
      >
      > Sam
      >
    • Show all 7 messages in this topic