Loading ...
Sorry, an error occurred while loading the content.

7026Re: NSLU2 not responding

Expand Messages
  • first_tube2001
    Jan 5, 2008
    • 0 Attachment
      Thanks for the response. In switching countries, I also switched
      routers - which led to a new ip for the DNS. I had not considered
      this, and the NSLU2 defaulted back to 192.168.1.77 - despite my router
      So I figured it out now.

      Thanks!

      --- In nslu2-general@yahoogroups.com, "janne5011" <janne5011@...> wrote:
      >
      > Hi tried to connect it direct to your PC without router, with and
      > without usb-stick connected? If it cant be reached, put it in upgrade
      > mode and look if sercomm tool find it, and if its found, decide if
      > you want to re-unlsung it.
      >
      > --- In nslu2-general@yahoogroups.com, "first_tube2001"
      > <D.kochman@> wrote:
      > >
      > > So, I moved from the Netherlands to the US, and my NSLU2 isn't
      > working
      > > anymore. =/
      > >
      > > it is uNSLUng, I don't remember exactly which version, but it was
      > done
      > > approximately 2 years ago, and I've updated it in the meantime -
      > > definitely not the current version though.
      > >
      > > I plugged it in with the usb key in Disk2, which is where it always
      > > was, and working happily. My router picks up that it is at
      > > 192.168.1.102, and has the proper MAC address and name. Ping to
      > this
      > > address does not work - "Destination unreachable). I opened up all
      > > the ports, figuring maybe with the new router (Linksys 54Gv8 stock
      > > version) might be blocking the traffic. However, no go.
      > >
      > > The Ready Status light was blinking green for a very long time, and
      > > making a beep every 30 seconds or so. After about 10 minutes, it
      > went
      > > to solid green. Ping still does not work. Ethernet and Disk2 are
      > > solid green. I turned it off, and looked at the USB key contents of
      > > /var/log/messages. Nothing looks suspicious to my eyes, but maybe
      > > someone else will see something?
      > >
      > > ****************************************************************
      > >
      > > <46>Jan 1 01:00:26 klogd: NET4: Linux TCP/IP 1.0 for NET4.0
      > > <46>Jan 1 01:00:26 klogd: IP Protocols: ICMP, UDP, TCP, IGMP
      > > <46>Jan 1 01:00:26 klogd: IP: routing cache hash table of 512
      > > buckets, 4Kbytes
      > > <46>Jan 1 01:00:26 klogd: TCP: Hash tables configured (established
      > > 2048 bind 4096)
      > > <43>Jan 1 01:00:26 klogd: IP-Config: No network devices available.
      > > <46>Jan 1 01:00:26 klogd: NET4: Unix domain sockets 1.0/SMP for
      > Linux
      > > NET4.0.
      > > <44>Jan 1 01:00:26 klogd: NetWinder Floating Point Emulator V0.97
      > > (double precision)
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00120000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00140000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00160000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00180000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x001a0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x001c0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x001e0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00200000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00220000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00240000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00260000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00280000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x002a0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x002c0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x002e0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00300000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00320000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00340000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00360000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00380000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x003a0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x003c0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x003e0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x004a0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x004c0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x004e0000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00500000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00520000
      > > <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      > > (0x2005) found at offset 0x00540000
      > > <44>Jan 1 01:00:26 klogd: VFS: Mounted root (jffs2 filesystem).
      > > <46>Jan 1 01:00:26 klogd: Freeing init memory: 244K
      > > <46>Jan 1 01:00:26 klogd: hub.c: new USB device 00:01.2-2, assigned
      > > address 2
      > > <44>Jan 1 01:00:26 klogd: Device descriptor:8 bytes received.
      > > <44>Jan 1 01:00:26 klogd: Device descriptor:18 bytes received.
      > > <44>Jan 1 01:00:26 klogd: Protocol: Transparent SCSI
      > > <44>Jan 1 01:00:26 klogd: *** detect:usb-storage
      > > <44>Jan 1 01:00:26 klogd: * scsi_register: usb-storage-0,
      > > <44>Jan 1 01:00:26 klogd: * scsi_reg, hostno:0 prot is 50
      > > <44>Jan 1 01:00:26 klogd: * scsi_reg, retval->host_no:0
      > > <46>Jan 1 01:00:26 klogd: scsi0 : SCSI emulation for USB Mass
      > Storage
      > > devices
      > > <44>Jan 1 01:00:26 klogd: ! scan_scsis
      > > <44>Jan 1 01:00:26 klogd: *** 50
      > > <44>Jan 1 01:00:26 klogd: Vendor: Imation Model: Flash
      > Drive
      > > Rev: 1.00
      > > <44>Jan 1 01:00:26 klogd: Type: Direct-
      > Access
      > > ANSI SCSI revision: 02
      > > <44>Jan 1 01:00:26 klogd: Attached scsi removable disk sda at
      > scsi0,
      > > channel 0, id 0, lun 0
      > > <44>Jan 1 01:00:26 klogd: SCSI device sda: 999424 512-byte hdwr
      > > sectors (512 MB)
      > > <44>Jan 1 01:00:26 klogd: 32 port connect!!!!!
      > > <44>Jan 1 01:00:26 klogd: sda: Write Protect is off
      > > <46>Jan 1 01:00:26 klogd: Partition check:
      > > <46>Jan 1 01:00:26 klogd: /dev/scsi/host0/bus0/target0/lun0: p1
      > p2 p3
      > > <47>Jan 1 01:00:26 klogd: WARNING: USB Mass Storage data integrity
      > > not assured
      > > <47>Jan 1 01:00:26 klogd: USB Mass Storage device found at 2
      > > <46>Jan 1 01:00:26 klogd: EXT3-fs: INFO: recovery required on
      > > readonly filesystem.
      > > <46>Jan 1 01:00:26 klogd: abled during recovery.
      > > <46>Jan 1 01:00:26 klogd: kjournald starting. Commit interval 5
      > seconds
      > > <46>Jan 1 01:00:26 klogd: EXT3-fs: recovery complete.
      > > <46>Jan 1 01:00:26 klogd: EXT3-fs: mounted filesystem with ordered
      > > data mode.
      > > <46>Jan 1 01:00:26 klogd: EXT3 FS 2.4-0.9.19, 19 August 2002 on
      > > sd(8,1), internal journal
      > > <44>Jan 1 01:00:26 klogd: Module init.
      > > <46>Jan 1 01:00:26 klogd: ixp425_eth:
      > > <44>Jan 1 01:00:26 klogd: Initializing IXP425 NPE Ethernet driver
      > > software v. 1.1
      > > <46>Jan 1 01:00:26 klogd: ixp425_eth: CPU clock speed (approx) = 0
      > MHz
      > > <44>Jan 1 01:00:26 klogd: [error] ixEthMiiPhyScan : unexpected Mii
      > > PHY ID 00008201
      > > <46>Jan 1 01:00:26 klogd: ixp425_eth: ixp0 is using the PHY at
      > address 1
      > > <46>Jan 1 01:00:26 klogd: ixp425_eth: ixp1 is using the PHY at
      > address 0
      > > <44>Jan 1 01:00:26 klogd: ixp425_eth: ixEthMiiLinkStatus failed on
      > PHY0.
      > > <44>Jan 1 01:00:26 klogd: ^ICan't determine
      > > <44>Jan 1 01:00:26 klogd: the auto negotiated parameters. Using
      > > default values.
      > > <44>Jan 1 01:00:26 klogd: enable_irq(22) unbalanced from c39451bc
      > > <46>Jan 1 01:00:26 klogd: X1226: I2C based RTC driver.
      > > <44>Jan 1 01:00:26 klogd: i2c-core.o: driver X1226 registered.
      > > <46>Jan 1 01:00:26 klogd: X1226: found X1226 on IXP425 I2C Adapter
      > > <44>Jan 1 01:00:26 klogd: i2c-core.o: client [X1226] registered to
      > > adapter [IXP425 I2C Adapter](pos. 0).
      > > <44>Jan 1 01:00:26 klogd: atr is 20
      > > <45>Jan 1 01:00:26 klogd: ufsd: driver loaded
      > > <46>Jan 1 01:02:16 klogd: kjournald starting. Commit interval 5
      > seconds
      > > <44>Jan 1 01:02:16 klogd: EXT3-fs warning: maximal mount count
      > > reached, running e2fsck is recommended
      > > <46>Jan 1 01:02:16 klogd: EXT3 FS 2.4-0.9.19, 19 August 2002 on
      > > sd(8,2), internal journal
      > > <46>Jan 1 01:02:16 klogd: EXT3-fs: recovery complete.
      > > <46>Jan 1 01:02:16 klogd: EXT3-fs: mounted filesystem with ordered
      > > data mode.
      > > <46>Jan 1 01:02:22 klogd: Adding Swap: 127852k swap-space
      > (priority -1)
      > > <38>Jan 5 04:56:39 sshd[486]: Server listening on 0.0.0.0 port 22.
      > > <158>Jan 5 04:56:42 rsyncd[493]: rsyncd version 2.6.9 starting,
      > > listening on port 873
      > > <78>Jan 5 04:56:59 cron[431]: loading crontab file /etc/crontab
      > > <46>Jan 5 04:57:03 System log daemon exiting.
      > >
      >
    • Show all 3 messages in this topic