Loading ...
Sorry, an error occurred while loading the content.

7021NSLU2 not responding

Expand Messages
  • first_tube2001
    Jan 4, 2008
    • 0 Attachment
      So, I moved from the Netherlands to the US, and my NSLU2 isn't working
      anymore. =/

      it is uNSLUng, I don't remember exactly which version, but it was done
      approximately 2 years ago, and I've updated it in the meantime -
      definitely not the current version though.

      I plugged it in with the usb key in Disk2, which is where it always
      was, and working happily. My router picks up that it is at
      192.168.1.102, and has the proper MAC address and name. Ping to this
      address does not work - "Destination unreachable). I opened up all
      the ports, figuring maybe with the new router (Linksys 54Gv8 stock
      version) might be blocking the traffic. However, no go.

      The Ready Status light was blinking green for a very long time, and
      making a beep every 30 seconds or so. After about 10 minutes, it went
      to solid green. Ping still does not work. Ethernet and Disk2 are
      solid green. I turned it off, and looked at the USB key contents of
      /var/log/messages. Nothing looks suspicious to my eyes, but maybe
      someone else will see something?

      ****************************************************************

      <46>Jan 1 01:00:26 klogd: NET4: Linux TCP/IP 1.0 for NET4.0
      <46>Jan 1 01:00:26 klogd: IP Protocols: ICMP, UDP, TCP, IGMP
      <46>Jan 1 01:00:26 klogd: IP: routing cache hash table of 512
      buckets, 4Kbytes
      <46>Jan 1 01:00:26 klogd: TCP: Hash tables configured (established
      2048 bind 4096)
      <43>Jan 1 01:00:26 klogd: IP-Config: No network devices available.
      <46>Jan 1 01:00:26 klogd: NET4: Unix domain sockets 1.0/SMP for Linux
      NET4.0.
      <44>Jan 1 01:00:26 klogd: NetWinder Floating Point Emulator V0.97
      (double precision)
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00120000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00140000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00160000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00180000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x001a0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x001c0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x001e0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00200000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00220000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00240000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00260000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00280000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x002a0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x002c0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x002e0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00300000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00320000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00340000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00360000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00380000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x003a0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x003c0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x003e0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x004a0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x004c0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x004e0000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00500000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00520000
      <45>Jan 1 01:00:26 klogd: Unknown but compatible feature node
      (0x2005) found at offset 0x00540000
      <44>Jan 1 01:00:26 klogd: VFS: Mounted root (jffs2 filesystem).
      <46>Jan 1 01:00:26 klogd: Freeing init memory: 244K
      <46>Jan 1 01:00:26 klogd: hub.c: new USB device 00:01.2-2, assigned
      address 2
      <44>Jan 1 01:00:26 klogd: Device descriptor:8 bytes received.
      <44>Jan 1 01:00:26 klogd: Device descriptor:18 bytes received.
      <44>Jan 1 01:00:26 klogd: Protocol: Transparent SCSI
      <44>Jan 1 01:00:26 klogd: *** detect:usb-storage
      <44>Jan 1 01:00:26 klogd: * scsi_register: usb-storage-0,
      <44>Jan 1 01:00:26 klogd: * scsi_reg, hostno:0 prot is 50
      <44>Jan 1 01:00:26 klogd: * scsi_reg, retval->host_no:0
      <46>Jan 1 01:00:26 klogd: scsi0 : SCSI emulation for USB Mass Storage
      devices
      <44>Jan 1 01:00:26 klogd: ! scan_scsis
      <44>Jan 1 01:00:26 klogd: *** 50
      <44>Jan 1 01:00:26 klogd: Vendor: Imation Model: Flash Drive
      Rev: 1.00
      <44>Jan 1 01:00:26 klogd: Type: Direct-Access
      ANSI SCSI revision: 02
      <44>Jan 1 01:00:26 klogd: Attached scsi removable disk sda at scsi0,
      channel 0, id 0, lun 0
      <44>Jan 1 01:00:26 klogd: SCSI device sda: 999424 512-byte hdwr
      sectors (512 MB)
      <44>Jan 1 01:00:26 klogd: 32 port connect!!!!!
      <44>Jan 1 01:00:26 klogd: sda: Write Protect is off
      <46>Jan 1 01:00:26 klogd: Partition check:
      <46>Jan 1 01:00:26 klogd: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
      <47>Jan 1 01:00:26 klogd: WARNING: USB Mass Storage data integrity
      not assured
      <47>Jan 1 01:00:26 klogd: USB Mass Storage device found at 2
      <46>Jan 1 01:00:26 klogd: EXT3-fs: INFO: recovery required on
      readonly filesystem.
      <46>Jan 1 01:00:26 klogd: abled during recovery.
      <46>Jan 1 01:00:26 klogd: kjournald starting. Commit interval 5 seconds
      <46>Jan 1 01:00:26 klogd: EXT3-fs: recovery complete.
      <46>Jan 1 01:00:26 klogd: EXT3-fs: mounted filesystem with ordered
      data mode.
      <46>Jan 1 01:00:26 klogd: EXT3 FS 2.4-0.9.19, 19 August 2002 on
      sd(8,1), internal journal
      <44>Jan 1 01:00:26 klogd: Module init.
      <46>Jan 1 01:00:26 klogd: ixp425_eth:
      <44>Jan 1 01:00:26 klogd: Initializing IXP425 NPE Ethernet driver
      software v. 1.1
      <46>Jan 1 01:00:26 klogd: ixp425_eth: CPU clock speed (approx) = 0 MHz
      <44>Jan 1 01:00:26 klogd: [error] ixEthMiiPhyScan : unexpected Mii
      PHY ID 00008201
      <46>Jan 1 01:00:26 klogd: ixp425_eth: ixp0 is using the PHY at address 1
      <46>Jan 1 01:00:26 klogd: ixp425_eth: ixp1 is using the PHY at address 0
      <44>Jan 1 01:00:26 klogd: ixp425_eth: ixEthMiiLinkStatus failed on PHY0.
      <44>Jan 1 01:00:26 klogd: ^ICan't determine
      <44>Jan 1 01:00:26 klogd: the auto negotiated parameters. Using
      default values.
      <44>Jan 1 01:00:26 klogd: enable_irq(22) unbalanced from c39451bc
      <46>Jan 1 01:00:26 klogd: X1226: I2C based RTC driver.
      <44>Jan 1 01:00:26 klogd: i2c-core.o: driver X1226 registered.
      <46>Jan 1 01:00:26 klogd: X1226: found X1226 on IXP425 I2C Adapter
      <44>Jan 1 01:00:26 klogd: i2c-core.o: client [X1226] registered to
      adapter [IXP425 I2C Adapter](pos. 0).
      <44>Jan 1 01:00:26 klogd: atr is 20
      <45>Jan 1 01:00:26 klogd: ufsd: driver loaded
      <46>Jan 1 01:02:16 klogd: kjournald starting. Commit interval 5 seconds
      <44>Jan 1 01:02:16 klogd: EXT3-fs warning: maximal mount count
      reached, running e2fsck is recommended
      <46>Jan 1 01:02:16 klogd: EXT3 FS 2.4-0.9.19, 19 August 2002 on
      sd(8,2), internal journal
      <46>Jan 1 01:02:16 klogd: EXT3-fs: recovery complete.
      <46>Jan 1 01:02:16 klogd: EXT3-fs: mounted filesystem with ordered
      data mode.
      <46>Jan 1 01:02:22 klogd: Adding Swap: 127852k swap-space (priority -1)
      <38>Jan 5 04:56:39 sshd[486]: Server listening on 0.0.0.0 port 22.
      <158>Jan 5 04:56:42 rsyncd[493]: rsyncd version 2.6.9 starting,
      listening on port 873
      <78>Jan 5 04:56:59 cron[431]: loading crontab file /etc/crontab
      <46>Jan 5 04:57:03 System log daemon exiting.
    • Show all 3 messages in this topic