Loading ...
Sorry, an error occurred while loading the content.

Re: [NTB] Can't get v.7.1/fv to save option changes or re-open open documents

Expand Messages
  • ecto
    Alex, thank you. That was brilliant. I actually didn t transfer my NotePro.ini file from v. 4.95 thinking that that v.7.1 would set up its own .ini file which
    Message 1 of 6 , Jan 15, 2013
    • 0 Attachment
      Alex, thank you. That was brilliant. I actually didn't transfer my NotePro.ini file from v. 4.95 thinking that that v.7.1 would set up its own .ini file which I could just edit. When I saw that wasn't possible, I tried to copy and paste the old v.4.95 .ini file in the C://Program Files/NoteTab7 directory. Windows Vista would not allow me to do that. Instead, I followed your suggestion. I uninstalled 7.1 and re-installed it to C://NoteTab7. Into that directory I was able to paste the older NotePro.ini file. Now I have all my old settings and open documents.

      This problem was caused by Windows Vista (Windows 6). I still don't understand why they made it more difficult than necessary, with the permissions feature. I struggled for about a week just to upgrade Adobe Reader from v. 10 to v. 11, following multiple steps and advice from Adobe support.

      Thank you again, Alex. It's wonderful to get such a fast and helpful response.

      Cheers,
      Joel

      --- In notetab@yahoogroups.com, Alec Burgess wrote:
      >
      > Oops .. I just re-read your post. substitute Vista for Win-7 in the
      > following. :-[
      >
      > Your problem is (I'm almost certain) that on Win-7 by default you don't
      > have permission to write to the Program Files location where you
      > installed NoteTab. When Notetab is opened, it checks for the existence
      > of notepro.ini in that folder and if *NOT FOUND* instead puts all the
      > subfolders for favorites, libraries etc that used to be there in
      > previous (ie. Notetab 4.95) versions in:
      > C:\Documents and Settings\Alec\Application Data\NoteTab Pro\NotePro.ini
      > (on WInXP) and (I think)
      > C:\Users\ \Application Data\NoteTab Pro\NotePro.ini
      >
      > I suspect you just copied your old notetab setup to the Win-7
      > %progfiles% location after installing it. Correct?
      > If so, there are a bunch of ways to correct.
      > Simplest might be to just:
      > (1) uninstall your current Win-7 Notetab (after making a backup copy
      > just for safety)
      > (2) create a new top level folder (say) C:\myProgramFiles (this should
      > give you write access)
      > (3) Install Notetab in (say) C:\myProgramFiles\Notetab Pro.
      > (4) Copy the same control files you copied from your old system to the
      > Vista laptop.
      > and finally ...
      > (5) Run Notetab and verify that favorites, option etc. are now being
      > saved across program restarts.
      >
      >
      > On 2013-01-15 16:56, ecto wrote:
      > > This is very frustrating. I have been using Note Tab Pro v.4.95 on my
      > > older Windows 98 computer for years. I just upgraded to v.7.1 on my
      > > Windows Vista SP2 Toshiba laptop.
      > >
      > > I opened my favorite documents in Note Tab Pro, edited the options,
      > > and hid the ruler, line numbers, and the clip book to provide maximum
      > > display space for the documents.
      > >
      > > In Options, Reload Open Documents is checked.
      > >
      > > However, none of these settings remain saved. Every time I reopen Note
      > > Tab Pro my previously open documents are closed. They do not even
      > > appear in the Reopen tab. I again see the ruler, line numbers, and
      > > clip book. Readme.txt, Readme.otl, and WhatsNew.txt are the only
      > > documents which appear whenever the program opens.
      > >
      > > I can't figure out how to save my option changes or re-open important
      > > documents.
      > >
      > > I'd really appreciate some help in this very basic issue, and in
      > > understanding what is causing the problem. Thanks in advance.
      > --
      > Regards ... Alec (buralex@gmail & WinLiveMess - alec.m.burgess@skype)
      >
    • John Shotsky
      You can read about how to use NoteTab 7 in Vista-Win7 in the general help section. There are multiple approaches, but the ONE thing you cannot do is have files
      Message 2 of 6 , Jan 15, 2013
      • 0 Attachment
        You can read about how to use NoteTab 7 in Vista-Win7 in the general help section. There are multiple approaches, but
        the ONE thing you cannot do is have files in C:\Program Files that need to be edited by a program. Generally, Windows
        will move such edited files to a shadow copy location which is in a hidden folder. You can find it by searching. But, as
        with all Windows programs, you must run an install to install them, and an uninstall to uninstall them. NoteTab will
        operate just fine in Vista and Win7, even in the Program Files section, if you simply do a normal install. If you want
        everything local to a NoteTab folder, as I do, then it can't be installed in Program Files. I have a folder called
        C:\Programs where I install all programs that aren't explicitly written for Win7.

        Regards,
        John
        RecipeTools Web Site: <http://recipetools.gotdns.com/> http://recipetools.gotdns.com/

        From: notetab@yahoogroups.com [mailto:notetab@yahoogroups.com] On Behalf Of ecto
        Sent: Tuesday, January 15, 2013 15:22
        To: notetab@yahoogroups.com
        Subject: Re: [NTB] Can't get v.7.1/fv to save option changes or re-open open documents


        Alex, thank you. That was brilliant. I actually didn't transfer my NotePro.ini file from v. 4.95 thinking that that
        v.7.1 would set up its own .ini file which I could just edit. When I saw that wasn't possible, I tried to copy and paste
        the old v.4.95 .ini file in the C://Program Files/NoteTab7 directory. Windows Vista would not allow me to do that.
        Instead, I followed your suggestion. I uninstalled 7.1 and re-installed it to C://NoteTab7. Into that directory I was
        able to paste the older NotePro.ini file. Now I have all my old settings and open documents.

        This problem was caused by Windows Vista (Windows 6). I still don't understand why they made it more difficult than
        necessary, with the permissions feature. I struggled for about a week just to upgrade Adobe Reader from v. 10 to v. 11,
        following multiple steps and advice from Adobe support.

        Thank you again, Alex. It's wonderful to get such a fast and helpful response.

        Cheers,
        Joel

        --- In notetab@yahoogroups.com <mailto:notetab%40yahoogroups.com> , Alec Burgess wrote:
        >
        > Oops .. I just re-read your post. substitute Vista for Win-7 in the
        > following. :-[
        >
        > Your problem is (I'm almost certain) that on Win-7 by default you don't
        > have permission to write to the Program Files location where you
        > installed NoteTab. When Notetab is opened, it checks for the existence
        > of notepro.ini in that folder and if *NOT FOUND* instead puts all the
        > subfolders for favorites, libraries etc that used to be there in
        > previous (ie. Notetab 4.95) versions in:
        > C:\Documents and Settings\Alec\Application Data\NoteTab Pro\NotePro.ini
        > (on WInXP) and (I think)
        > C:\Users\ \Application Data\NoteTab Pro\NotePro.ini
        >
        > I suspect you just copied your old notetab setup to the Win-7
        > %progfiles% location after installing it. Correct?
        > If so, there are a bunch of ways to correct.
        > Simplest might be to just:
        > (1) uninstall your current Win-7 Notetab (after making a backup copy
        > just for safety)
        > (2) create a new top level folder (say) C:\myProgramFiles (this should
        > give you write access)
        > (3) Install Notetab in (say) C:\myProgramFiles\Notetab Pro.
        > (4) Copy the same control files you copied from your old system to the
        > Vista laptop.
        > and finally ...
        > (5) Run Notetab and verify that favorites, option etc. are now being
        > saved across program restarts.
        >
        >
        > On 2013-01-15 16:56, ecto wrote:
        > > This is very frustrating. I have been using Note Tab Pro v.4.95 on my
        > > older Windows 98 computer for years. I just upgraded to v.7.1 on my
        > > Windows Vista SP2 Toshiba laptop.
        > >
        > > I opened my favorite documents in Note Tab Pro, edited the options,
        > > and hid the ruler, line numbers, and the clip book to provide maximum
        > > display space for the documents.
        > >
        > > In Options, Reload Open Documents is checked.
        > >
        > > However, none of these settings remain saved. Every time I reopen Note
        > > Tab Pro my previously open documents are closed. They do not even
        > > appear in the Reopen tab. I again see the ruler, line numbers, and
        > > clip book. Readme.txt, Readme.otl, and WhatsNew.txt are the only
        > > documents which appear whenever the program opens.
        > >
        > > I can't figure out how to save my option changes or re-open important
        > > documents.
        > >
        > > I'd really appreciate some help in this very basic issue, and in
        > > understanding what is causing the problem. Thanks in advance.
        > --
        > Regards ... Alec (buralex@gmail & WinLiveMess - alec.m.burgess@skype)
        >



        [Non-text portions of this message have been removed]
      • ecto
        Thanks, John. That s good advice to remember for other programs as well. I ll also read the other Vista-Windows 7 posts to bring me up to speed. Many thanks,
        Message 3 of 6 , Jan 15, 2013
        • 0 Attachment
          Thanks, John. That's good advice to remember for other programs as well. I'll also read the other Vista-Windows 7 posts to bring me up to speed. Many thanks, again.

          Cheers,
          Joel

          --- In notetab@yahoogroups.com, "John Shotsky" wrote:
          >
          > You can read about how to use NoteTab 7 in Vista-Win7 in the general help section. There are multiple approaches, but
          > the ONE thing you cannot do is have files in C:\Program Files that need to be edited by a program. Generally, Windows
          > will move such edited files to a shadow copy location which is in a hidden folder. You can find it by searching. But, as
          > with all Windows programs, you must run an install to install them, and an uninstall to uninstall them. NoteTab will
          > operate just fine in Vista and Win7, even in the Program Files section, if you simply do a normal install. If you want
          > everything local to a NoteTab folder, as I do, then it can't be installed in Program Files. I have a folder called
          > C:\Programs where I install all programs that aren't explicitly written for Win7.
          >
          > Regards,
          > John
          > RecipeTools Web Site: http://recipetools.gotdns.com/
          >
          > From: notetab@yahoogroups.com [mailto:notetab@yahoogroups.com] On Behalf Of ecto
          > Sent: Tuesday, January 15, 2013 15:22
          > To: notetab@yahoogroups.com
          > Subject: Re: [NTB] Can't get v.7.1/fv to save option changes or re-open open documents
          >
          >
          > Alex, thank you. That was brilliant. I actually didn't transfer my NotePro.ini file from v. 4.95 thinking that that
          > v.7.1 would set up its own .ini file which I could just edit. When I saw that wasn't possible, I tried to copy and paste
          > the old v.4.95 .ini file in the C://Program Files/NoteTab7 directory. Windows Vista would not allow me to do that.
          > Instead, I followed your suggestion. I uninstalled 7.1 and re-installed it to C://NoteTab7. Into that directory I was
          > able to paste the older NotePro.ini file. Now I have all my old settings and open documents.
          >
          > This problem was caused by Windows Vista (Windows 6). I still don't understand why they made it more difficult than
          > necessary, with the permissions feature. I struggled for about a week just to upgrade Adobe Reader from v. 10 to v. 11,
          > following multiple steps and advice from Adobe support.
          >
          > Thank you again, Alex. It's wonderful to get such a fast and helpful response.
          >
          > Cheers,
          > Joel
          >
          > --- In notetab@yahoogroups.com , Alec Burgess wrote:
          > >
          > > Oops .. I just re-read your post. substitute Vista for Win-7 in the
          > > following. :-[
          > >
          > > Your problem is (I'm almost certain) that on Win-7 by default you don't
          > > have permission to write to the Program Files location where you
          > > installed NoteTab. When Notetab is opened, it checks for the existence
          > > of notepro.ini in that folder and if *NOT FOUND* instead puts all the
          > > subfolders for favorites, libraries etc that used to be there in
          > > previous (ie. Notetab 4.95) versions in:
          > > C:\Documents and Settings\Alec\Application Data\NoteTab Pro\NotePro.ini
          > > (on WInXP) and (I think)
          > > C:\Users\ \Application Data\NoteTab Pro\NotePro.ini
          > >
          > > I suspect you just copied your old notetab setup to the Win-7
          > > %progfiles% location after installing it. Correct?
          > > If so, there are a bunch of ways to correct.
          > > Simplest might be to just:
          > > (1) uninstall your current Win-7 Notetab (after making a backup copy
          > > just for safety)
          > > (2) create a new top level folder (say) C:\myProgramFiles (this should
          > > give you write access)
          > > (3) Install Notetab in (say) C:\myProgramFiles\Notetab Pro.
          > > (4) Copy the same control files you copied from your old system to the
          > > Vista laptop.
          > > and finally ...
          > > (5) Run Notetab and verify that favorites, option etc. are now being
          > > saved across program restarts.
          > >
          > >
          > > On 2013-01-15 16:56, ecto wrote:
          > > > This is very frustrating. I have been using Note Tab Pro v.4.95 on my
          > > > older Windows 98 computer for years. I just upgraded to v.7.1 on my
          > > > Windows Vista SP2 Toshiba laptop.
          > > >
          > > > I opened my favorite documents in Note Tab Pro, edited the options,
          > > > and hid the ruler, line numbers, and the clip book to provide maximum
          > > > display space for the documents.
          > > >
          > > > In Options, Reload Open Documents is checked.
          > > >
          > > > However, none of these settings remain saved. Every time I reopen Note
          > > > Tab Pro my previously open documents are closed. They do not even
          > > > appear in the Reopen tab. I again see the ruler, line numbers, and
          > > > clip book. Readme.txt, Readme.otl, and WhatsNew.txt are the only
          > > > documents which appear whenever the program opens.
          > > >
          > > > I can't figure out how to save my option changes or re-open important
          > > > documents.
          > > >
          > > > I'd really appreciate some help in this very basic issue, and in
          > > > understanding what is causing the problem. Thanks in advance.
          > > --
          > > Regards ... Alec (buralex@gmail & WinLiveMess - alec.m.burgess@skype)
          > >
          >
          >
          >
          > [Non-text portions of this message have been removed]
          >
        • John Shotsky
          Uninstall, then reinstall in a new folder outside of C: Program Files, such as C: Programs. Regards, John RecipeTools Web Site:
          Message 4 of 6 , Jan 21, 2013
          • 0 Attachment
            Uninstall, then reinstall in a new folder outside of C:\Program Files, such as C:\Programs.

            Regards,
            John
            RecipeTools Web Site: <http://recipetools.gotdns.com/> http://recipetools.gotdns.com/

            From: notetab@yahoogroups.com [mailto:notetab@yahoogroups.com] On Behalf Of ecto
            Sent: Tuesday, January 15, 2013 13:57
            To: notetab@yahoogroups.com
            Subject: [NTB] Can't get v.7.1/fv to save option changes or re-open open documents


            This is very frustrating. I have been using Note Tab Pro v.4.95 on my older Windows 98 computer for years. I just
            upgraded to v.7.1 on my Windows Vista SP2 Toshiba laptop.

            I opened my favorite documents in Note Tab Pro, edited the options, and hid the ruler, line numbers, and the clip book
            to provide maximum display space for the documents.

            In Options, Reload Open Documents is checked.

            However, none of these settings remain saved. Every time I reopen Note Tab Pro my previously open documents are closed.
            They do not even appear in the Reopen tab. I again see the ruler, line numbers, and clip book. Readme.txt, Readme.otl,
            and WhatsNew.txt are the only documents which appear whenever the program opens.

            I can't figure out how to save my option changes or re-open important documents.

            I'd really appreciate some help in this very basic issue, and in understanding what is causing the problem. Thanks in
            advance.

            Cheers,
            Joel



            [Non-text portions of this message have been removed]
          Your message has been successfully submitted and would be delivered to recipients shortly.