Loading ...
Sorry, an error occurred while loading the content.
 
  • Back
  • About Group

  • Join Group
No activity in last 7 days

Group Description

Welcome to the group. It was formed 27 May 2005. Since then Dick has built a second Nexus Mustang. It has a 3 blade MT propeller, a 20 lbs lighter aluminum undercarriage and metal wheel pants. After that Dick designed and built the Nexus Alar which is a side by side version of the Nexus Mustang. Its first flight was on Sunday 19th May 2013. Drawings for the Nexus Mustang are available from Dick at $400.00 US, see NexusMustang.net for details.

Two possible sources for some parts are:



Contact Details
Peter Carr - Carr Engineered Equipment
123 Aphrasia St
Geelong, Victoria 3220, Australia
Phone/Fax +61 (0)352 213 505
peter.carr123@gmail.com
http://www.engineeredequipment.com.au/aircraft_kit.htm

And

Jim Phillips in Texas +1 832 875-2939

Some parts are available from http://www.mustangaero.com/ (wing spar extrusions, aluminum undercarriage)

Technical data
Performance with fixed pitch Cruise propeller and a Harry Riblett "GA Airfoil"
At 3,000` this combination at full throttle gives 240 Miles per hr.True Air Speed
75% Power approx 2650 RPM. 22 " manifold pressure is 210 MilesTrue.10.5 Gal.PH
70% Power approx 2600 RPM. 21.5 manifold pressure is 200 MilesTrue.9.5 Gal.PH

At 7500 ` Full throttle 2840 RPM. ( 75% power ) 215 -220 Miles per hr..
Take off solo with full fuel 800-900 ` Gross 1100-1200 ` depending on temperature altitude etc. Landing distance is about 1200` Touch down three point 70 MPH half flap.

Group Information

Group Settings

  • This is a restricted group.
  • Attachments are permitted.
  • Members cannot hide email address.
  • Listed in Yahoo Groups directory.
  • Membership requires approval.
  • Messages from new members require approval.
  • All members can post messages.

Message History