Loading ...
Sorry, an error occurred while loading the content.

Re: [new_distillers] Heat element holder

Expand Messages
  • K & J
    The elements I fitted to my keg were ones (like electric kettle elements)that required a hole to be cut in the side low down ...push through from the inside
    Message 1 of 2 , May 29, 2003
    • 0 Attachment
      >
      The elements I fitted to my keg were ones (like electric kettle elements)that required a hole to be cut in the side low down ...push through from the inside and tighten the "nut" over the plug-in socket on the outside...job done...really easy to fit...
       
      cheers Ken Mc
      -------Original Message-------
       
      Date: Thursday, May 29, 2003 04:33:19 AM
      Subject: [new_distillers] Heat element holder
       
      I have my beer keg ( $10 from local beer distributor) and I am about
      to start cutting....
      Before I start I have a quick question, I've read about a few
      different ways to mount the the heating element and was wondering if
      anyone had some pictures of how they did it, and the type of material
      used and how they attached the holder ( TIG welded or some type of
      bolting)

      Thanks

      Jeff



      To unsubscribe from this group, send an email to:
      new_distillers-unsubscribe@yahoogroups.com
      New Distillers group archives are at http://archive.nnytech.net/
      FAQ and other information available at http://homedistiller.org



      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
       
      ____________________________________________________
        IncrediMail - Email has finally evolved - Click Here
    Your message has been successfully submitted and would be delivered to recipients shortly.