Loading ...
Sorry, an error occurred while loading the content.

Re: [new_distillers] needle valves versus ...

Expand Messages
  • SSTOLI123@aol.com
    Speaking of vapor management. How are things going with the new vapor management head? Steve
    Message 1 of 29 , Feb 27 11:20 AM
    • 0 Attachment
      Speaking of vapor management. How are things going with the new vapor management head?

      Steve
    • Bob Bourne
      Steve, 3/8 is it. Maybe I could just send you the money (including shipping) and you could post it to me? My email is bourne@vic.australis.com.au Appreciated.
      Message 2 of 29 , Feb 27 11:38 AM
      • 0 Attachment
        Steve,

        3/8 is it. Maybe I could just send you the money (including shipping) and
        you could post it to me?

        My email is bourne@...

        Appreciated.

        Bob.

        ----- Original Message -----
        From: <SSTOLI123@...>
        To: <new_distillers@yahoogroups.com>
        Sent: Friday, February 28, 2003 6:09 AM
        Subject: Re: [new_distillers] needle valves versus ...


        > What size do you need. The ones around here are 9.52MM or 3/8 of an inch.
        > I have an e-bay account maybe I could put it on there to simplify things.
        I
        > have no Idea what shipping would be on the part but I could chech it out.
        It
        > can't be to much with such a small part.
        >
        > Steve
        >
      • NLG
        Hi :) I am curious! I know there is a difference in the specs for electric between the United States and New Zeland and other countries. In reference to the
        Message 3 of 29 , Feb 27 12:34 PM
        • 0 Attachment
          Hi :)

          I am curious! I know there is a difference in the specs for electric
          between the United States and New Zeland and other countries. In reference
          to the needle velves... Is there a difference between thread size in the
          United States and New Zeland?

          Besides the ovious (money) what other differences are there if any between
          the two countries?

          ----- Original Message -----
          From: "Bob Bourne" <bourne@...>
          To: <new_distillers@yahoogroups.com>
          Sent: Thursday, February 27, 2003 1:58 PM
          Subject: Re: [new_distillers] needle valves versus ...


          > Steve, I was just about to drive 40 miles and pay $66.00 for a needle
          valve
          > just to get it out of the way. But, I hate to be ripped off! A contact
          > address would be good for one at around $5 US - and will mail it.
          >
          > bourne@...
          >
          > Bob.
          > ----- Original Message -----
          > From: <SSTOLI123@...>
          > To: <new_distillers@yahoogroups.com>
          > Sent: Friday, February 28, 2003 5:52 AM
          > Subject: Re: [new_distillers] needle valves versus ...
          >
          >
          > > I think that they are around $5.00 us here. maybe we can send one to you
          > > guys!
          > >
          > > Steve
          > >
          >
          >
          > To unsubscribe from this group, send an email to:
          > new_distillers-unsubscribe@onelist.com
          >
          >
          >
          > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
          >
          >
        • Bob Bourne
          ... reference ... Australia uses the metric system but much of the British Imperial system still happens - centimetres - inches etc. ... Huge. Too huge for me.
          Message 4 of 29 , Feb 27 12:41 PM
          • 0 Attachment
            > Hi :)
            >
            > I am curious! I know there is a difference in the specs for electric
            > between the United States and New Zeland and other countries. In
            reference
            > to the needle velves... Is there a difference between thread size in the
            > United States and New Zeland?

            Australia uses the metric system but much of the British Imperial system
            still happens - centimetres - inches etc.

            > Besides the ovious (money) what other differences are there if any between
            > the two countries?

            Huge. Too huge for me.

            Regards,

            Bob Bourne.
            >
            > ----- Original Message -----
            > From: "Bob Bourne" <bourne@...>
            > To: <new_distillers@yahoogroups.com>
            > Sent: Thursday, February 27, 2003 1:58 PM
            > Subject: Re: [new_distillers] needle valves versus ...
            >
            >
            > > Steve, I was just about to drive 40 miles and pay $66.00 for a needle
            > valve
            > > just to get it out of the way. But, I hate to be ripped off! A contact
            > > address would be good for one at around $5 US - and will mail it.
            > >
            > > bourne@...
            > >
            > > Bob.
            > > ----- Original Message -----
            > > From: <SSTOLI123@...>
            > > To: <new_distillers@yahoogroups.com>
            > > Sent: Friday, February 28, 2003 5:52 AM
            > > Subject: Re: [new_distillers] needle valves versus ...
            > >
            > >
            > > > I think that they are around $5.00 us here. maybe we can send one to
            you
            > > > guys!
            > > >
            > > > Steve
            > > >
            > >
            > >
            > > To unsubscribe from this group, send an email to:
            > > new_distillers-unsubscribe@onelist.com
            > >
            > >
            > >
            > > Your use of Yahoo! Groups is subject to
            http://docs.yahoo.com/info/terms/
            > >
            > >
            >
            >
            >
            > To unsubscribe from this group, send an email to:
            > new_distillers-unsubscribe@onelist.com
            >
            >
            >
            > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
            >
            >
          • NLG
            To clarify... If I were to send a 3/8 inch needle velve from the U.S. to someone in Australia...Would/could the person in Australia buy a piece of pipe from a
            Message 5 of 29 , Feb 27 12:49 PM
            • 0 Attachment
              To clarify... If I were to send a 3/8 inch needle velve from the U.S. to
              someone in Australia...Would/could the person in Australia buy a piece of
              pipe from a local hardware store that would screw into the thread of the
              velve I sent?


              ----- Original Message -----
              From: "Bob Bourne" <bourne@...>
              To: <new_distillers@yahoogroups.com>
              Sent: Thursday, February 27, 2003 3:41 PM
              Subject: Re: [new_distillers] needle valves versus ...


              > > Hi :)
              > >
              > > I am curious! I know there is a difference in the specs for electric
              > > between the United States and New Zeland and other countries. In
              > reference
              > > to the needle velves... Is there a difference between thread size in the
              > > United States and New Zeland?
              >
              > Australia uses the metric system but much of the British Imperial system
              > still happens - centimetres - inches etc.
              >
              > > Besides the ovious (money) what other differences are there if any
              between
              > > the two countries?
              >
              > Huge. Too huge for me.
              >
              > Regards,
              >
              > Bob Bourne.
              > >
              > > ----- Original Message -----
              > > From: "Bob Bourne" <bourne@...>
              > > To: <new_distillers@yahoogroups.com>
              > > Sent: Thursday, February 27, 2003 1:58 PM
              > > Subject: Re: [new_distillers] needle valves versus ...
              > >
              > >
              > > > Steve, I was just about to drive 40 miles and pay $66.00 for a needle
              > > valve
              > > > just to get it out of the way. But, I hate to be ripped off! A contact
              > > > address would be good for one at around $5 US - and will mail it.
              > > >
              > > > bourne@...
              > > >
              > > > Bob.
              > > > ----- Original Message -----
              > > > From: <SSTOLI123@...>
              > > > To: <new_distillers@yahoogroups.com>
              > > > Sent: Friday, February 28, 2003 5:52 AM
              > > > Subject: Re: [new_distillers] needle valves versus ...
              > > >
              > > >
              > > > > I think that they are around $5.00 us here. maybe we can send one to
              > you
              > > > > guys!
              > > > >
              > > > > Steve
              > > > >
              > > >
              > > >
              > > > To unsubscribe from this group, send an email to:
              > > > new_distillers-unsubscribe@onelist.com
              > > >
              > > >
              > > >
              > > > Your use of Yahoo! Groups is subject to
              > http://docs.yahoo.com/info/terms/
              > > >
              > > >
              > >
              > >
              > >
              > > To unsubscribe from this group, send an email to:
              > > new_distillers-unsubscribe@onelist.com
              > >
              > >
              > >
              > > Your use of Yahoo! Groups is subject to
              http://docs.yahoo.com/info/terms/
              > >
              > >
              >
              >
              >
              > To unsubscribe from this group, send an email to:
              > new_distillers-unsubscribe@onelist.com
              >
              >
              >
              > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
              >
              >
              >
            • Bob Bourne
              Sure could. ... From: NLG To: Sent: Friday, February 28, 2003 7:49 AM Subject: Re: [new_distillers]
              Message 6 of 29 , Feb 27 12:54 PM
              • 0 Attachment
                Sure could.


                ----- Original Message -----
                From: "NLG" <ngezik@...>
                To: <new_distillers@yahoogroups.com>
                Sent: Friday, February 28, 2003 7:49 AM
                Subject: Re: [new_distillers] needle valves versus ...


                > To clarify... If I were to send a 3/8 inch needle velve from the U.S. to
                > someone in Australia...Would/could the person in Australia buy a piece of
                > pipe from a local hardware store that would screw into the thread of the
                > velve I sent?
                >
                >
                > ----- Original Message -----
                > From: "Bob Bourne" <bourne@...>
                > To: <new_distillers@yahoogroups.com>
                > Sent: Thursday, February 27, 2003 3:41 PM
                > Subject: Re: [new_distillers] needle valves versus ...
                >
                >
                > > > Hi :)
                > > >
                > > > I am curious! I know there is a difference in the specs for electric
                > > > between the United States and New Zeland and other countries. In
                > > reference
                > > > to the needle velves... Is there a difference between thread size in
                the
                > > > United States and New Zeland?
                > >
                > > Australia uses the metric system but much of the British Imperial system
                > > still happens - centimetres - inches etc.
                > >
                > > > Besides the ovious (money) what other differences are there if any
                > between
                > > > the two countries?
                > >
                > > Huge. Too huge for me.
                > >
                > > Regards,
                > >
                > > Bob Bourne.
                > > >
                > > > ----- Original Message -----
                > > > From: "Bob Bourne" <bourne@...>
                > > > To: <new_distillers@yahoogroups.com>
                > > > Sent: Thursday, February 27, 2003 1:58 PM
                > > > Subject: Re: [new_distillers] needle valves versus ...
                > > >
                > > >
                > > > > Steve, I was just about to drive 40 miles and pay $66.00 for a
                needle
                > > > valve
                > > > > just to get it out of the way. But, I hate to be ripped off! A
                contact
                > > > > address would be good for one at around $5 US - and will mail it.
                > > > >
                > > > > bourne@...
                > > > >
                > > > > Bob.
                > > > > ----- Original Message -----
                > > > > From: <SSTOLI123@...>
                > > > > To: <new_distillers@yahoogroups.com>
                > > > > Sent: Friday, February 28, 2003 5:52 AM
                > > > > Subject: Re: [new_distillers] needle valves versus ...
                > > > >
                > > > >
                > > > > > I think that they are around $5.00 us here. maybe we can send one
                to
                > > you
                > > > > > guys!
                > > > > >
                > > > > > Steve
                > > > > >
                > > > >
                > > > >
                > > > > To unsubscribe from this group, send an email to:
                > > > > new_distillers-unsubscribe@onelist.com
                > > > >
                > > > >
                > > > >
                > > > > Your use of Yahoo! Groups is subject to
                > > http://docs.yahoo.com/info/terms/
                > > > >
                > > > >
                > > >
                > > >
                > > >
                > > > To unsubscribe from this group, send an email to:
                > > > new_distillers-unsubscribe@onelist.com
                > > >
                > > >
                > > >
                > > > Your use of Yahoo! Groups is subject to
                > http://docs.yahoo.com/info/terms/
                > > >
                > > >
                > >
                > >
                > >
                > > To unsubscribe from this group, send an email to:
                > > new_distillers-unsubscribe@onelist.com
                > >
                > >
                > >
                > > Your use of Yahoo! Groups is subject to
                http://docs.yahoo.com/info/terms/
                > >
                > >
                > >
                >
                >
                > To unsubscribe from this group, send an email to:
                > new_distillers-unsubscribe@onelist.com
                >
                >
                >
                > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
                >
                >
              • Michael <god@perthmail.com>
                Even in America most plumbing fittings are BSP, meaning British Standard Pipe. This uses an imperial thread, UNC, meaning Unified National Coarse (thread).
                Message 7 of 29 , Feb 27 3:28 PM
                • 0 Attachment
                  Even in America most plumbing fittings are BSP, meaning British
                  Standard Pipe. This uses an imperial thread, UNC, meaning Unified
                  National Coarse (thread). You get BSP in parallel thread, BSPP or a
                  tapered thread, BSPT. BSP is measured from the inside diameter of
                  the pipe, but the thread size is actually the thread on the outside
                  of the pipe. Thus a 3/8" BSP thread is actually about a 1/2" UNC
                  thread.

                  There are two other forms of piping threads as well, Metric and NPT.
                  I can't remember exactly which one gas threads are but I believe they
                  are a left hand BSPT threads. Left hand meaning it needs to be
                  turned the opposite direction. Metric tends to be used for
                  specialised applications so you will rarely see it. NPT is rarely
                  used because the threads don't seal as easily and have a lower thread
                  strength.

                  So any valves you send over should not be a problem unless they are
                  specialty items. Even then, adapters and fittings are readily
                  available. Fluidline are a good bunch in Australia to try for them.
                  They would probably be good for the valves too... Hhmmm...

                  Michael

                  --- In new_distillers@yahoogroups.com, "NLG" <ngezik@p...> wrote:
                  > Hi :)
                  >
                  > I am curious! I know there is a difference in the specs for
                  > electric between the United States and New Zeland and other
                  > countries. In reference to the needle velves... Is there a
                  > difference between thread size in the United States and New Zeland?
                  >
                  > Besides the ovious (money) what other differences are there if any
                  > between the two countries?
                • Robert N
                  Hi Bob, are we on the same page here, you are talking about a ¼” BSP Brass needle valve? Admittedly, I had to look around and ask at several plumbing stores
                  Message 8 of 29 , Feb 27 4:34 PM
                  • 0 Attachment

                    Hi Bob, are we on the same page here, you are talking about a ¼” BSP Brass needle valve? Admittedly, I had to look around and ask at several plumbing stores of where I could find such a fitting. Head over to a store near the industrial area in town, mainly because ¼” BSP these days is mainly used on fridges and brake lines etc.

                     

                    I purchased mine from

                     

                    Tony Powell Plumbing Supplies

                    776 Beaudesert Road

                    Salisbury, Brisbane QLD 4108

                    Australia

                    (07) 3274-1480

                     

                    Give them a call and maybe they can put you onto someone in Melbourne that sells them too. Alternatively, they would mail one to you, from memory mine only cost me $5~10 Au whereas a SS one would have cost $45.

                     

                    If you are after Stainless Steel fittings then try www.midwaymetals.com.au/ they have a branch in Dandenong, give them a ring to find a local source for all the Stainless Steel fittings you can imagine. If you have no success there then try Atlas metals.

                     

                    Hope this helps!

                     

                     

                    Yours in Spirit

                     

                     

                    Robert

                    -----Original Message-----
                    From: Bob Bourne [mailto:bourne@...]
                    Sent
                    :
                    Friday, February 28, 2003 6:54 AM
                    To: new_distillers@yahoogroups.com
                    Subject: Re: [new_distillers] needle valves versus ...

                     

                    Sure could.


                    ----- Original Message -----
                    From: "NLG" <ngezik@...>
                    To: <new_distillers@yahoogroups.com>
                    Sent:
                    Friday, February 28, 2003 7:49 AM
                    Subject: Re: [new_distillers] needle valves versus ...


                    > To clarify... If I were to send a 3/8 inch needle velve from the
                    U.S. to
                    > someone in Australia...Would/could the person in
                    Australia buy a piece of
                    > pipe from a local hardware store that would screw into the thread of the
                    > velve I sent?
                    >
                    >
                    > ----- Original Message -----
                    > From: "Bob Bourne" <bourne@...>
                    > To: <new_distillers@yahoogroups.com>
                    > Sent:
                    Thursday, February 27, 2003 3:41 PM
                    > Subject: Re: [new_distillers] needle valves versus ...
                    >
                    >
                    > > > Hi :)
                    > > >
                    > > > I am curious!  I know there is a difference in the specs for electric
                    > > > between the
                    United States and New Zeland and other countries.  In
                    > > reference
                    > > > to the needle velves... Is there a difference between thread size in
                    the
                    > > >
                    United States and New Zeland?
                    > >
                    > >
                    Australia uses the metric system but much of the British Imperial system
                    > > still happens - centimetres - inches etc.
                    > >
                    > > > Besides the ovious (money) what other differences are there if any
                    > between
                    > > > the two countries?
                    > >
                    > > Huge. Too huge for me.
                    > >
                    > > Regards,
                    > >
                    > > Bob Bourne.
                    > > >
                    > > > ----- Original Message -----
                    > > > From: "Bob Bourne" <bourne@...>
                    > > > To: <new_distillers@yahoogroups.com>
                    > > > Sent: Thursday, February 27, 2003 1:58 PM
                    > > > Subject: Re: [new_distillers] needle valves versus ...
                    > > >
                    > > >
                    > > > > Steve, I was just about to drive 40 miles and pay $66.00 for a
                    needle
                    > > > valve
                    > > > > just to get it out of the way. But, I hate to be ripped off! A
                    contact
                    > > > > address would be good for one at  around $5 US  - and  will mail it.
                    > > > >
                    > > > > bourne@...
                    > > > >
                    > > > > Bob.
                    > > > > ----- Original Message -----
                    > > > > From: <SSTOLI123@...>
                    > > > > To: <new_distillers@yahoogroups.com>
                    > > > > Sent: Friday, February 28, 2003 5:52 AM
                    > > > > Subject: Re: [new_distillers] needle valves versus ...
                    > > > >
                    > > > >
                    > > > > > I think that they are around $5.00 us here. maybe we can send one
                    to
                    > > you
                    > > > > > guys!
                    > > > > >
                    > > > > > Steve
                    > > > > >
                    > > > >
                    > > > >
                    > > > > To unsubscribe from this group, send an email to:
                    > > > > new_distillers-unsubscribe@onelist.com
                    > > > >
                    > > > >
                    > > > >
                    > > > > Your use of Yahoo! Groups is subject to
                    > > http://docs.yahoo.com/info/terms/
                    > > > >
                    > > > >
                    > > >
                    > > >
                    > > >
                    > > > To unsubscribe from this group, send an email to:
                    > > > new_distillers-unsubscribe@onelist.com
                    > > >
                    > > >
                    > > >
                    > > > Your use of Yahoo! Groups is subject to
                    > http://docs.yahoo.com/info/terms/
                    > > >
                    > > >
                    > >
                    > >
                    > >
                    > > To unsubscribe from this group, send an email to:
                    > > new_distillers-unsubscribe@onelist.com
                    > >
                    > >
                    > >
                    > > Your use of Yahoo! Groups is subject to
                    http://docs.yahoo.com/info/terms/
                    > >
                    > >
                    > >
                    >
                    >
                    > To unsubscribe from this group, send an email to:
                    > new_distillers-unsubscribe@onelist.com
                    >
                    >
                    >
                    > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
                    >
                    >



                    To unsubscribe from this group, send an email to:
                    new_distillers-unsubscribe@onelist.com



                    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
                  • Bob Bourne
                    Hi Robert, I was on about 3/8 but I don t see why 1/4 wouldn t do. I ll check out your sources. Thanks. BB. ... From: Robert N To:
                    Message 9 of 29 , Feb 27 4:39 PM
                    • 0 Attachment
                      Hi Robert,

                      I was on about 3/8 but I don't see why 1/4 wouldn't do. I'll check out your
                      sources. Thanks.

                      BB.
                      ----- Original Message -----
                      From: "Robert N" <dinks_c@...>
                      To: <new_distillers@yahoogroups.com>
                      Cc: <bourne@...>
                      Sent: Friday, February 28, 2003 11:34 AM
                      Subject: RE: [new_distillers] needle valves versus ...


                      Hi Bob, are we on the same page here, you are talking about a ¼" BSP
                      Brass needle valve? Admittedly, I had to look around and ask at several
                      plumbing stores of where I could find such a fitting. Head over to a
                      store near the industrial area in town, mainly because ¼" BSP these days
                      is mainly used on fridges and brake lines etc.

                      I purchased mine from

                      Tony Powell Plumbing Supplies
                      776 Beaudesert Road
                      Salisbury, Brisbane QLD 4108
                      Australia
                      (07) 3274-1480

                      Give them a call and maybe they can put you onto someone in Melbourne
                      that sells them too. Alternatively, they would mail one to you, from
                      memory mine only cost me $5~10 Au whereas a SS one would have cost $45.

                      If you are after Stainless Steel fittings then try
                      www.midwaymetals.com.au/ they have a branch in Dandenong, give them a
                      ring to find a local source for all the Stainless Steel fittings you can
                      imagine. If you have no success there then try Atlas metals.

                      Hope this helps!


                      Yours in Spirit


                      Robert
                      -----Original Message-----
                      From: Bob Bourne [mailto:bourne@...]
                      Sent: Friday, February 28, 2003 6:54 AM
                      To: new_distillers@yahoogroups.com
                      Subject: Re: [new_distillers] needle valves versus ...

                      Sure could.


                      ----- Original Message -----
                      From: "NLG" <ngezik@...>
                      To: <new_distillers@yahoogroups.com>
                      Sent: Friday, February 28, 2003 7:49 AM
                      Subject: Re: [new_distillers] needle valves versus ...


                      > To clarify... If I were to send a 3/8 inch needle velve from the U.S.
                      to
                      > someone in Australia...Would/could the person in Australia buy a piece
                      of
                      > pipe from a local hardware store that would screw into the thread of
                      the
                      > velve I sent?
                      >
                      >
                      > ----- Original Message -----
                      > From: "Bob Bourne" <bourne@...>
                      > To: <new_distillers@yahoogroups.com>
                      > Sent: Thursday, February 27, 2003 3:41 PM
                      > Subject: Re: [new_distillers] needle valves versus ...
                      >
                      >
                      > > > Hi :)
                      > > >
                      > > > I am curious! I know there is a difference in the specs for
                      electric
                      > > > between the United States and New Zeland and other countries. In
                      > > reference
                      > > > to the needle velves... Is there a difference between thread size
                      in
                      the
                      > > > United States and New Zeland?
                      > >
                      > > Australia uses the metric system but much of the British Imperial
                      system
                      > > still happens - centimetres - inches etc.
                      > >
                      > > > Besides the ovious (money) what other differences are there if any
                      > between
                      > > > the two countries?
                      > >
                      > > Huge. Too huge for me.
                      > >
                      > > Regards,
                      > >
                      > > Bob Bourne.
                      > > >
                      > > > ----- Original Message -----
                      > > > From: "Bob Bourne" <bourne@...>
                      > > > To: <new_distillers@yahoogroups.com>
                      > > > Sent: Thursday, February 27, 2003 1:58 PM
                      > > > Subject: Re: [new_distillers] needle valves versus ...
                      > > >
                      > > >
                      > > > > Steve, I was just about to drive 40 miles and pay $66.00 for a
                      needle
                      > > > valve
                      > > > > just to get it out of the way. But, I hate to be ripped off! A
                      contact
                      > > > > address would be good for one at around $5 US - and will mail
                      it.
                      > > > >
                      > > > > bourne@...
                      > > > >
                      > > > > Bob.
                      > > > > ----- Original Message -----
                      > > > > From: <SSTOLI123@...>
                      > > > > To: <new_distillers@yahoogroups.com>
                      > > > > Sent: Friday, February 28, 2003 5:52 AM
                      > > > > Subject: Re: [new_distillers] needle valves versus ...
                      > > > >
                      > > > >
                      > > > > > I think that they are around $5.00 us here. maybe we can send
                      one
                      to
                      > > you
                      > > > > > guys!
                      > > > > >
                      > > > > > Steve
                      > > > > >
                      > > > >
                      > > > >
                      > > > > To unsubscribe from this group, send an email to:
                      > > > > new_distillers-unsubscribe@onelist.com
                      > > > >
                      > > > >
                      > > > >
                      > > > > Your use of Yahoo! Groups is subject to
                      > > http://docs.yahoo.com/info/terms/
                      > > > >
                      > > > >
                      > > >
                      > > >
                      > > >
                      > > > To unsubscribe from this group, send an email to:
                      > > > new_distillers-unsubscribe@onelist.com
                      > > >
                      > > >
                      > > >
                      > > > Your use of Yahoo! Groups is subject to
                      > http://docs.yahoo.com/info/terms/
                      > > >
                      > > >
                      > >
                      > >
                      > >
                      > > To unsubscribe from this group, send an email to:
                      > > new_distillers-unsubscribe@onelist.com
                      > >
                      > >
                      > >
                      > > Your use of Yahoo! Groups is subject to
                      http://docs.yahoo.com/info/terms/
                      > >
                      > >
                      > >
                      >
                      >
                      > To unsubscribe from this group, send an email to:
                      > new_distillers-unsubscribe@onelist.com
                      >
                      >
                      >
                      > Your use of Yahoo! Groups is subject to
                      http://docs.yahoo.com/info/terms/
                      >
                      >





                      Yahoo! Groups Sponsor


                      ADVERTISEMENT

                      <http://rd.yahoo.com/M=246920.2960106.4328965.2848452/D=egroupweb/S=1705
                      041694:HM/A=1464858/R=0/*http:/www.gotomypc.com/u/tr/yh/cpm/grp/300_Cquo
                      _1/g22lp?Target=mm/g22lp.tmpl>


                      <http://us.adserver.yahoo.com/l?M=246920.2960106.4328965.2848452/D=egrou
                      pmail/S=:HM/A=1464858/rand=635758767>

                      To unsubscribe from this group, send an email to:
                      new_distillers-unsubscribe@onelist.com



                      Your use of Yahoo! Groups is subject to the Yahoo!
                      <http://docs.yahoo.com/info/terms/> Terms of Service.
                    • Robert N
                      Hi Bob, you could always give a hydraulic hose fitter a try, there are plenty of mobile vans running around. Try the yellow pages under hydraulic supplies.
                      Message 10 of 29 , Feb 27 4:48 PM
                      • 0 Attachment

                        Hi Bob, you could always give a hydraulic hose fitter a try, there are plenty of mobile vans running around. Try the yellow pages under hydraulic supplies.

                         

                        Yours in Spirit

                         

                         

                        Robert

                        -----Original Message-----
                        From: Bob Bourne [mailto:bourne@...]
                        Sent
                        :
                        Friday, February 28, 2003 10:39 AM
                        To: new_distillers@yahoogroups.com
                        Subject: Re: [new_distillers] needle valves versus ...

                         

                        Hi Robert,

                        I was on about 3/8 but I don't see why 1/4 wouldn't do. I'll check out your
                        sources. Thanks.

                        BB.
                        ----- Original Message -----
                        From: "Robert N" <dinks_c@...>
                        To: <new_distillers@yahoogroups.com>
                        Cc: <bourne@...>
                        Sent:
                        Friday, February 28, 2003 11:34 AM
                        Subject: RE: [new_distillers] needle valves versus ...


                        Hi Bob, are we on the same page here, you are talking about a ¼" BSP
                        Brass needle valve? Admittedly, I had to look around and ask at several
                        plumbing stores of where I could find such a fitting. Head over to a
                        store near the industrial area in town, mainly because ¼" BSP these days
                        is mainly used on fridges and brake lines etc.

                        I purchased mine from

                        Tony Powell Plumbing Supplies
                        776 Beaudesert Road
                        Salisbury, Brisbane QLD 4108
                        Australia
                        (07) 3274-1480

                        Give them a call and maybe they can put you onto someone in
                        Melbourne
                        that sells them too. Alternatively, they would mail one to you, from
                        memory mine only cost me $5~10 Au whereas a SS one would have cost $45.

                        If you are after Stainless Steel fittings then try
                        www.midwaymetals.com.au/ they have a branch in Dandenong, give them a
                        ring to find a local source for all the Stainless Steel fittings you can
                        imagine. If you have no success there then try Atlas metals.

                        Hope this helps!


                        Yours in Spirit


                        Robert
                        -----Original Message-----
                        From: Bob Bourne [mailto:bourne@...]
                        Sent:
                        Friday, February 28, 2003 6:54 AM
                        To: new_distillers@yahoogroups.com
                        Subject: Re: [new_distillers] needle valves versus ...

                        Sure could.


                        ----- Original Message -----
                        From: "NLG" <ngezik@...>
                        To: <new_distillers@yahoogroups.com>
                        Sent:
                        Friday, February 28, 2003 7:49 AM
                        Subject: Re: [new_distillers] needle valves versus ...


                        > To clarify... If I were to send a 3/8 inch needle velve from the
                        U.S.
                        to
                        > someone in Australia...Would/could the person in
                        Australia buy a piece
                        of
                        > pipe from a local hardware store that would screw into the thread of
                        the
                        > velve I sent?
                        >
                        >
                        > ----- Original Message -----
                        > From: "Bob Bourne" <bourne@...>
                        > To: <new_distillers@yahoogroups.com>
                        > Sent:
                        Thursday, February 27, 2003 3:41 PM
                        > Subject: Re: [new_distillers] needle valves versus ...
                        >
                        >
                        > > > Hi :)
                        > > >
                        > > > I am curious!  I know there is a difference in the specs for
                        electric
                        > > > between the
                        United States and New Zeland and other countries.  In
                        > > reference
                        > > > to the needle velves... Is there a difference between thread size
                        in
                        the
                        > > >
                        United States and New Zeland?
                        > >
                        > >
                        Australia uses the metric system but much of the British Imperial
                        system
                        > > still happens - centimetres - inches etc.
                        > >
                        > > > Besides the ovious (money) what other differences are there if any
                        > between
                        > > > the two countries?
                        > >
                        > > Huge. Too huge for me.
                        > >
                        > > Regards,
                        > >
                        > > Bob Bourne.
                        > > >
                        > > > ----- Original Message -----
                        > > > From: "Bob Bourne" <bourne@...>
                        > > > To: <new_distillers@yahoogroups.com>
                        > > > Sent:
                        Thursday, February 27, 2003 1:58 PM
                        > > > Subject: Re: [new_distillers] needle valves versus ...
                        > > >
                        > > >
                        > > > > Steve, I was just about to drive 40 miles and pay $66.00 for a
                        needle
                        > > > valve
                        > > > > just to get it out of the way. But, I hate to be ripped off! A
                        contact
                        > > > > address would be good for one at  around $5 US  - and  will mail
                        it.
                        > > > >
                        > > > > bourne@...
                        > > > >
                        > > > > Bob.
                        > > > > ----- Original Message -----
                        > > > > From: <SSTOLI123@...>
                        > > > > To: <new_distillers@yahoogroups.com>
                        > > > > Sent:
                        Friday, February 28, 2003 5:52 AM
                        > > > > Subject: Re: [new_distillers] needle valves versus ...
                        > > > >
                        > > > >
                        > > > > > I think that they are around $5.00 us here. maybe we can send
                        one
                        to
                        > > you
                        > > > > > guys!
                        > > > > >
                        > > > > > Steve
                        > > > > >
                        > > > >
                        > > > >
                        > > > > To unsubscribe from this group, send an email to:
                        > > > > new_distillers-unsubscribe@onelist.com
                        > > > >
                        > > > >
                        > > > >
                        > > > > Your use of Yahoo! Groups is subject to
                        > > http://docs.yahoo.com/info/terms/
                        > > > >
                        > > > >
                        > > >
                        > > >
                        > > >
                        > > > To unsubscribe from this group, send an email to:
                        > > > new_distillers-unsubscribe@onelist.com
                        > > >
                        > > >
                        > > >
                        > > > Your use of Yahoo! Groups is subject to
                        > http://docs.yahoo.com/info/terms/
                        > > >
                        > > >
                        > >
                        > >
                        > >
                        > > To unsubscribe from this group, send an email to:
                        > > new_distillers-unsubscribe@onelist.com
                        > >
                        > >
                        > >
                        > > Your use of Yahoo! Groups is subject to
                        http://docs.yahoo.com/info/terms/
                        > >
                        > >
                        > >
                        >
                        >
                        > To unsubscribe from this group, send an email to:
                        > new_distillers-unsubscribe@onelist.com
                        >
                        >
                        >
                        > Your use of Yahoo! Groups is subject to
                        http://docs.yahoo.com/info/terms/
                        >
                        >





                        Yahoo! Groups Sponsor


                        ADVERTISEMENT

                        <http://rd.yahoo.com/M=246920.2960106.4328965.2848452/D=egroupweb/S=1705
                        041694:HM/A=1464858/R=0/*http:/www.gotomypc.com/u/tr/yh/cpm/grp/300_Cquo
                        _1/g22lp?Target=mm/g22lp.tmpl>


                        <http://us.adserver.yahoo.com/l?M=246920.2960106.4328965.2848452/D=egrou
                        pmail/S=:HM/A=1464858/rand=635758767>

                        To unsubscribe from this group, send an email to:
                        new_distillers-unsubscribe@onelist.com



                        Your use of Yahoo! Groups is subject to the Yahoo!
                        <http://docs.yahoo.com/info/terms/>  Terms of Service.




                        To unsubscribe from this group, send an email to:
                        new_distillers-unsubscribe@onelist.com



                        Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
                      • Aaron Pelly
                        I got mine as a replacement flow control valve for an in-line water filter. Just asked at my local hardware shop. ... From: Robert N
                        Message 11 of 29 , Feb 27 5:06 PM
                        • 0 Attachment
                          I got mine as a replacement flow control valve for an in-line water filter. Just asked at my local hardware shop.
                           
                          -----Original Message-----
                          From: Robert N [mailto:dinks_c@...]
                          Sent: 28 February 2003 13:34
                          To: new_distillers@yahoogroups.com
                          Cc: bourne@...
                          Subject: RE: [new_distillers] needle valves versus ...

                          Hi Bob, are we on the same page here, you are talking about a ¼" BSP Brass needle valve? Admittedly, I had to look around and ask at several plumbing stores of where I could find such a fitting. Head over to a store near the industrial area in town, mainly because ¼" BSP these days is mainly used on fridges and brake lines etc.

                           

                          I purchased mine from

                           

                          Tony Powell Plumbing Supplies

                          776 Beaudesert Road

                          Salisbury, Brisbane QLD 4108

                          Australia

                          (07) 3274-1480

                           

                          Give them a call and maybe they can put you onto someone in Melbourne that sells them too. Alternatively, they would mail one to you, from memory mine only cost me $5~10 Au whereas a SS one would have cost $45.

                           

                          If you are after Stainless Steel fittings then try www.midwaymetals.com.au/ they have a branch in Dandenong, give them a ring to find a local source for all the Stainless Steel fittings you can imagine. If you have no success there then try Atlas metals.

                           

                          Hope this helps!

                           

                           

                          Yours in Spirit

                           

                           

                          Robert

                          -----Original Message-----
                          From: Bob Bourne [mailto:bourne@...]
                          Sent
                          :
                          Friday, February 28, 2003 6:54 AM
                          To: new_distillers@yahoogroups.com
                          Subject: Re: [new_distillers] needle valves versus ...

                           

                          Sure could.


                          ----- Original Message -----
                          From: "NLG" <ngezik@...>
                          To: <new_distillers@yahoogroups.com>
                          Sent:
                          Friday, February 28, 2003 7:49 AM
                          Subject: Re: [new_distillers] needle valves versus ...


                          > To clarify... If I were to send a 3/8 inch needle velve from the
                          U.S. to
                          > someone in Australia...Would/could the person in
                          Australia buy a piece of
                          > pipe from a local hardware store that would screw into the thread of the
                          > velve I sent?
                          >
                          >
                          > ----- Original Message -----
                          > From: "Bob Bourne" <bourne@...>
                          > To: <new_distillers@yahoogroups.com>
                          > Sent:
                          Thursday, February 27, 2003 3:41 PM
                          > Subject: Re: [new_distillers] needle valves versus ...
                          >
                          >
                          > > > Hi :)
                          > > >
                          > > > I am curious!  I know there is a difference in the specs for electric
                          > > > between the
                          United States and New Zeland and other countries.  In
                          > > reference
                          > > > to the needle velves... Is there a difference between thread size in
                          the
                          > > >
                          United States and New Zeland?
                          > >
                          > >
                          Australia uses the metric system but much of the British Imperial system
                          > > still happens - centimetres - inches etc.
                          > >
                          > > > Besides the ovious (money) what other differences are there if any
                          > between
                          > > > the two countries?
                          > >
                          > > Huge. Too huge for me.
                          > >
                          > > Regards,
                          > >
                          > > Bob Bourne.
                          > > >
                          > > > ----- Original Message -----
                          > > > From: "Bob Bourne" <bourne@...>
                          > > > To: <new_distillers@yahoogroups.com>
                          > > > Sent: Thursday, February 27, 2003 1:58 PM
                          > > > Subject: Re: [new_distillers] needle valves versus ...
                          > > >
                          > > >
                          > > > > Steve, I was just about to drive 40 miles and pay $66.00 for a
                          needle
                          > > > valve
                          > > > > just to get it out of the way. But, I hate to be ripped off! A
                          contact
                          > > > > address would be good for one at  around $5 US  - and  will mail it.
                          > > > >
                          > > > > bourne@...
                          > > > >
                          > > > > Bob.
                          > > > > ----- Original Message -----
                          > > > > From: <SSTOLI123@...>
                          > > > > To: <new_distillers@yahoogroups.com>
                          > > > > Sent: Friday, February 28, 2003 5:52 AM
                          > > > > Subject: Re: [new_distillers] needle valves versus ...
                          > > > >
                          > > > >
                          > > > > > I think that they are around $5.00 us here. maybe we can send one
                          to
                          > > you
                          > > > > > guys!
                          > > > > >
                          > > > > > Steve
                          > > > > >
                          > > > >
                          > > > >
                          > > > > To unsubscribe from this group, send an email to:
                          > > > > new_distillers-unsubscribe@onelist.com
                          > > > >
                          > > > >
                          > > > >
                          > > > > Your use of Yahoo! Groups is subject to
                          > > http://docs.yahoo.com/info/terms/
                          > > > >
                          > > > >
                          > > >
                          > > >
                          > > >
                          > > > To unsubscribe from this group, send an email to:
                          > > > new_distillers-unsubscribe@onelist.com
                          > > >
                          > > >
                          > > >
                          > > > Your use of Yahoo! Groups is subject to
                          > http://docs.yahoo.com/info/terms/
                          > > >
                          > > >
                          > >
                          > >
                          > >
                          > > To unsubscribe from this group, send an email to:
                          > > new_distillers-unsubscribe@onelist.com
                          > >
                          > >
                          > >
                          > > Your use of Yahoo! Groups is subject to
                          http://docs.yahoo.com/info/terms/
                          > >
                          > >
                          > >
                          >
                          >
                          > To unsubscribe from this group, send an email to:
                          > new_distillers-unsubscribe@onelist.com
                          >
                          >
                          >
                          > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
                          >
                          >



                          To unsubscribe from this group, send an email to:
                          new_distillers-unsubscribe@onelist.com



                          Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




                          To unsubscribe from this group, send an email to:
                          new_distillers-unsubscribe@onelist.com



                          Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
                        • Harley Daschund
                          I work for a MAJOR mfg...as a Tool and Die Master...if you have a problem with metric/SAE threads,I can supply you with USED (not worn out,very suitable for
                          Message 12 of 29 , Feb 27 6:53 PM
                          • 0 Attachment
                            I work for a MAJOR mfg...as a Tool and Die Master...if you have a problem
                            with metric/SAE threads,I can supply you with USED (not worn out,very
                            suitable for thinner metal apps) SAE taps...you pay $1(US) + S&H ....limited
                            to 1" or smaller...:>)






                            >From: "NLG" <ngezik@...>
                            >Reply-To: new_distillers@yahoogroups.com
                            >To: <new_distillers@yahoogroups.com>
                            >Subject: Re: [new_distillers] needle valves versus ...
                            >Date: Thu, 27 Feb 2003 15:34:01 -0500
                            >
                            >Hi :)
                            >
                            >I am curious! I know there is a difference in the specs for electric
                            >between the United States and New Zeland and other countries. In reference
                            >to the needle velves... Is there a difference between thread size in the
                            >United States and New Zeland?
                            >
                            >Besides the ovious (money) what other differences are there if any between
                            >the two countries?
                            >
                            >----- Original Message -----
                            >From: "Bob Bourne" <bourne@...>
                            >To: <new_distillers@yahoogroups.com>
                            >Sent: Thursday, February 27, 2003 1:58 PM
                            >Subject: Re: [new_distillers] needle valves versus ...
                            >
                            >
                            > > Steve, I was just about to drive 40 miles and pay $66.00 for a needle
                            >valve
                            > > just to get it out of the way. But, I hate to be ripped off! A contact
                            > > address would be good for one at around $5 US - and will mail it.
                            > >
                            > > bourne@...
                            > >
                            > > Bob.
                            > > ----- Original Message -----
                            > > From: <SSTOLI123@...>
                            > > To: <new_distillers@yahoogroups.com>
                            > > Sent: Friday, February 28, 2003 5:52 AM
                            > > Subject: Re: [new_distillers] needle valves versus ...
                            > >
                            > >
                            > > > I think that they are around $5.00 us here. maybe we can send one to
                            >you
                            > > > guys!
                            > > >
                            > > > Steve
                            > > >
                            > >
                            > >
                            > > To unsubscribe from this group, send an email to:
                            > > new_distillers-unsubscribe@onelist.com
                            > >
                            > >
                            > >
                            > > Your use of Yahoo! Groups is subject to
                            >http://docs.yahoo.com/info/terms/
                            > >
                            > >
                            >


                            _________________________________________________________________
                            Protect your PC - get McAfee.com VirusScan Online
                            http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
                          • Shane Kirkman
                            Very interesting Harley I will place an order when I have some spare cash Eat-Drink-Smoke and be Happy. Shane. ... From: Harley Daschund To:
                            Message 13 of 29 , Mar 1, 2003
                            • 0 Attachment
                              Very interesting Harley I will place an order when I have some spare cash
                               
                               

                              Eat-Drink-Smoke and be Happy.
                              Shane.
                               
                               
                              ----- Original Message -----
                              Sent: Friday, February 28, 2003 12:53 PM
                              Subject: Re: [new_distillers] needle valves versus ...

                              I work for a MAJOR mfg...as a Tool and Die Master...if you have a problem
                              with metric/SAE threads,I can supply you with USED (not worn out,very
                              suitable for thinner metal apps) SAE taps...you pay $1(US) + S&H ....limited
                              to 1" or smaller...:>)





                            Your message has been successfully submitted and would be delivered to recipients shortly.