- Can some one tell me what the heat up time is for a 2400 watt heating
element for 25 liters of wash ??
Also i am thinking of welding 2, 20 litre stock pots together so i
only have to do one run instead of 2, 12.5 litre ones, if i was to
install a heating element,would i be able to put it inside the stock
pot? and do i have to be carefull that i don't get one with a
thermostat????also does someone know what price they are and where i
can get one?
Assuming its starting at 15C, and will begin boiling at 94C, it will take
around 55 minutes, longer if you have high heat loss (eg windy around the
- Tony ..i just read the email where you said that you open the valve when you
get to 79deg,what do you mean by that?
ALso what sort of still head connection and pot do you use ,i just have a 19
litre cook pot and the still has a stainless steel bar welded to the bottom
of the head ,so i get a really good fit with the split tube seal ,there are
all sorts of sizes of clear tube that you can use ,also now with a column
full of pot ss i get more back pressure and i am starting to get a couple of
leaks at the start but a bit of tape where i get the leak stops any steam
from leaking very quickly ...i will take a couple of Pot ss out and see how
that goes..best of luck with it i find it so easy just to push the head on
and when i am done i just give it a coupe of knocks and it is diasembled for
cleaning:))also i just bought another pot so that i could just preheat the
other 12.5 litres before the other batch has finished and it has a spot on
fit with a tube with out grinding the very outside lip off ..so that was a
Tony & Elle Ackland wrote:
> Assuming its starting at 15C, and will begin boiling at 94C, it will take
> around 55 minutes, longer if you have high heat loss (eg windy around the
> To unsubscribe from this group, send an email to:
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>..i just read the email where you said that you open the valve when youI use the Nixon-Stone type of condensor (see http://www.gin-vodka.com ).
>get to 79deg,what do you mean by that?
Sorry I don't have a picture of mine yet, but Rob has posted one
previously, and its also at
http://www.geocities.com/kiwi_distiller/others.htm . This uses a manual
needle valve to regulate how much of the distillate is collected, and thus
by default, how much gets returned back to the column. When doing a normal
run, I alter this split to ensure that I'm providing enough reflux to get
the high purity I desire. At the end of the run, I want to collect the
remaining alcohol, but aren't too worried about its purity. So opening the
valve means that I collect it all, and return none as reflux.
ALso what sort of still head connection and pot do you use
The connection to the pot lid is a 1.5 inch to 1 inch reducing joint, with
a thread on the outside. Put it through the hole in the lid, and screw up
the outer nut. The pot is a sterilizing unit (for boiling jars of jam or
fruit in) called a Vacola.