Loading ...
Sorry, an error occurred while loading the content.

Re: [new_distillers] Reflux V Pot Stills

Expand Messages
  • Peter Davis
    OK, I`ll look ... From: M L To: new_distillers@yahoogroups.com Sent: Friday, April 12, 2013 8:40 AM Subject: Re: [new_distillers] Reflux V Pot Stills Davis, Ya
    Message 1 of 12 , Apr 11, 2013
    • 0 Attachment
      
      OK, I`ll look
      ----- Original Message -----
      From: M L
      Sent: Friday, April 12, 2013 8:40 AM
      Subject: Re: [new_distillers] Reflux V Pot Stills

       

      Davis, Ya ever seen the ones made by Mile High ? You can get a nice stainless steel one with an attatched liebig condenser, thermometer, bung and a tri-clamp so you can stick it right on you keg. Purdy sweet deals for under  $200

      --- On Thu, 4/11/13, davis668@... <davis668@...> wrote:

      From: davis668@... <davis668@...>
      Subject: Re: [new_distillers] Reflux V Pot Stills
      To: new_distillers@yahoogroups.com
      Date: Thursday, April 11, 2013, 11:37 AM

       

      Hello there mate

      Is there any chance that i could get some pics of your still

      I run a beer keg as a pot still, but I am thinking of a reflux,

       

      Cheers  Pete 


      ----- Original Message -----
      From:
      new_distillers@yahoogroups.com

      To:
      <new_distillers@yahoogroups.com>
      Cc:

      Sent:
      Thu, 11 Apr 2013 17:27:25 -0000
      Subject:
      [new_distillers] Reflux V Pot Stills


       

      In the forum I read alot of new comer comments about what type of still to build or buy.

      When I first started this hobby, I researched the internet and the forum to get a handle on how the distillation processes worked. I decided that I would like the flexibility to reflux or pot still. I like to tinker, so I decided to build my own still. I use a 15 gallon beer keg as the boiler. I built two heads for my still, a reflux column and a column with a lyne arm. The bases for the columns are identical so both bolt to the beer keg in the same manner. I spent similar amounts of money on constructing the two columns.

      Other distillers either add or remove column packing to change between relux or pot distilling.

      My suggestion to new comers is buy or buid a still that allows you to the flexibility use your boiler as either a reflux or pot still. It might cost a bit more up front, but over the long haul, you will be glad that you did.

    • TODP
      Watch what ya say about Mile High on here!! Not too many fans of or for them!! I have been using with great results and accrediting Mile High for a few years..
      Message 2 of 12 , Apr 11, 2013
      • 0 Attachment
        Watch what ya say about Mile High on here!! Not too many fans of or for them!!

         I have been using with great results and accrediting Mile High for a few years.. NEVER a problem with the quality or products they make!!
        ONLY problem is ordering as they are 45 days behind right now... so if you DO order, be prepared to wait a bit for your order after you pay for it! All orders are special order and made after ordered!! Anything else in stock far as fermenting materials or brewing equipment goes out next day!!
         CALL Mike an talk to him....


        On Thu, Apr 11, 2013 at 6:40 PM, M L wrote:

           Davis, Ya ever seen the ones made by Mile High ? You can get a nice stainless steel one with an attatched liebig condenser, thermometer, bung and a tri-clamp so you can stick it right on you keg. Purdy sweet deals for under  $200

        --- On Thu, 4/11/13, davis668@... <davis668@...> wrote:

        From: davis668@... <davis668@...>
        Subject: Re: [new_distillers] Reflux V Pot Stills
        To: new_distillers@yahoogroups.com
        Date: Thursday, April 11, 2013, 11:37 AM

         

        Hello there mate
        Is there any chance that i could get some pics of your still
        I run a beer keg as a pot still, but I am thinking of a reflux,
         
        Cheers  Pete 



        ----- Original Message -----
        From:
        new_distillers@yahoogroups.com
        To:
        <new_distillers@yahoogroups.com>
        Cc:

        Sent:
        Thu, 11 Apr 2013 17:27:25 -0000
        Subject:
        [new_distillers] Reflux V Pot Stills


          In the forum I read alot of new comer comments about what type of still to build or buy.

        When I first started this hobby, I researched the internet and the forum to get a handle on how the distillation processes worked. I decided that I would like the flexibility to reflux or pot still. I like to tinker, so I decided to build my own still. I use a 15 gallon beer keg as the boiler. I built two heads for my still, a reflux column and a column with a lyne arm. The bases for the columns are identical so both bolt to the beer keg in the same manner. I spent similar amounts of money on constructing the two columns.

        Other distillers either add or remove column packing to change between relux or pot distilling.

        My suggestion to new comers is buy or buid a still that allows you to the flexibility use your boiler as either a reflux or pot still. It might cost a bit more up front, but over the long haul, you will be glad that you did.



      • jsducote
        Not sure where this statement comes from. I did some searching in the archives and didn t find anything bad. If there are people saying bad things, they re not
        Message 3 of 12 , Apr 15, 2013
        • 0 Attachment
          Not sure where this statement comes from. I did some searching in the archives and didn't find anything bad. If there are people saying bad things, they're not writing them down.


          --- In new_distillers@yahoogroups.com, TODP <danimae@...> wrote:
          >
          > Watch what ya say about Mile High on here!! Not too many fans of or for
          > them!!
        • M L
          Yup, A long waiting period for a unit could be testimony to the quality of their product. The hobby is really growing, faster than some manufacturers can keep
          Message 4 of 12 , Apr 15, 2013
          • 0 Attachment
            Yup, A long waiting period for a unit could be testimony to the quality of their product. The hobby is really growing, faster than some manufacturers can keep up. And good , high quality equipment is worth waiting for. If I were to buy a ready made unit I would highly consider one from Mile High.

            --- On Mon, 4/15/13, jsducote <jsducote@...> wrote:

            From: jsducote <jsducote@...>
            Subject: [new_distillers] Re: Reflux V Pot Stills
            To: new_distillers@yahoogroups.com
            Date: Monday, April 15, 2013, 9:51 AM

             

            Not sure where this statement comes from. I did some searching in the archives and didn't find anything bad. If there are people saying bad things, they're not writing them down.

            --- In new_distillers@yahoogroups.com, TODP <danimae@...> wrote:
            >
            > Watch what ya say about Mile High on here!! Not too many fans of or for
            > them!!

          • allibugger
            Everyone making stills today says their s is the best. There are plenty of us who don t have the desire (talent) to build a still that will produce very
            Message 5 of 12 , Apr 15, 2013
            • 0 Attachment
              Everyone making stills today says their's is the best. There are plenty of us who don't have the desire (talent) to build a still that will produce very drinlable product. Don't knock a Mile HI still unless you have operated one. Bitch about the time to get one if you will, but don't even think about bitching about the quality. If you want a high quality stainless steel boiler and tower that can be converted from pot to reflux in 5 minutes, this is an excellent choice. If you want to build a cheap still out of the junk yard, go for it. If you want damn good product in the 90-95% AVB range, Mile HI has a still for you. If you can't wait 6 weeks to get it, you are not serious about making good alcohol.

              Alli

              --- In new_distillers@yahoogroups.com, M L <kekedog13@...> wrote:
              >
              > Davis, Ya ever seen the ones made by Mile High ? You can get a nice stainless steel one with an attatched liebig condenser, thermometer, bung and a tri-clamp so you can stick it right on you keg. Purdy sweet deals for under  $200
              >
              > --- On Thu, 4/11/13, davis668@... <davis668@...> wrote:
              >
              > From: davis668@... <davis668@...>
              > Subject: Re: [new_distillers] Reflux V Pot Stills
              > To: new_distillers@yahoogroups.com
              > Date: Thursday, April 11, 2013, 11:37 AM
              >
              >
              >
              >
              >
              >
              >
              >
              >
              >
              >
              >
              >
              >
              >
              >
              >  
              >
              >
              >
              >
              >
              >
              >
              >
              >
              > Hello there mate
              > Is there any chance that i could get some pics of your still
              > I run a beer keg as a pot still, but I am thinking of a reflux,
              >  
              > Cheers  Pete 
              >
              >
              >
              > ----- Original Message -----
              >
              > From:new_distillers@yahoogroups.com
              > To:<new_distillers@yahoogroups.com>
              > Cc:
              > Sent:Thu, 11 Apr 2013 17:27:25 -0000
              > Subject:[new_distillers] Reflux V Pot Stills
              >
              >
              >  
              >
              >
              >
              > In the forum I read alot of new comer comments about what type of still to build or buy.
              >
              > When I first started this hobby, I researched the internet and the forum to get a handle on how the distillation processes worked. I decided that I would like the flexibility to reflux or pot still. I like to tinker, so I decided to build my own still. I use a 15 gallon beer keg as the boiler. I built two heads for my still, a reflux column and a column with a lyne arm. The bases for the columns are identical so both bolt to the beer keg in the same manner. I spent similar amounts of money on constructing the two columns.
              >
              > Other distillers either add or remove column packing to change between relux or pot distilling.
              >
              > My suggestion to new comers is buy or buid a still that allows you to the flexibility use your boiler as either a reflux or pot still. It might cost a bit more up front, but over the long haul, you will be glad that you did.
              >
            • TODP
              THANK YOU!!! Been backing them for a few years way before I got on this group. GLAD to see someone else on here that can see the forest for all the trees! On
              Message 6 of 12 , Apr 15, 2013
              • 0 Attachment
                THANK YOU!!! Been backing them for a few years way before I got on this group. GLAD to see someone else on here that can see the forest for all the trees!


                On Mon, Apr 15, 2013 at 7:57 PM, allibugger wrote:

                   Everyone making stills today says their's is the best.  There are plenty of us who don't have the desire (talent) to build a still that will produce very drinlable product.  Don't knock a Mile HI still unless you have operated one.  Bitch about the time to get one if you will, but don't even think about bitching about the quality.  If you want a high quality stainless steel boiler and tower that can be converted from pot to reflux in 5 minutes, this is an excellent choice. If you want to build a cheap still out of the junk yard, go for it.  If you want damn good product in the 90-95% AVB range, Mile HI has a still for you.  If you can't wait 6 weeks to get it, you are not serious about making good alcohol.

                Alli

                --- In new_distillers@yahoogroups.com, M L <kekedog13@...> wrote:
                >
                > Davis, Ya ever seen the ones made by Mile High ? You can get a nice stainless steel one with an attatched liebig condenser, thermometer, bung and a tri-clamp so you can stick it right on you keg. Purdy sweet deals for under  $200
                >
                > --- On Thu, 4/11/13, davis668@... <davis668@...> wrote:
                >
                > From: davis668@... <davis668@...>
                > Subject: Re: [new_distillers] Reflux V Pot Stills
                > Date: Thursday, April 11, 2013, 11:37 AM
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >  
                >
                >
                >
                >
                >
                >
                >
                >
                >
                >       Hello there mate
                > Is there any chance that i could get some pics of your still
                > I run a beer keg as a pot still, but I am thinking of a reflux,
                >  
                > Cheers  Pete 
                >
                >
                >
                > ----- Original Message -----
                >
                > Cc:
                > Sent:Thu, 11 Apr 2013 17:27:25 -0000
                > Subject:[new_distillers] Reflux V Pot Stills
                >
                >
                >  
                >
                >
                >
                > In the forum I read alot of new comer comments about what type of still to build or buy.
                >
                > When I first started this hobby, I researched the internet and the forum to get a handle on how the distillation processes worked. I decided that I would like the flexibility to reflux or pot still. I like to tinker, so I decided to build my own still. I use a 15 gallon beer keg as the boiler. I built two heads for my still, a reflux column and a column with a lyne arm. The bases for the columns are identical so both bolt to the beer keg in the same manner. I spent similar amounts of money on constructing the two columns.
                >
                > Other distillers either add or remove column packing to change between relux or pot distilling.
                >
                > My suggestion to new comers is buy or buid a still that allows you to the flexibility use your boiler as either a reflux or pot still. It might cost a bit more up front, but over the long haul, you will be glad that you did.
                >

              • Jerry McCullough
                Sorry to take so long but here are the pics ________________________________ From: davis668@supernerd.com.au To:
                Message 7 of 12 , Apr 16, 2013
                Sorry to take so long but here are the pics

                From: "davis668@..." <davis668@...>
                To: new_distillers@yahoogroups.com
                Sent: Thursday, April 11, 2013 1:37 PM
                Subject: Re: [new_distillers] Reflux V Pot Stills
                 
                Hello there mate
                Is there any chance that i could get some pics of your still
                I run a beer keg as a pot still, but I am thinking of a reflux,
                 
                Cheers  Pete 


                ----- Original Message -----
                From:
                new_distillers@yahoogroups.com

                To:
                <new_distillers@yahoogroups.com>
                Cc:

                Sent:
                Thu, 11 Apr 2013 17:27:25 -0000
                Subject:
                [new_distillers] Reflux V Pot Stills


                 
                In the forum I read alot of new comer comments about what type of still to build or buy.

                When I first started this hobby, I researched the internet and the forum to get a handle on how the distillation processes worked. I decided that I would like the flexibility to reflux or pot still. I like to tinker, so I decided to build my own still. I use a 15 gallon beer keg as the boiler. I built two heads for my still, a reflux column and a column with a lyne arm. The bases for the columns are identical so both bolt to the beer keg in the same manner. I spent similar amounts of money on constructing the two columns.

                Other distillers either add or remove column packing to change between relux or pot distilling.

                My suggestion to new comers is buy or buid a still that allows you to the flexibility use your boiler as either a reflux or pot still. It might cost a bit more up front, but over the long haul, you will be glad that you did.

              • Jim Graves
                Hey Jerry,  do you remove your ceramics out of the column when you use the still as a pot?  Mine that I built is exactly the same as yours and I just open up
                Message 8 of 12 , Apr 16, 2013
                • 0 Attachment
                  Hey Jerry,  do you remove your ceramics out of the column when you use the still as a pot?  Mine that I built is exactly the same as yours and I just open up the valve and close the reflux valve and let her rip, column full of ceramics rings with a piece of copper netting holding them in on the bottom.  Good taste and fast, takes about 4 hours to run 12 gallons...
                   


                  From: Jerry McCullough <jkmccull@...>
                  To: "new_distillers@yahoogroups.com" <new_distillers@yahoogroups.com>
                  Sent: Tuesday, April 16, 2013 8:46 AM
                  Subject: Re: [new_distillers] Reflux V Pot Stills [7 Attachments]

                   
                  Sorry to take so long but here are the pics

                  From: "davis668@..." <davis668@...>
                  To: new_distillers@yahoogroups.com
                  Sent: Thursday, April 11, 2013 1:37 PM
                  Subject: Re: [new_distillers] Reflux V Pot Stills
                   
                  Hello there mate
                  Is there any chance that i could get some pics of your still
                  I run a beer keg as a pot still, but I am thinking of a reflux,
                   
                  Cheers  Pete 


                  ----- Original Message -----
                  From:
                  new_distillers@yahoogroups.com

                  To:
                  <new_distillers@yahoogroups.com>
                  Cc:

                  Sent:
                  Thu, 11 Apr 2013 17:27:25 -0000
                  Subject:
                  [new_distillers] Reflux V Pot Stills


                   
                  In the forum I read alot of new comer comments about what type of still to build or buy.

                  When I first started this hobby, I researched the internet and the forum to get a handle on how the distillation processes worked. I decided that I would like the flexibility to reflux or pot still. I like to tinker, so I decided to build my own still. I use a 15 gallon beer keg as the boiler. I built two heads for my still, a reflux column and a column with a lyne arm. The bases for the columns are identical so both bolt to the beer keg in the same manner. I spent similar amounts of money on constructing the two columns.

                  Other distillers either add or remove column packing to change between relux or pot distilling.

                  My suggestion to new comers is buy or buid a still that allows you to the flexibility use your boiler as either a reflux or pot still. It might cost a bit more up front, but over the long haul, you will be glad that you did.



                • Jerry McCullough
                  I choose to build a separate column to pot still. Look at the pics of the still with the lyne arm mounted. I am retired and was another project to keep me
                  Message 9 of 12 , Apr 17, 2013
                  • 0 Attachment
                    I choose to build a separate column to pot still. Look at the pics of the still with the lyne arm mounted. I am retired and was another project to keep me busy. 

                    From: Jim Graves <jimbull34@...>
                    To: "new_distillers@yahoogroups.com" <new_distillers@yahoogroups.com>
                    Sent: Tuesday, April 16, 2013 10:57 AM
                    Subject: Re: [new_distillers] Reflux V Pot Stills
                     
                    Hey Jerry,  do you remove your ceramics out of the column when you use the still as a pot?  Mine that I built is exactly the same as yours and I just open up the valve and close the reflux valve and let her rip, column full of ceramics rings with a piece of copper netting holding them in on the bottom.  Good taste and fast, takes about 4 hours to run 12 gallons...
                     

                    From: Jerry McCullough <jkmccull@...>
                    To: "new_distillers@yahoogroups.com" <new_distillers@yahoogroups.com>
                    Sent: Tuesday, April 16, 2013 8:46 AM
                    Subject: Re: [new_distillers] Reflux V Pot Stills [7 Attachments]
                     
                    Sorry to take so long but here are the pics

                    From: "davis668@..." <davis668@...>
                    To: new_distillers@yahoogroups.com
                    Sent: Thursday, April 11, 2013 1:37 PM
                    Subject: Re: [new_distillers] Reflux V Pot Stills
                     
                    Hello there mate
                    Is there any chance that i could get some pics of your still
                    I run a beer keg as a pot still, but I am thinking of a reflux,
                     
                    Cheers  Pete 

                    ----- Original Message -----
                    From:
                    new_distillers@yahoogroups.com

                    To:
                    <new_distillers@yahoogroups.com>
                    Cc:

                    Sent:
                    Thu, 11 Apr 2013 17:27:25 -0000
                    Subject:
                    [new_distillers] Reflux V Pot Stills


                     
                    In the forum I read alot of new comer comments about what type of still to build or buy. When I first started this hobby, I researched the internet and the forum to get a handle on how the distillation processes worked. I decided that I would like the flexibility to reflux or pot still. I like to tinker, so I decided to build my own still. I use a 15 gallon beer keg as the boiler. I built two heads for my still, a reflux column and a column with a lyne arm. The bases for the columns are identical so both bolt to the beer keg in the same manner. I spent similar amounts of money on constructing the two columns. Other distillers either add or remove column packing to change between relux or pot distilling. My suggestion to new comers is buy or buid a still that allows you to the flexibility use your boiler as either a reflux or pot still. It might cost a bit more up front, but over the long haul, you will be glad that you did.
                  Your message has been successfully submitted and would be delivered to recipients shortly.