Loading ...
Sorry, an error occurred while loading the content.

Re: [new_distillers] Malting

Expand Messages
  • Fredrick Lee
    This is correct. Everything in this game is time and temperature. If you don t know both, you ve lost control. When I say cooking I mean mashing Look up
    Message 1 of 20 , Feb 13, 2013
    • 0 Attachment
      This is correct. Everything in this game is time and temperature. 

      If you don't know both, you've lost control. 


      When I say "cooking" I mean "mashing"   

      Look up your mashing charts and determine the sweetness profile you want for your mash. 

      Time and temperature. EVERY STEP. 

      On Feb 13, 2013, at 12:28 AM, Henk Stuurman <hstuurman@...> wrote:

       

      If you use malted grains you never boil them. The malted grains got the enzymes to break down the strarches, Never boil them, only boil the unmalted grains.


      From: last2blast <last2blast@...>
      To: new_distillers@yahoogroups.com
      Sent: Tuesday, February 12, 2013 4:18 AM
      Subject: [new_distillers] Malting

       
      Just wondered if anyone has ever individually malted corn, barley, and rye for use in a wash?

      Do you still need to cook those grains if you malt them all?

      My thinking about malting grains in an attempt to try avoiding the cooking process. Once you malt them you crush them and grind some barley for the enzymes.

      Robert



    • RLB
      Thanks!  I was hoping that malting all my grains would eliminate the cooking process because it will be very difficult for me to maintain grain temp at 150 F
      Message 2 of 20 , Feb 13, 2013
      • 0 Attachment
        Thanks!  I was hoping that malting all my grains would eliminate the cooking process because it will be very difficult for me to maintain grain temp at 150 F for an hour and then rapidly cool it to add yeast.

        Robert



        From: Henk Stuurman <hstuurman@...>
        To: "new_distillers@yahoogroups.com" <new_distillers@yahoogroups.com>
        Sent: Wednesday, February 13, 2013 12:28 AM
        Subject: Re: [new_distillers] Malting

         
        If you use malted grains you never boil them. The malted grains got the enzymes to break down the strarches, Never boil them, only boil the unmalted grains.


        From: last2blast <last2blast@...>
        To: new_distillers@yahoogroups.com
        Sent: Tuesday, February 12, 2013 4:18 AM
        Subject: [new_distillers] Malting

         
        Just wondered if anyone has ever individually malted corn, barley, and rye for use in a wash?

        Do you still need to cook those grains if you malt them all?

        My thinking about malting grains in an attempt to try avoiding the cooking process. Once you malt them you crush them and grind some barley for the enzymes.

        Robert





      • Jeff Kimble
        You still need to mash/lauter them at 150F or close to it. But never boil them. Malting brings out enzymes that operate best at 148-152F. They work at
        Message 3 of 20 , Feb 14, 2013
        • 0 Attachment
          You still need to  mash/lauter them at 150F or close to it.    But never boil them.

          Malting brings out enzymes that operate best at 148-152F.  They work at lower temperatures as well, but 150F is the fastest range.  The easiest way to keep your mash  at 150F is insulation.   I wrap my brew kettle with blankets, others use coolers.  

          Then you need to rinse the grains to extract all the sugars/wort.  You can ferment on the grain as well, but I don't.

          Search the home brew sites for all grain brewing methods, whiskey is no different.

          Finally, you don't need to rapidly chill it..  Search for No-Chill home brewing.  As long as you keep the wort clean/sealed, it can chill on it's own, letting you pitch the yeast once it's fully chilled.  



          On Wed, Feb 13, 2013 at 7:19 AM, RLB <last2blast@...> wrote:
           

          Thanks!  I was hoping that malting all my grains would eliminate the cooking process because it will be very difficult for me to maintain grain temp at 150 F for an hour and then rapidly cool it to add yeast.

          Robert



          From: Henk Stuurman <hstuurman@...>
          To: "new_distillers@yahoogroups.com" <new_distillers@yahoogroups.com>
          Sent: Wednesday, February 13, 2013 12:28 AM
          Subject: Re: [new_distillers] Malting

           
          If you use malted grains you never boil them. The malted grains got the enzymes to break down the strarches, Never boil them, only boil the unmalted grains.


          From: last2blast <last2blast@...>
          To: new_distillers@yahoogroups.com
          Sent: Tuesday, February 12, 2013 4:18 AM
          Subject: [new_distillers] Malting

           
          Just wondered if anyone has ever individually malted corn, barley, and rye for use in a wash?

          Do you still need to cook those grains if you malt them all?

          My thinking about malting grains in an attempt to try avoiding the cooking process. Once you malt them you crush them and grind some barley for the enzymes.

          Robert






        • TODP
          What about using ground corn? Does it have to be cooked before making a mash to release the starches to convert to sugars or can it be added direct with sugars
          Message 4 of 20 , Feb 14, 2013
          • 0 Attachment
            What about using ground corn? Does it have to be cooked before making a mash to release the starches to convert to sugars or can it be added direct with sugars and  yeast as is? Any benefits to cooking prior?


            On Wed, Feb 13, 2013 at 10:19 AM, RLB wrote:

               Thanks!  I was hoping that malting all my grains would eliminate the cooking process because it will be very difficult for me to maintain grain temp at 150 F for an hour and then rapidly cool it to add yeast.

            Robert




            ___________________________________

            From: Henk Stuurman <hstuurman@...>
            To: "new_distillers@yahoogroups.com" <new_distillers@yahoogroups.com>
            Sent: Wednesday, February 13, 2013 12:28 AM
            Subject: Re: [new_distillers] Malting

              If you use malted grains you never boil them. The malted grains got the enzymes to break down the strarches, Never boil them, only boil the unmalted grains.


            ___________________________________

            From: last2blast <last2blast@...>
            To: new_distillers@yahoogroups.com
            Sent: Tuesday, February 12, 2013 4:18 AM
            Subject: [new_distillers] Malting

              Just wondered if anyone has ever individually malted corn, barley, and rye for use in a wash?

            Do you still need to cook those grains if you malt them all?

            My thinking about malting grains in an attempt to try avoiding the cooking process.  Once you malt them you crush them and grind some barley for the enzymes.

            Robert






          • Bill Rogers
            to cool it, look at what the beer guys do for wort chillers and such.
            Message 5 of 20 , Feb 14, 2013
            • 0 Attachment
              to cool it, look at what the beer guys do for wort chillers and such.  


              On Wed, Feb 13, 2013 at 9:19 AM, RLB <last2blast@...> wrote:
               

              Thanks!  I was hoping that malting all my grains would eliminate the cooking process because it will be very difficult for me to maintain grain temp at 150 F for an hour and then rapidly cool it to add yeast.

              Robert



              From: Henk Stuurman <hstuurman@...>
              To: "new_distillers@yahoogroups.com" <new_distillers@yahoogroups.com>
              Sent: Wednesday, February 13, 2013 12:28 AM
              Subject: Re: [new_distillers] Malting

               
              If you use malted grains you never boil them. The malted grains got the enzymes to break down the strarches, Never boil them, only boil the unmalted grains.


              From: last2blast <last2blast@...>
              To: new_distillers@yahoogroups.com
              Sent: Tuesday, February 12, 2013 4:18 AM
              Subject: [new_distillers] Malting

               
              Just wondered if anyone has ever individually malted corn, barley, and rye for use in a wash?

              Do you still need to cook those grains if you malt them all?

              My thinking about malting grains in an attempt to try avoiding the cooking process. Once you malt them you crush them and grind some barley for the enzymes.

              Robert






            • John Rucker
              I basically treat grains, corn, etc. like I do any all grain beer recipe and do the mash/lauter process, but then again I ve been brewing for 30 years and have
              Message 6 of 20 , Feb 14, 2013
              • 0 Attachment
                I basically treat grains, corn, etc. like I do any all grain beer recipe and do the mash/lauter process, but then again I've been brewing for 30 years and have equipment to do it. For a 5 gallon batch, I use 1.25 quarts of water per pound of grain and let the grains steep for an hour at 155 F in a mash/lauter tun (aka a converted cooler), slowly drain off the liquid produced and re-run it through the mash tun and then sparge it by running 5 gallons of 180F water through the grain. Then I boil the mixture for an hour. 

                Pretty much your basic all grain brewing, although many folks don't do the optional double mash and of course there are no hops involved.

                For cooling, the conventional methods are either an ice/water bath or a wort chiller (or plate chillers - even fancier and more expensive).

                What you might consider - and I've been brewing beer like this the past year with no issues - is to do it Australian "no chill" style and basically leave your hot wort in the fermenter, with the air lock in place to keep the bad stuff from getting in, and then adding the yeast the following day after it has cooled sufficiently.  Beer yeast is a tad more sensitive than the dried champagne yeast I've used for fermentation experiments so depending on when you create your mash, you may be able to add yeast later the same day. Me, I'm old and lazy and just add yeast the following morning.

                Here's a link or you can google "no chill beer"  Like I say, I've had no issues with a variety of beer types and I figure wash is considerably less picky than mash is.



                On Feb 14, 2013, at 1:07 PM, Bill Rogers <bill.rogers@...> wrote:

                 

                to cool it, look at what the beer guys do for wort chillers and such.  


                On Wed, Feb 13, 2013 at 9:19 AM, RLB <last2blast@...> wrote:
                 

                Thanks!  I was hoping that malting all my grains would eliminate the cooking process because it will be very difficult for me to maintain grain temp at 150 F for an hour and then rapidly cool it to add yeast.

                Robert



                From: Henk Stuurman <hstuurman@...>
                To: "new_distillers@yahoogroups.com" <new_distillers@yahoogroups.com>
                Sent: Wednesday, February 13, 2013 12:28 AM
                Subject: Re: [new_distillers] Malting

                 
                If you use malted grains you never boil them. The malted grains got the enzymes to break down the strarches, Never boil them, only boil the unmalted grains.


                From: last2blast <last2blast@...>
                To: new_distillers@yahoogroups.com
                Sent: Tuesday, February 12, 2013 4:18 AM
                Subject: [new_distillers] Malting

                 
                Just wondered if anyone has ever individually malted corn, barley, and rye for use in a wash?

                Do you still need to cook those grains if you malt them all?

                My thinking about malting grains in an attempt to try avoiding the cooking process. Once you malt them you crush them and grind some barley for the enzymes.

                Robert









              • ballard_bootlegger
                Hello my favorite forum. I have malted barley in the past so I am familiar with the process. Now I am considering sprouting some grain and tossing that right
                Message 7 of 20 , Mar 3, 2013
                • 0 Attachment
                  Hello my favorite forum. I have malted barley in the past so I am familiar with the process. Now I am considering sprouting some grain and tossing that right in the kettle to convert my non-malted grain.

                  My question, "Is the kilning/drying actually necessary for conversion?"

                  A beer brewer reminded me about the wet milling issue and I figured there's no need to count on the minimal malt for starch so no need to crack. Without cracking, though, are the enzymes still dispersed? Has anyone ever mashed non-heated or dried malt? If so, did the wet malt have less of the flavor you'd normally expect from your malt, pre and post distillation? Is it even called malt if it hasn't been roasted or dried?

                  Thanks!
                  Whitney.
                • waljaco
                  Green malt is used by homedistillers for converting. You need to wet dried malt anyway to activate the enzymes. wal
                  Message 8 of 20 , Mar 3, 2013
                  • 0 Attachment
                    Green malt is used by homedistillers for converting. You need to wet dried malt anyway to activate the enzymes.
                    wal

                    --- In new_distillers@yahoogroups.com, "ballard_bootlegger" <meriwetherdistilleries@...> wrote:
                    >
                    > Hello my favorite forum. I have malted barley in the past so I am familiar with the process. Now I am considering sprouting some grain and tossing that right in the kettle to convert my non-malted grain.
                    >
                    > My question, "Is the kilning/drying actually necessary for conversion?"
                    >
                    > A beer brewer reminded me about the wet milling issue and I figured there's no need to count on the minimal malt for starch so no need to crack. Without cracking, though, are the enzymes still dispersed? Has anyone ever mashed non-heated or dried malt? If so, did the wet malt have less of the flavor you'd normally expect from your malt, pre and post distillation? Is it even called malt if it hasn't been roasted or dried?
                    >
                    > Thanks!
                    > Whitney.
                    >
                  • ballard_bootlegger
                    Thanks Wal. I m going to give this a shot with a little rye. I ll report any difference in taste or performance.
                    Message 9 of 20 , Mar 4, 2013
                    • 0 Attachment
                      Thanks Wal. I'm going to give this a shot with a little rye. I'll report any difference in taste or performance.

                      --- In new_distillers@yahoogroups.com, "waljaco" <waljaco@...> wrote:
                      >
                      > Green malt is used by homedistillers for converting. You need to wet dried malt anyway to activate the enzymes.
                      > wal
                      >
                    • waljaco
                      The green sprouting part is not particularly wanted as it contains substances to prevent bugs eating it - in dried malt it is removed. wal
                      Message 10 of 20 , Mar 4, 2013
                      • 0 Attachment
                        The green sprouting part is not particularly wanted as it contains substances to prevent bugs eating it - in dried malt it is removed.
                        wal

                        --- In new_distillers@yahoogroups.com, "ballard_bootlegger" <meriwetherdistilleries@...> wrote:
                        >
                        > Thanks Wal. I'm going to give this a shot with a little rye. I'll report any difference in taste or performance.
                        >
                        > --- In new_distillers@yahoogroups.com, "waljaco" <waljaco@> wrote:
                        > >
                        > > Green malt is used by homedistillers for converting. You need to wet dried malt anyway to activate the enzymes.
                        > > wal
                        > >
                        >
                      • RLB
                        Thank you, I did not think about that part. Robert ________________________________ From: waljaco To: new_distillers@yahoogroups.com
                        Message 11 of 20 , Mar 4, 2013
                        • 0 Attachment
                          Thank you, I did not think about that part.

                          Robert



                          From: waljaco <waljaco@...>
                          To: new_distillers@yahoogroups.com
                          Sent: Monday, March 4, 2013 7:35 PM
                          Subject: [new_distillers] Re: Malting

                           
                          The green sprouting part is not particularly wanted as it contains substances to prevent bugs eating it - in dried malt it is removed.
                          wal

                          --- In new_distillers@yahoogroups.com, "ballard_bootlegger" wrote:
                          >
                          > Thanks Wal. I'm going to give this a shot with a little rye. I'll report any difference in taste or performance.
                          >
                          > --- In new_distillers@yahoogroups.com, "waljaco" wrote:
                          > >
                          > > Green malt is used by homedistillers for converting. You need to wet dried malt anyway to activate the enzymes.
                          > > wal
                          > >
                          >



                        • ballard_bootlegger
                          Thanks Wal. I m going to give this a shot with a little rye. I ll report any difference in taste or performance.
                          Message 12 of 20 , Mar 12, 2013
                          • 0 Attachment
                            Thanks Wal. I'm going to give this a shot with a little rye. I'll report any difference in taste or performance.

                            --- In new_distillers@yahoogroups.com, "waljaco" <waljaco@...> wrote:
                            >
                            > Green malt is used by homedistillers for converting. You need to wet dried malt anyway to activate the enzymes.
                            > wal
                            >
                          • last2blast
                            If group members are serious about hobby, moonshine, or legal distilling, I highly suggest that you take the time to really learn how to malt grains and how
                            Message 13 of 20 , Jan 26, 2014
                            • 0 Attachment
                              If group members are serious about hobby, moonshine, or legal distilling, I highly suggest that you take the time to really learn how to malt grains and how that malting process will change the flavor of your distillate.  We see TV shows like "Moonshiners" where they toss the grain into a stream and pull it out to sprout, and then dry it in the sun.  What I am learning about malting makes me shake my head in amazement because it truly is a science and art combined into one.

                              If you want to make a wonderfully flavored spirit, you need to learn the ins and outs of malting.  For example: You can malt grain to increase sugar content, and you can malt in such a way the will enhance enzymes or kill enzymes in grains.

                              Robert L. Bliven 

                            Your message has been successfully submitted and would be delivered to recipients shortly.