Re: time question
- B-W was referring to area, so it's not an insignificant increase.
0.196 in^2 vs 0.110 in^2 = 77.8% increase in area (per inch of length for volume of the gas)
But I don't believe cross-sectional area is the critical factor. Surface area for condensation is what's important: 2*pi*r*l.
1.57 in^2 per inch of length vs. 1.18 in^2 per inch of length = 33% increase in surface area. (Same percentage increase as from 3/8 to 1/2 , not 25%)
Owing to other inefficiencies (non-linear nature of vapor condensation, etc.) and inaccuracy of measurement, I think a 25% increase in speed would not be an unreasonable expectation in this case.
--- In email@example.com, RLB wrote:
> Simple: 3/8th = 3 divided by 8 = 0.375"
> 4/8 or 122 = 4 divided by 8 = 0.50"
> 0.500 - 0.375 = 0.125 or 1/8
> Not a lot of difference, but bigger is faster
> From: Blackhat-Whitedog
> 3/8th vs 4/8th is about 25% larger should mean that much faster (I did the pi r squared and that made it seem twice as big...math makes my head hurt...or is that the 4 roses)
- SOBERANIA ALIMENTARIA Y ACCESSO A LA SALUD POR EL DERECHO DE LOS PUEBLOS A ALIMENTARSE Y EJERCER SU SOBERNAIA ALIMENTARIA EN EL SALON EVA PERON MUNICIPIO DE LOMAS DE ZAMORA PROVINCIA DE BUENOS AIRES MANUEL CASTRO 220 PRIMER PISO
De: RLB <last2blast@...>
Para: "firstname.lastname@example.org" <email@example.com>
Enviado: martes, 5 de febrero de 2013 17:17
Asunto: Re: [new_distillers] time question
1/2 tubing will make you happier, but for a good lesson test both.
From: Ricky R. <rrogers10@...>
Sent: Tuesday, February 5, 2013 3:10 PM
Subject: [new_distillers] time question
ok I haven't run my my pressure cooker yet,but I have to ask this first...right now its a 16 quart with 3/8 copper tubing on it,as I'm on a budget...going through some of my shed I found a piece of 1/2 inch..how much would this increase my collection times ? gotta ask..thanks also for all the help I have been receiving lately too,most helpful