Re: hydrometer reading
- HelloThe wash that I make.I start with 1 pound of malting rye and 1 pound of malting barley, ground.I place it in my fermenter and pour in 2 ½ gallons of water at 180 degrees.I let set for ½ hour then add 14 pounds of sugar, then fill up with cool water. When the temp is about 80 I add the yeast. I use a whiskey yeast.I let it work for about 2 weeks then run through the still.I filter it and place it in milk jugs with charred white oak and a small amount of cherry wood.When finished it is like a Irish whiskey.
- Adjust your potential alcohol, to 10% - 12% either by diluting with water or adding more brown sugar. Prevents stressing the yeast and gives a good ABV in the final distillation.From: maximus_308 <kreman1@...>
Sent: Friday, December 21, 2012 10:13 PM
Subject: [new_distillers] hydrometer reading
I was reading this the other day and I was a bit confused where it said (near the end)take a hydrometer reading and adjust as needed. My question is what should the hydrometer reading be and how would you adjust it?
BLACK BEARDS RUM
Two pounds of brown sugar per one gallon of water and one cup of honey for every ten gallon batch. Starting hydrometer reading of about 90. Do not exceed 100. Add 1 to 3 ozs of yeast per 10 gallons of mash.
Heat one fourth of your water to 120 or 130 degrees only hot enough to melt the sugar, then stir in your sugar and then the honey last. Pour it into your fermenter and finish filling with cool water to cool it down to 80 degrees. Take a hydrometer reading and adjust as needed. The add your yeast. 6 to 14 days to ferment.
- Hey, Cal, I was wondering . You say to top it up with cool water , how many gallons do you top it up to ?
--- In email@example.com, Cal Anderson <cpa59@...> wrote:
> The wash that I make.
> I start with 1 pound of malting rye and 1 pound of malting
> barley, ground.
> I place it in my fermenter and pour in 2 ½ gallons of water
> at 180 degrees.
> I let set for ½ hour then add 14 pounds of sugar, then fill
> up with cool water. When the temp is about 80 I add the yeast. I use a whiskey yeast.
> I let it work for about 2 weeks then run through the still.
> I filter it and place it in milk jugs with charred white oak
> and a small amount of cherry wood.
> When finished it is like a Irish whiskey.